Weslo Cadence 5.0 Treadmill Bedienungsanleitung

USER’S MANUAL

Serial Number Decal

Model No. WETL10131

Serial No.

QUESTIONS?

As a manufacturer, we are com-

mitted to providing complete

customer satisfaction. If you

have questions, or if there are

missing or damaged parts,

please call:

Or write:

ICON Health & Fitness, Ltd.

Unit 4

Revie Road Industrial Estate

Revie Road, Beeston

Leeds, LS11 8JG

[email protected]

CAUTION

Read all precautions and instruc-

tions in this manual before using

this equipment. Save this manual

for future reference.

www.iconeurope.com

Visit our website at

08457 089 009

Class H Fitness Product

TABLE OF CONTENTS

IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

OPERATION AND ADJUSTMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10

HOW TO FOLD AND MOVE THE TREADMILL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13

MAINTENANCE AND TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15

CONDITIONING GUIDELINES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17

ORDERING REPLACEMENT PARTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Back Cover

Note: An EXPLODED DRAWING and a PART LIST are attached in the centre of this manual.

WESLO is a registered trademark of ICON Health & Fitness, Inc.

1. It is the responsibility of the owner to ensure

that all users of this treadmill are adequately

informed of all warnings and precautions.

2. Use the treadmill only as described in this

manual.

3. Place the treadmill on a level surface, with at

least 2.5 m (8 ft.) of clearance behind it and

0.5 m (2 ft.) on each side. Do not place the

treadmill on any surface that blocks air open-

ings. To protect the floor or carpet from dam-

age, place a mat under the treadmill.

4. Keep the treadmill indoors, away from mois-

ture and dust. Do not put the treadmill in a

garage or covered patio, or near water.

5. Do not operate the treadmill where aerosol

products are used or where oxygen is being

administered.

6. Keep children under the age of 12 and pets

away from the treadmill at all times.

7. The treadmill should not be used by persons

weighing more than 115 kg (250 lbs.).

8. Never allow more than one person on the

treadmill at a time.

9. Wear appropriate exercise clothes when

using the treadmill. Do not wear loose clothes

that could become caught in the treadmill.

Athletic support clothes are recommended for

both men and women. Always wear athletic

shoes. Never use the treadmill with bare feet,

wearing only stockings, or in sandals.

10. When connecting the power cord (see page

10), plug the power cord into an earthed cir-

cuit. No other appliance should be on the

same circuit. When replacing the fuse, an

ASTA approved BS1362 type should be fitted

to the fuse carrier. A 13 amp fuse should be

used.

11. If an extension cord is needed, use only a 3-

conductor, 1mm2(14-gauge) cord that is no

longer than 1.5 m (5 ft.).

12. Keep the power cord away from heated sur-

faces.

13. Never move the walking belt whilst the power

is turned off. Do not operate the treadmill if

the power cord or plug is damaged, or if the

treadmill is not working properly. (See

BEFORE YOU BEGIN on page 5 if the tread-

mill is not working properly.)

14. Never start the treadmill whilst you are stand-

ing on the walking belt. Always hold the

handrails whilst using the treadmill.

15. The treadmill is capable of high speeds.

Adjust the speed in small increments to avoid

sudden jumps in speed.

16. Never leave the treadmill unattended whilst it

is running. Always remove the key and unplug

the power cord when the treadmill is not in

use.

17. Do not attempt to raise, lower, or move the

treadmill until it is properly assembled. (See

ASSEMBLY on page 6 and HOW TO FOLD

AND MOVE THE TREADMILL on page 13.)

You must be able to safely lift 20 kg (45 lbs.)

to raise, lower, or move the treadmill.

18. When folding or moving the treadmill, make

sure that the storage latch is fully closed.

19. Do not change the incline of the treadmill by

placing objects under the treadmill.

20. Inspect and properly tighten all parts of the

treadmill regularly.

21. Never drop or insert any object into any

opening.

WARNING: To reduce the risk of burns, fire, electric shock, or injury to persons, read the

following important precautions and information before operating the treadmill.

IMPORTANT PRECAUTIONS

22. DANGER: Always unplug the power

cord immediately after use, before cleaning

the treadmill, and before performing the main-

tenance and adjustment procedures de-

scribed in this manual. Never remove the

motor hood unless instructed to do so by an

authorised service representative. Servicing

other than the procedures in this manual

should be performed by an authorised service

representative only.

23. This treadmill is intended for in-home use

only. Do not use this treadmill in any commer-

cial, rental, or institutional setting.

