Weider Pro Pt 800 Bench Bedienungsanleitung

USERʼS MANUAL

Model No. WEEVBE1495.1

Serial No.

Write the serial number in the

space above for reference.

Serial

Number

Decal

CAUTION

Read all precautions and instruc-

tions in this manual before using

this equipment. Keep this manual

for future reference. www.iconeurope.com

QUESTIONS?

If you have questions, or if there are

missing parts, please contact us:

Call: 08457 089 009

From Ireland: 00 (44) 53 9236102

Website: www.iconsupport.eu

E-mail: [email protected]

Write:

ICON Health & Fitness, Ltd.

c/o HI Group PLC

Express Way

Whitwood, West Yorkshire

WF10 5Q

WARNING DECAL PLACEMENT

WEIDER is a registered trademark of IC N IP, Inc.

This drawing shows the location(s) of the

warning decal(s). If a decal is missing

or illegible, see the front cover of this

manual and request a free replacement

decal. Apply the decal in the location

shown. Note: The decal(s) may not be

shown at actual size.

TABLE OF CONTENTS

WARNINGDECALPLACEMENT ..............................................................2

IMP RTANTPRECAUTI NS ................................................................3

BEF REY UBEGIN ......................................................................4

PARTIDENTIFICATI NCHART ..............................................................5

ASSEMBLY ...............................................................................6

ADJUSTMENTS ..........................................................................11

EXERCISEGUIDELINES ...................................................................12

PARTLIST ..............................................................................14

EXPL DEDDRAWING ....................................................................15

RDERINGREPLACEMENTPARTS ..................................................BackCover

WARNING: To reduce the risk of serious injury, read all important precautions and

instructions in this manual and all warnings on your exercise rack before using your exercise rack.

ICON assumes no responsibility for personal injury or property damage sustained by or through the

use of this product.

1. Read all instructions in this manual

and all

warnings on the

exercise rack before using

the exercise rack. Use the exercise rack only

as described in this manual.

2. It is the responsibility of the owner to ensure

that all users of the exercise rack are ade-

quately informed of all precautions.

3. The exercise rack is intended for home use

only. Do not use the exercise rack in any

commercial, rental, or institutional setting.

Keep the

exercise rack

indoors, away from

moisture and dust. Place the

exercise rack

a level surface, with a mat beneath it to pro-

tect the floor or carpet. Make sure that there

is enough clearance around the

exercise rack

to mount, dismount, and use the

exercise

rack

5. Keep children under 12 and pets away from

the exercise rack at all times.

6. Make sure all parts are properly tightened

each time the exercise rack is used. Replace

any worn parts immediately.

7. Always wear athletic shoes for foot protec-

tion while exercising.

The exercise rack is designed to support a

maximum user weight of 300 lbs. (136 kg).

9. The exercise rack is not designed to be used

with weights. Do not use weights or other

forms of resistance with the exercise rack.

10. If you feel pain or dizziness at any time while

exercising, stop immediately and begin cool-

ing down.

IMPORTANT PRECAUTIONS

Pull-up Arm

Arm Pad

Dip Arm

Foot Rest

Backrest

Handles

Handle

Thank you for selecting the versatile WEIDER®PR

PT 800 exercise rack. The exercise rack is designed

to help you develop the major muscle groups of the

upper body. Whether your goal is to tone your body,

build dramatic muscle size and strength, or improve

your cardiovascular system, the exercise rack will help

you to achieve the specific results you want.

For your benefit, read this manual carefully before

using the exercise rack. If you have questions after

reading this manual, please see the front cover of this

manual. To help us assist you, note the product model

number and serial number before contacting us. The

model number and the location of the serial number

decal are shown on the front cover of this manual.

Before reading further, please look at the drawing

below and familiarize yourself with the parts that are

labeled.

