Weslo Cadence 200 Treadmill Bedienungsanleitung

Model No. WETL14805.1

Serial No.

Write the serial number in the

space above for future reference.

CAUTION

Read all precautions and instruc-

tions in this manual before using

this equipment. Save this manual

for future reference.

USER'S MANUAL

Serial

Number

Decal

QUESTIONS?

As a manufacturer, we are com-

mitted to providing complete

customer satisfaction. If you

have questions, or if there are

missing or damaged parts,

please call:

or write:

ICON Health & Fitness, Ltd.

Customer Service Department

Unit 4

Revie Road Industrial Estate

Revie Road

Beeston

Leeds, LS118JG

email: [email protected]

08457 089 009

TABLE OF CONTENTS

IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

OPERATION AND ADJUSTMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

HOW TO FOLD AND MOVE THE TREADMILL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

CONDITIONING GUIDELINES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

ORDERING REPLACEMENT PARTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Back Cover

Note: A PART IDENTIFICATION CHART, an EXPLODED DRAWING, and a PART LIST are attached in the

center of this manual.

WESLO is a registered trademark of ICON IP, Inc.

1. It is the responsibility of the owner to ensure

that all users of this treadmill are adequately

informed of all warnings and precautions.

2. Use the treadmill only as described.

3. Place the treadmill on a level surface, with at

least 2.5 m (8 ft.) of clearance behind it and

0.5 m (2 ft.) on each side. Do not place the

treadmill on any surface that blocks air open-

ings. To protect the floor or carpet from dam-

age, place a mat under the treadmill.

4. Keep the treadmill indoors, away from mois-

ture and dust. Do not put the treadmill in a

garage or covered patio, or near water.

5. Do not operate the treadmill where aerosol

products are used or where oxygen is being

administered.

6. Keep children under the age of 12 and pets

away from the treadmill at all times.

7. The treadmill should not be used by persons

weighing more than 115 kg (250 lbs.).

8. Never allow more than one person on the

treadmill at a time.

9. Wear appropriate exercise clothes while using

the treadmill. Do not wear loose clothes that

could become caught in the treadmill. Athletic

support clothes are recommended for both

men and women.

Always wear athletic shoes.

Never use the treadmill with bare feet, wear-

ing only stockings, or in sandals.

10. When connecting the power cord (see page

10), plug the power cord into an earthed cir-

cuit. No other appliance should be on the

same circuit. When replacing the fuse, an

ASTA approved BS1362 type should be fitted

to the fuse carrier. A 13 amp fuse should be

used.

11. If an extension cord is needed, use only a 3-

conductor, 1mm2(14-gauge) cord that is no

longer than 1.5 m (5 ft.).

12. Keep the power cord away from heated sur-

faces.

13. Never move the walking belt while the power

is turned off. Do not operate the treadmill if

the power cord or plug is damaged, or if the

treadmill is not working properly. (See TROU-

BLESHOOTING if the treadmill is not working

properly.)

14. Never start the treadmill while you are stand-

ing on the walking belt. Always hold the

handrails while using the treadmill.

15. The treadmill is capable of high speeds.

Adjust the speed in small increments to

avoid sudden jumps in speed.

16. The pulse sensor is not a medical device.

Various factors, including your movement, may

affect the accuracy of heart rate readings. The

pulse sensor is intended only as an exercise

aid in determining heart rate trends in general.

17. Never leave the treadmill unattended while it

is running. Always remove the key, unplug

the power cord, and move the on/off switch

to the off position when the treadmill is not in

use. (See the drawing on page 5 for the loca-

tion of the on/off switch.)

18. Do not attempt to raise, lower, or move the

treadmill until it is properly assembled. (See

ASSEMBLY and HOW TO MOVE THE TREAD-

MILL.) You must be able to safely lift 45

pounds (20 kg) to raise, lower, or move the

treadmill.

19. Do not change the incline of the treadmill by

placing objects under the treadmill.

20. When folding or moving the treadmill, make

sure that the storage latch is fully closed.

21. Inspect and properly tighten all parts of the

treadmill regularly.

22. Never drop or insert any object into any

opening.

WARNING: To reduce the risk of burns, fire, electric shock, or injury to persons, read

the following important precautions and information before operating the treadmill.