WARNING: Before beginning this or any exercise program, consult your physician. This

is especially important for persons over the age of 35 or persons with pre-existing health problems.

Read all instructions before using. ICON assumes no responsibility for personal injury or property

damage sustained by or through the use of this product.

SAVE THESE INSTRUCTIONS

The decal shown has been placed on your treadmill. If the decal is missing, or if it is not legible, please

call our Customer Service Department to order a free replacement decal (see ORDERING REPLACEMENT

PARTS on the back cover of this manual). Apply the replacement decal in the location shown.

Thank you for selecting the WESLO CADENCE®50

treadmill. The CADENCE 50 treadmill combines ad-

vanced technology with innovative design to let you

enjoy an excellent form of cardiovascular exercise in

the convenience and privacy of your home. And when

you’re not exercising, the unique CADENCE 50 tread-

mill can be folded up, requiring less than half the floor

space of other treadmills.

For your benefit, read this manual carefully before

using the treadmill. If you have questions after read-

ing this manual, please call our Customer Service

Department at 08457 089 009. To help us assist you,

please note the product model number and serial num-

ber before calling. The model number of the treadmill

is WETL10131. The serial number can be found on a

decal attached to the treadmill (see the front cover of

this manual for the location of the decal).

Before reading further, please review the drawing

below and familiarise yourself with the labelled parts.

BEFORE YOU BEGIN

Handrail

Console

Key/Clip

Circuit Breaker

Incline Leg

Walking Belt

Hood

Front Wheel

Foot Pad

Rear Roller

Adjustment Bolts

Water Bottle Holder

(Bottle not included)

Storage Latch RIGHT SIDE

LEFT SIDE

ASSEMBLY

Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials; do not

dispose of the packing materials until assembly is completed. Assembly requires the included hex key

and your own phillips screwdriver and adjustable spanners .

For help identifying the assembly hardware, refer to the drawings below. Note: The assembly hardware and

other small parts are packaged in separate part bags. Do not open the part bags until instructed to do so.

105

Plates

71 2

Hole

11a

1. Open part bag A. Identify the Right Upright (89), which

has a large round hole near the lower end.

See drawing 1a. Slide two U-nuts (105) into the lower

end of the Right Upright (89) as shown. Insert two U-

nuts into the Left Upright (not shown) in the same

way.

See drawing 1b. Attach the Left and Right Uprights (88,

89) to the Base (71) with four 3” Bolts (2) and four 5/16”

Washers (31). Make sure that the Uprights are ori-

ented so the indicated plates are facing each other.

In addition, make sure that the Base is oriented so

the Base Pads (19) are in the location shown.

WARNING: Do not plug in the power

cord until the treadmill is completely assembled.

Silver Ground

Screw (87)–1

1/4” Washer

(107)–4

5” Bolt (10)–2

3/8” Star Washer

(45)–2 5/16” Washer

(31)–4

U-nut (105)–4

3” Bolt (2)–4

1” Bolt (12)–4

Crossbar Screw (69)–2

1/2” Screw (84)–2 3/4” Screw (90)–10

3. Open part bag C. With the help of a second person,

raise the Left and Right Uprights (88, 89) to the vertical

position.

Identify the Right Handrail (6), which has a large hole in

the left side. Feed the Wire Harness (22) into the rectan-

gular bracket on the Right Handrail and out of the large

hole. Note: It may be helpful to use needlenose pliers to

pull the Wire Harness out of the hole.

Insert the rectangular bracket on the Right Handrail (6)

into the right Upright (89). Attach the Right Handrail with

two 1” Bolts (12) and two 1/4” Washers (107) as shown.

Do not tighten the Bolts yet.

Attach the Left Handrail (7) as described above. Note:

There is not a wire harness on the left side.

22 Hole

107

Wide

side

Plate

2. Open part bag B. Press the Right Frame Spacer (13) and

the Left Frame Spacer (not shown) onto the sides of the

Frame (55) as shown. Make sure that the high side of

each Spacer is facing forward as shown. With the help

of a second person, carefully lift the Frame and hold the

Spacers between the plates on the Uprights (89).

Align the hole in the plate on the Right Upright (89) with

the hole in the Right Frame Spacer (13). Loosely thread a

5” Bolt (10) and a 3/8” Star Washer (45) into the Spacer

and the Frame (55). Repeat this step on the left side of

the treadmill.

See drawing 2a. With the help of a second person, care-

fully tip the treadmill onto its left side as shown.