Upright

BEFORE YOU BEGIN

ASSEMBLED DIMENSI NS:

Height: 7 ft. (213 cm)

Width: 3 ft. 5 in. (104 cm)

Depth: 3 ft. 8 in. (112 cm)

M10 x 90mm Bolt (19)

M10 x 30mm Screw (20)

M10 x 215mm Bolt (22)

M10 x 95mm Bolt (27)

M10 x 65mm Screw (29)

M10 x 70mm Screw (31)

M10 Locknut (25)

M4 x 16mm Self-tapping Screw (24)

M6 Washer (15)

M6 x 65mm Screw (21)

M10 x 75mm Screw (36)

M10 Washer (30)

PART IDENTIFICATION CHART

Refer to the drawings below to identify small parts used in assembly. The number

in parentheses by each drawing is the key number of the part, from the PART

LIST near the end of this manual. IMPORTANT: If you cannot find a part in the

hardware kit, check to see if it has been preassembled.

rient the two Base Frames (1), the Center

Base (4), and the Rear Base (35) as shown.

Make sure that the large warning decal on

the Rear Base is in the position shown.

Attach the Center Base (4) to the two Base

Frames (1) with four M10 x 90mm Bolts (19),

four M10 Washers (30), and four M10 Locknuts

(25). Do not tighten the Locknuts yet.

Attach the Rear Base (35) to the two Base

Frames (1) in the same way.

Large

Warning

Decal

ASSEMBLY

To make assembly easier, carefully read the

following information and instructions:

• Assembly requires two persons.

• Because of its weight and size, the exercise rack

should be assembled in the location where it will

be used. Make sure that there is enough clear-

ance to walk around the exercise rack as you

assemble it.

• Place all parts in a cleared area and remove the

packing materials. Do not dispose of the packing

materials until assembly is completed.

• For help identifying small parts, use the PART

IDENTIFICATI N CHART on page 5.

•The following tools (not included) may be required

for assembly:

two adjustable wrenches

one rubber mallet

one standard screwdriver

one Phillips screwdriver

Assembly may be more convenient if you have a

socket set, a set of open-end or closed-end

wrenches, or a set of ratchet wrenches.

Before beginning assembly, make sure

that you understand the information in

the box above.

3. Attach the Support (5) to the Rear Base (35)

with two M10 x 90mm Bolts (19) and two M10

Locknuts (25). Do not tighten the Locknuts

yet.

Insert the Upright (3) into the Upright Base (2).

Attach the Upright (3) and the Support (5) to the

Upright Base (2) with four M10 x 30mm Screws

(20).

See steps 1–3. Tighten the M10 Locknuts (25).

2. Attach the Upright Base (2) to the Center Base

(4) with two M10 x 95mm Bolts (27) and two

M10 Locknuts (25). Do not tighten the

Locknuts yet.

4. Attach the Left Handle (9) to the Left Pull-up

Arm (34) with an M10 x 65mm Screw (29), an

M10 x 70mm Screw (31), and two M10

Washers (30).

Press a 50mm Round Inner Cap (12) into the

Left Pull-up Arm (34). Make sure that the thick

side of the Cap is on the side shown.

Attach the Right Handle (8) to the Right Pull-

up Arm (7) in the same way.

5. Insert the Left Pull-up Arm (34) into the Upright

(3).

Attach the Left Pull-up Arm (34) to the Upright

(3) with an M10 x 75mm Screw (36) and an

M10 Washer (30). Do not tighten the Screw

yet.

Attach the Left Pull-up Arm (34) with an M10 x

70mm Screw (31), an M10 Washer (30), and an

M10 Locknut (25). Then, tighten the M10 x

75mm Screw (36).

Attach the Right Pull-up Arm (7) to the

Upright (3) in the same way.

30 25

Thick

Side

Thick

Side

6. rient the Right and Left Dip Arms (6, 33) as

shown. Slide the Left Dip Arm onto the Right

Dip Arm.

Attach the Right and Left Dip Arms (6, 33) with

two M10 x 65mm Screws (29), two M10

Washers (30), and two M10 Locknuts (25).

7. Apply some of the included grease to the M10 x

215mm Bolt (22).

Attach the Right and Left Dip Arms (6, 33) to

the Upright (3) with the M10 x 215mm Bolt (22)

and an M10 Locknut (25). Do not overtighten

the Locknut; the Dip Arms must pivot easily.