IMPORTANT PRECAUTIONS

23. DANGER: Always unplug the power

cord immediately after use, before cleaning

the treadmill, and before performing the

maintenance and adjustment procedures

described in this manual. Never remove the

motor hood unless instructed to do so by an

authorized service representative. Servicing

other than the procedures in this manual

should be performed by an authorized ser-

vice representative only.

24. This treadmill is intended for in-home use

only. Do not use this treadmill in any com-

mercial, rental, or institutional setting.

WARNING: Before beginning this or any exercise program, consult your physician.

This is especially important for persons over the age of 35 or persons with pre-existing health prob-

lems. Read all instructions before using. ICON assumes no responsibility for personal injury or prop-

erty damage sustained by or through the use of this product.

SAVE THESE INSTRUCTIONS

The decal shown here has been placed on the treadmill. If the decal is missing, or if it is not legible, call

the toll-free telephone number on the front cover of this manual and order a free replacement decal.

Apply the decal in the location shown. Note: The decal is not shown at actual size.

50%

BEFORE YOU BEGIN

Thank you for selecting the new WESLO®CADENCE

200 treadmill. The CADENCE 200 treadmill is

designed to help you reach your exercise goals in the

convenience and privacy of your home. And when

you’re not exercising, the unique CADENCE 200 can

be folded up, requiring less than half the floor space of

other treadmills.

or your benefit, read this manual carefully before

using the treadmill.If you have questions after read-

ing this manual, please see the front cover of this

manual. To help us assist you, please note the product

model number and serial number before contacting

us. The model number of the treadmill is

WETL14805.1. The serial number can be found on a

decal attached to the treadmill (see the front cover of

this manual for the location).

Before reading further, please familiarise yourself with

the parts that are labelled in the drawing below.

Handrail

Console

Storage Latch

Key/Clip

Circuit Breaker

On/Off Switch

Walking Belt

Foot Rails

Incline Leg

Incline Pin

FRONT

BACK

RIGHT SIDE

Rear Roller

Adjustment Bolts

Water Bottle Holder*

*No water bottle is included

Accessory Tray

ASSEMBLY

Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials; do not

dispose of the packing materials until assembly is completed.

Note: The underside of the treadmill walking belt is coated with high-performance lubricant. During shipping, a

small amount of lubricant may be transferred to the top of the walking belt or the shipping carton. This does not

affect treadmill performance. If there is lubricant on top of the walking belt, simply wipe off the lubricant with a

soft cloth and a mild, non-abrasive cleaner.

Assembly requires the included hex keys and your own phillips screwdriver , two

adjustable spanners , and needlenose pliers .

To identify the assembly hardware, see the PART IDENTIFICATION CHART in the center of this manual.

WARNING: Do not plug in the power

cord until the treadmill is completely assembled.

1. Orient the Base (46) so the holes for the four Base Pads

(63) are on top. Attach the four Base Pads to the Base

with the four 1” Tek Screws (5).

Attach the two Wheels (68) to the Base (46) with two 2”

Bolts (62) and two Wheel Nuts (13) as shown. Do not

overtighten the Bolts; the Wheels must be able to

turn freely.

2. Identify the Right Handrail (59), which has a large hole in

one side. Have a second person hold the Base (46) in a

vertical position, with the Base Pads (63) on the side

shown. Next, hold the Right Handrail against the Base so

the large hole is in the position shown. Attach the Right

Handrail with two 2 1/2” Bolts (65) and two 5/16” Nuts

(61), and a 2” Bolt (62) and a 3/8” Nut (56) as shown. Do

not tighten the Bolts yet.

Attach the Left Handrail (not shown) to the Base (46) in

the same way.

Large Hole

3. Hold a Frame Spacer (27) against the right side of the

Frame (79) as shown. Insert a 4” Bolt (70) into the indi-

cated hole in the Frame Spacer and the Frame. Next,

tighten a 3/4” Tek Screw (3) into the Frame Spacer and

the Frame. Then, remove the Bolt. Repeat this step on

the other side of the Frame.

4. Raise the Right Handrail (59) and the Left Handrail (not

shown) so the Base (46) is flat on the floor. Position the

Handrails near the Frame (79).