Feed the Wire Harness (22) into the large round hole near

the lower end of the Right Upright (89), and then pull the

Wire Harness out of the upper end as shown.

75 22

4. See the inset drawings and identify the two Crossbar

Screws (69); be careful not to confuse the Crossbar

Screws with the 3/4” Screws (90).

Hold the Crossbar (75) on the small brackets on the

Handrails (6, 7). Attach the Crossbar to the small brack-

ets with the two Crossbar Screws (69). Do not tighten

the Crossbar Screws yet.

Attach the end of the ground wire to the small hole in the

side of the Right Handrail (6) with a Silver Ground Screw

(87).

Small Bracket

6. Press the Book Rack (85) onto the Console Base (100) in

the location shown.

100

7. Hold the Console (1) near the Console Base (100).

Touch the Right Handrail (6) to discharge any static.

Find the connector on the end of the Wire Harness (22).

Insert the connector into the red socket beneath the

Console. The connector should slide easily into the

socket and snap into place. If the connector does

not slide easily and snap into place, turn the connec-

tor and then insert it. Make sure that the connector and

wires appear as shown in drawing 7a.

See drawing 5a. Insert the excess Wire Harness (22)

down into the opening in the Console Base (100).

Securely tighten the plastic tie on top of the Console

Base to prevent the Wire Harness from slipping.

Then, cut off the end of the plastic tie.

5. Open part bag D. Place the Console Base (100) on the

Right Handrail (6) and the Left Handrail (not shown).

Attach the Console Base with four 3/4” Screws (90) (only

two Screws are shown). Do not tighten the Screws yet.

Insert the Wire Harness (22) through the two indicated

plastic ties on the Console Base (100). Next, insert the

Wire Harness up through the opening beside the Wire

Cover (86). Make sure that the Wire Cover is securely at-

tached to the Console Base.

See drawing 5a. Look at the top of the Console Base

(100). Insert the Wire Harness (22) through the plastic tie

on top of the Console Base.

100

Ties

Tie

100

Ties

100

9. Attach the Latch Housing (41) to the Left Upright (88)

with two 3/4” Screws (90). Remove the Latch Knob (95)

from the Latch Pin (91). Make sure that the Latch Pin

Collar (93) and the Spring (94) are on the Latch Pin as

shown. Insert the Latch Pin into the Latch Housing, and

tighten the Latch Knob onto the Latch Pin.

Lift the treadmill frame to the storage position (see HOW

TO FOLD THE TREADMILL FOR STORAGE on page

13). Make sure that the frame is centered between the

Handrails (not shown). Firmly tighten all of the bolts

and screws used in assembly steps 2, 3, 4, 5, and 8.

Then, lower the frame to the floor.

10. Make sure that all parts are properly tightened before you use the treadmill. Note: Extra hardware may

be included. Keep the included hex keys in a secure place. The large hex key is used to adjust the walking

belt (see page 16). To protect the floor or carpet, place a mat under the treadmill.

Note: The underside of the treadmill walking belt is coated with high-performance lubricant. During shipping, a

small amount of lubricant may be transferred to the top of the walking belt or the shipping carton. This is a

normal condition and does not affect treadmill performance. If there is lubricant on top of the walking belt, sim-

ply wipe off the lubricant with a soft cloth and a mild, non-abrasive cleaner.

8. Set the Console (1) on the Console Base (100). Insert the

excess Wire Harness (22) into the large hole in the side of

the Right Handrail (6). Securely tighten the plastic ties

on the bottom of the Console Base to prevent the Wire

Harness from slipping. Then, cut off the ends of the plas-

tic ties.

Attach the Console (1) to the Console Base (100) with four

3/4” Screws (90) and two 1/2” Screws (84). Start all six

Screws before tightening them; do not overtighten

the Screws.

690

100

Ties

Large

Hole

OPERATION AND ADJUSTMENT

THE PERFORMANT LUBETM WALKING BELT

Your treadmill features a walking belt coated with PERFORMANT LUBETM, a high-performance lubricant. IMPOR-

TANT: Never apply silicone spray or other substances to the walking belt or the walking platform. Such

substances will deteriorate the walking belt and cause excessive wear.

HOW TO PLUG IN THE POWER CORD

This product must be earthed. If it should malfunction or break

down, earthing provides a path of least resistance for electric

current to reduce the risk of electric shock. This product is equipped

with a cord having an equipment-earthing conductor and an earth-

ing plug.