Attach the tether on the Pin (23) to the Upright

(3) with an M4 x 16mm Self-tapping Screw (24).

Insert the Pin (23) into the hole in the Left Dip

Arm (33) and into the Upright (3).

Tether

Grease

Hole

9. Attach the Backrest (11) to the Upright (3) with

two M6 x 65mm Screws (21) and two M6

Washers (15).

10. Make sure that all parts are properly tightened before you use the exercise rack.

15 21

8. Attach an Arm Pad (10) to the Right Dip Arm (6)

with two M6 x 65mm Screws (21) and two M6

Washers (15).

Wet a Short Foam Grip (16) and the indicated

handle on the Right Dip Arm (6) with soapy

water.

Press a Bushing (18), the Short Foam Grip (16),

and a 28mm Round Inner Cap (14) onto the

handle on the Right Dip Arm (6).

Repeat this step for the Left Dip Arm (33).

Handle

Andere Handbücher für Pro Pt 800 Bench

Dieses Handbuch passt für folgende Modelle

Andere Weider Fitnessgeräte Handbücher

Weider

Weider PRO 120 Bedienungsanleitung

Weider

Weider Victory SM11 Bedienungsanleitung

Weider

Weider PRO 4300 Bedienungsanleitung

Weider

Weider 1120 Bedienungsanleitung

Weider

Weider 220 Bedienungsanleitung

Weider

Weider LX7 Bedienungsanleitung

Weider

Weider 130 TC Bedienungsanleitung

Weider

Weider Pro Pt 800 Bench Benutzerhandbuch

Weider

Weider Total Body Works 5000 Bench Benutzerhandbuch

Weider

Weider Pro 7500 Bedienungsanleitung

Weider

Weider 2990 I Bedienungs- und Wartungshandbuch

Weider

Weider PowerPak WEMC06740 Bedienungsanleitung

Weider

Weider Wfs Series 129 Bedienungsanleitung

Weider

Weider 2980 X Bedienungsanleitung

Weider

Weider Total Body Works 5000 Bench Bedienungsanleitung

Weider

Weider 138 Bedienungsanleitung

Weider

Weider Victory X25 Power Guide Bedienungsanleitung

Weider

Weider PRO 800 Bedienungsanleitung

Weider

Weider 240 Tc Bench Bedienungsanleitung

Weider

Weider Sa 1-22 Standard Bench Bedienungsanleitung

Weider

Weider 2990 I Systemhandbuch

Weider

Weider Pro 7000 Bedienungsanleitung

Weider

Weider WEEVSY52000 Bedienungsanleitung

Weider

Weider Xc5 Skimaster Bedienungsanleitung

Beliebte Fitnessgeräte Handbücher anderer Marken

NSD

NSD PB-188P Bedienungsanleitung

Performance

Performance HyperVibe Bedienungsanleitung

Scalamobil

Scalamobil S27 Bedienungsanleitung

Precor

Precor Experience Series Bedienungsanleitung

FYTTER

FYTTER RedMIUM BENCH BE-T6R Bedienungsanleitung

Taurus

Taurus TF-RK1312 Bedienungsanleitung

Nustep

Nustep T5 Bedienungsanleitung

Precor

Precor CW-507 Bedienungsanleitung

Movement

Movement BICEPS Idea Bedienungsanleitung

Kegel8

Kegel8 V For Men Bedienungsanleitung

BLK BOX

BLK BOX 21-0122-0B Bedienungsanleitung

Stamina

Stamina aeropilates premier 299 Bedienungsanleitung

SPORTSTECH

SPORTSTECH PBX300 Bedienungsanleitung

ParaBody

ParaBody Serious Steel 877102 Bedienungsanleitung

Weslo

Weslo Gym 650 Bedienungsanleitung

Rebel

Rebel ACTIVE RBA-1011 Bedienungsanleitung

4iiii

4iiii FLiiiight Bedienungsanleitung

Image

Image 540 Bedienungsanleitung