Locate the Wire Harness (60). Next, locate the long

piece of tape in the large hole near the lower end of the

Right Handrail (59). Wrap the end of the tape around the

end of the Wire Harness as shown in drawing 4a. Then,

tighten the included plastic tie securely around the tape

and the Wire Harness as shown in drawing 4b.

5. Carefully pull the opposite end of the tape to pull the

Wire Harness (60) up through the Right Handrail (59)

and out of the hole in the side of the Right Handrail.

Attach the end of the ground wire to the Right Handrail

(59) with the Silver Ground Screw (69).

Remove the tape from the Wire Harness (60).

Tape

4a 4b

Tie

Tape

Ground Wire

7. Hold the Console Base (52) near the Right Handrail (59)

and the Left Handrail (not shown). Insert the Wire

Harness (60) through the looped plastic tie and then

through the hole in the Console Base.

Tie

8. Hold the Console (55) near the Console Base (52).

Touch the Right Handrail (59) to discharge any static.

Connect the end of the Wire Harness (60) to the back of

the Console (55) in the location shown by the arrow. The

connector should slide easily into the socket and

snap into place (see drawing 8b). If the connector does

not slide easily and snap into place, turn the connector

and then insert it. IF THE CONNECTOR IS NOT

INSERTED PROPERLY, THE CONSOLE MAY BE DAM-

AGED WHEN THE POWER IS TURNED ON.

6. With the help of a second person, lift and hold the

Frame between the Handrails. Finger tighten a 4” Bolt

(70) with a 3/8” Washer (66) and a 3/8” Star Washer

(29) through the Right Handrail and the Frame Spacer

(27) into the Frame. Do not tighten the Bolt yet.

Repeat this step on the left side of the treadmill.

12. Make sure that all parts used in assembly are properly tightened before you use the treadmill. Keep

the included hex key in a secure place; the hex key is used to adjust the walking belt (see page 17). Topro-

tect the floor or carpet, place a mat under the treadmill.

10. Lower the Handrails (53, 59) until they are touching the

floor.

See 10a. Position the Handrails (53, 59) so the treadmill

Frame (79) is centered between them.

Firmly tighten the four 2 1/2” Bolts (65), the two 2” Bolts

(62), and the two 3 1/2” Bolts (70). Be careful not to

overtighten the Bolts.

53, 59

Top View

10a

9. Securely tighten a plastic tie around the Wire Harness

(60) and under the indicated hook on the Console (55) to

prevent the Wire Harness from slipping. Tighten the plas-

tic tie and cut off the end.

See drawing 9a. Set the Console (55) in the Console Base

(52). Make sure that the Wire Harness (not shown) is

not pinched. Next, set the Console Base on the Handrails

(53, 59). Insert as much of the Wire Harness as possible

into the hole in the Right Handrail (59). See step 7.

Tighten the plastic tie and cut off the end.

Loosely thread six 3/4” Screws (2) into the Console Base

(52) and the Console (55). Loosely thread four 3/4”

Screws into the Handrails (only two Screws are shown).

Start all ten Screws and then tighten them; do not

overtighten the Screws.

Tie

Hook

52 55

59 53

Knob

Spring

Large Hole

Collar

11. Orient the Latch Housing (48) so the large hole is on the

indicated side. Attach the Latch Housing to the Left

Handrail (53) with two 3/4” Screws (2); start both Latch

Screws and then tighten them.

Remove the knob from the pin. Make sure that the collar

and the spring are on the pin. (Note: If there are two col-

lars, place one on each side of the spring.) Next, insert

the pin into the Latch Housing (48). Then, tighten the

knob back onto the pin.

THE PRE-LUBRICATED WALKING BELT

Your treadmill features a walking belt coated with high-performance lubricant. IMPORTANT: Never apply sili-

cone spray or other substances to the walking belt or the walking platform. Such substances will deteri-

orate the walking belt and cause excessive wear.

HOW TO PLUG IN THE POWER CORD

This product must be earthed. If it should malfunction or break

down, earthing provides a path of least resistance for electric cur-

rent to reduce the risk of electric shock. This product is equipped

with a power cord having an equipment-earthing conductor and an

earthing plug. Important: If the power cord is damaged, it must

be replaced with a manufacturer-recommended power cord.

See drawing 1. Plug the indicated end of the power cord into the

socket on the treadmill.