Two power cords are included. Select the one that will fit your

outlet. Refer to drawing 1. Plug the indicated end of the power

cord into the socket on the treadmill. Next, lift the tab on the

ferrite box and clamp the ferrite box around the power cord.

Fasten the included plastic tie just behind the ferrite box and

cut off the excess plastic tie. This will prevent the ferrite box

from sliding along the power cord. Refer to drawing 2. Plug the

power cord into an appropriate outlet that is properly installed

and earthed in accordance with all local codes and ordinances.

Note: In Italy, an adaptor (not included) must be used between

the power cord and the outlet. Important: The treadmill is not

compatible with GFCI-equipped outlets.

If the power cord is damaged, it must be replaced with a manufac-

turer-recommended power cord.

DANGER: Improper connection of the equipment-earthing conductor can result in an in-

creased risk of electric shock. Check with a qualified electrician or serviceman if you are in doubt as

to whether the product is properly earthed. Do not modify the plug provided with the product—if it

will not fit the outlet, have a proper outlet installed by a qualified electrician.

Socket on treadmill

Outlet

Tab

Ferrite Box

Plastic

Tie

Andere Handbücher für Cadence 5.0 Treadmill

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Weslo Tretmühle Handbücher

Weslo

Weslo WLTL29310.0 Bedienungsanleitung

Weslo

Weslo Cadence 600 Treadmill Kurzanleitung

Weslo

Weslo Cadence 800 Treadmill Kurzanleitung

Weslo

Weslo Sport 100 Treadmill Bedienungsanleitung

Weslo

Weslo WLTL39110 Bedienungsanleitung

Weslo

Weslo Cadence 4450 Bedienungsanleitung

Weslo

Weslo Cadence 85 Kurzanleitung

Weslo

Weslo Cadence 25 Treadmill Bedienungsanleitung

Weslo

Weslo WLTL33090 Bedienungsanleitung

Weslo

Weslo CADENCE EX14 WCTL29200 Bedienungsanleitung

Weslo

Weslo Cadence 5.2 W/pulse Bedienungsanleitung

Weslo

Weslo WLTL39112 Bedienungsanleitung

Weslo

Weslo Cadence 950 Bedienungsanleitung

Weslo

Weslo Cadence 85 Systemhandbuch

Weslo

Weslo Cadence 21.5 Treadmill Bedienungs- und Wartungshandbuch

Weslo

Weslo Cadence L 290 Bedienungsanleitung

Weslo

Weslo Crosswalk G 3.2 Treadmill Benutzerhandbuch

Weslo

Weslo Cadence 75 Treadmill Bedienungsanleitung

Weslo

Weslo CADENCE C78 Bedienungsanleitung

Weslo

Weslo easy compact 2 WETL20709.0 Bedienungsanleitung

Weslo

Weslo CADENCE 1005 Bedienungsanleitung

Weslo

Weslo Cadence M6 Elliptical Benutzerhandbuch

Weslo

Weslo Cadence 860 Treadmill Bedienungsanleitung

Weslo

Weslo Cadence LS 8 Bedienungsanleitung

Beliebte Tretmühle Handbücher anderer Marken

Treadly

Treadly TREADLY 2 Bedienungsanleitung

HEALTH ONE

HEALTH ONE Walk Ro Bedienungsanleitung

NordicTrack

NordicTrack T7.5 S Bedienungsanleitung

Gold's Gym

Gold's Gym ADVANTAGE GGTL12920 Bedienungsanleitung

Merax

Merax MS282992 Bedienungsanleitung

FYTTER

FYTTER RU-2SX Bedienungsanleitung

Precor

Precor 903 Bedienungsanleitung

FitLogic

FitLogic freewill d225 Bedienungsanleitung

HOP-SPORT

HOP-SPORT ESTIMA HS-3200LB Bedienungsanleitung

Horizon Fitness

Horizon Fitness Adventure 5 Plus Bedienungsanleitung

Stamia

Stamia InMotion II Bedienungsanleitung

Smooth Fitness

Smooth Fitness EVO 3i Bedienungsanleitung

NordicTrack

NordicTrack NETL81810.0 Bedienungsanleitung

Schwinn

Schwinn 830/Journey 8.0 Bedienungsanleitung

Keys Fitness

Keys Fitness HealthTrainer HT-740T Bedienungsanleitung

Spirit

Spirit XT8 Bedienungsanleitung

NordicTrack

NordicTrack T 14.0 Treadmill Bedienungsanleitung

Master

Master F22 Bedienungsanleitung