See drawing 2. Press the pins on the power cord into the metal clips

in the adapter as shown. Close the adapter cover over the end of

the power cord and tighten the screw in the adapter.Important:

Make sure that the adapter cover is secure and the screw has

been tightened before using the power cord.

See drawing 3. Plug the power cord into an appropriate outlet that is

properly installed and earthed in accordance with all local codes and

ordinances. Important: The treadmill is not compatible with

GFCI-equipped outlets.

DANGER: Improper connection of the equipment-earthing conductor can result in an

increased risk of electric shock. Check with a qualified electrician or serviceman if you are in doubt

as to whether the product is properly earthed. Do not modify the plug provided with the product—if it

will not fit the outlet, have a proper outlet installed by a qualified electrician.

FR/SP

Socket on treadmill

Metal

Clips

Pins

Screw

Adapter

Outlet

Adapter

Cover

OPERATION AND ADJUSTMENT

Andere Handbücher für Cadence 200 Treadmill

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Weslo Tretmühle Handbücher

Weslo

Weslo Cadence 450v Treadmill Bedienungs- und Wartungshandbuch

Weslo

Weslo Cadence 85 Benutzerhandbuch

Weslo

Weslo Cadence G 5.9 Treadmill Bedienungsanleitung

Weslo

Weslo Cadence C44 Treadmill Bedienungsanleitung

Weslo

Weslo Cadence 300 Treadmill Bedienungs- und Wartungshandbuch

Weslo

Weslo Cadence G 7.0 WLTL39810.0 Bedienungsanleitung

Weslo

Weslo CADENCE c22 Bedienungsanleitung

Weslo

Weslo Cadence 3260 Bedienungsanleitung

Weslo

Weslo Cadence S6 Treadmill Bedienungsanleitung

Weslo

Weslo Cadence 75 Treadmill Systemhandbuch

Weslo

Weslo Cadence 955 Bedienungsanleitung

Weslo

Weslo Cadence M5 Treadmill Bedienungsanleitung

Weslo

Weslo WLTL19010 Bedienungsanleitung

Weslo

Weslo Cadence 600 Treadmill Benutzerhandbuch

Weslo

Weslo Cadence G25 Treadmill Bedienungsanleitung

Weslo

Weslo WETL49710.0 Bedienungsanleitung

Weslo

Weslo Crosswalk 5.2t Treadmill Benutzerhandbuch

Weslo

Weslo Cadence 935 Treadmill Bedienungsanleitung

Weslo

Weslo Cadence 805 Bedienungsanleitung

Weslo

Weslo Cadence exi8 WLTL49200 Bedienungsanleitung

Weslo

Weslo CROSSWALK 5.2T Bedienungsanleitung

Weslo

Weslo Cadence 927 Bedienungsanleitung

Weslo

Weslo Cadence Ds11 Bedienungsanleitung

Weslo

Weslo Cadence 50 Ls Bedienungs- und Wartungshandbuch

Beliebte Tretmühle Handbücher anderer Marken

Treadly

Treadly TREADLY 2 Bedienungsanleitung

HEALTH ONE

HEALTH ONE Walk Ro Bedienungsanleitung

NordicTrack

NordicTrack T7.5 S Bedienungsanleitung

Gold's Gym

Gold's Gym ADVANTAGE GGTL12920 Bedienungsanleitung

Merax

Merax MS282992 Bedienungsanleitung

FYTTER

FYTTER RU-2SX Bedienungsanleitung

Precor

Precor 903 Bedienungsanleitung

FitLogic

FitLogic freewill d225 Bedienungsanleitung

HOP-SPORT

HOP-SPORT ESTIMA HS-3200LB Bedienungsanleitung

Horizon Fitness

Horizon Fitness Adventure 5 Plus Bedienungsanleitung

Stamia

Stamia InMotion II Bedienungsanleitung

Smooth Fitness

Smooth Fitness EVO 3i Bedienungsanleitung

NordicTrack

NordicTrack NETL81810.0 Bedienungsanleitung

Schwinn

Schwinn 830/Journey 8.0 Bedienungsanleitung

Keys Fitness

Keys Fitness HealthTrainer HT-740T Bedienungsanleitung

Spirit

Spirit XT8 Bedienungsanleitung

NordicTrack

NordicTrack T 14.0 Treadmill Bedienungsanleitung

Master

Master F22 Bedienungsanleitung