Weslo WCTL29607.0 Bedienungsanleitung

USER'S MANUAL

Model No. WCTL29607.0

Serial No.

CAUTION

Read all precautions and instruc-

tions in this manual before using

this equipment. Save this manual

for future reference.

www.proform.com

Visit our website at

www.weslo.com

Visit our website at

QUESTIONS?

As a manufacturer, we are com-

mitted to providing complete

customer satisfaction.If you

have questions, or if parts are

damaged or missing, PLEASE

CONTACT OUR CUSTOMER

SERVICE DEPARTMENT

DIRECTLY.

CALL TOLL-FREE:

1-888-936-4266

Mon.–Fri., 8:00 until 17:00 EST

(excluding holidays)

OR E-MAIL US:

[email protected]

Serial Number

Decal

Write the serial number in the space

above for future reference.

TABLE OF CONTENTS

WARNING DECAL PLACEMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

OPERATION AND ADJUSTMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12

HOW TO FOLD AND MOVE THE TREADMILL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17

TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19

EXERCISE GUIDELINES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21

PART LIST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23

EXPLODED DRAWING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24

ORDERING REPLACEMENT PARTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Back Cover

LIMITED WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Back Cover

WESLO is a registered trademark of ICON IP, Inc.

The decal shown here has been applied in the lo-

cation shown. If the decal is missing or illegi-

ble, call the telephone number on the front

cover of this manual and request a free re-

placement decal. Apply the decal in the loca-

tion shown. Note: The decal may not be shown

at actual size.

WARNING DECAL PLACEMENT

IMPORTANT PRECAUTIONS

1. Before beginning any exercise program, con-

sult your physician. This is especially impor-

tant for persons over the age of 35 or per-

sons with pre-existing health problems.

2. It is the responsibility of the owner to ensure

that all users of this treadmill are adequately

informed of all warnings and precautions.

3. Use the treadmill only as described.

4. Place the treadmill on a level surface, with at

least 8 ft (2.4 m) of clearance behind it and 2

ft. (0.5 m) on each side. Do not place the

treadmill on any surface that blocks air open-

ings. To protect the floor or carpet from dam-

age, place a mat under the treadmill.

5. Keep the treadmill indoors, away from mois-

ture and dust. Do not put the treadmill in a

garage or covered patio, or near water.

6. Do not operate the treadmill where aerosol

products are used or where oxygen is being

administered.

7. Keep children under the age of 12 and pets

away from the treadmill at all times.

8. The treadmill should not be used by persons

weighing more than 250 lbs. (113 kg).

9. Never allow more than one person on the

treadmill at a time.

10. Wear appropriate exercise clothes when

using the treadmill. Do not wear loose

clothes that could become caught in the

treadmill. Athletic support clothes are recom-

mended for both men and women.

Always

wear athletic shoes; never use the treadmill

with bare feet, wearing only stockings, or in

sandals.

11. When connecting the power cord (see page

12), plug the power cord into a surge suppres-

sor (not included) and plug the surge sup-

pressor into a grounded circuit capable of

carrying 15 or more amps. No other appliance

should be on the same circuit. Do not use an

extension cord.

12. Use only a single-outlet surge suppressor that

meets all of the specifications described on

page 12.

13. Failure to use a properly functioning surge

suppressor could result in damage to the con-

trol system of the treadmill. If the control sys-

tem is damaged, the walking belt may change

speed, accelerate, or stop unexpectedly,

which may result in a fall and serious injury.

14. Keep the power cord and the surge suppres-

sor away from heated surfaces.

15. Never move the walking belt while the power

is turned off. Do not operate the treadmill if

the power cord or plug is damaged, or if the

treadmill is not working properly. (See TROU-

BLESHOOTING on page 19 if the treadmill is

not working properly.)

16. Read, understand, and test the emergency

stop procedure before using the treadmill (see

HOW TO TURN ON THE POWER on page 13).

17. Never start the treadmill while you are stand-

ing on the walking belt. Always hold the

handrails while using the treadmill.

18. The pulse sensor is not a medical device.

Various factors, including your movement,

may affect the accuracy of heart rate readings.

The pulse sensor is intended only as an exer-

cise aid in determining heart rate trends in

general.

19. The treadmill is capable of high speeds.

Adjust the speed in small increments to

avoid sudden jumps in speed.

WARNING: To reduce the risk of serious injury, read all important precautions and in-

structions in this manual and all warnings on your treadmill before using your treadmill. ICON as-

sumes no responsibility for personal injury or property damage sustained by or through the use of

this product.

20. Never leave the treadmill unattended while it

is running. Always remove the key, unplug

the power cord, and switch the reset/off cir-

cuit breaker to the off position when the

treadmill is not in use. (See the drawing on

page 5 for the location of the circuit breaker.)

21. Do not attempt to raise, lower, or move the

treadmill until it is properly assembled. (See

ASSEMBLY on page 6 and HOW TO FOLD

AND MOVE THE TREADMILL on page 17.)

You must be able to safely lift 45 lbs. (20 kg)

to raise, lower, or move the treadmill.

22. When folding or moving the treadmill, make

sure that the storage latch is fully closed.

23. Do not change the incline of the treadmill by

placing objects under the treadmill.

24. Inspect and properly tighten all parts of the

treadmill regularly.

25. Never drop or insert any object into any

opening on the treadmill.

26. DANGER: Always unplug the power

cord immediately after use, before cleaning

the treadmill, and before performing the

maintenance and adjustment procedures de-

scribed in this manual. Never remove the

motor hood unless instructed to do so by an

authorized service representative. Servicing

other than the procedures in this manual

should be performed by an authorized ser-

vice representative only.

27. This treadmill is intended for in-home use

only. Do not use this treadmill in any com-

mercial, rental, or institutional setting.

SAVE THESE INSTRUCTIONS

Thank you for selecting the new WESLO®CADENCE

G-40 treadmill. The CADENCE G-40 treadmill combines

advanced technology with innovative design to help you

get the most from your exercise in the convenience of

your home. And when you’re not exercising, the CA-

DENCE G-40 treadmill can be folded up, requiring less

than half the floor space of other treadmills.

For your benefit, read this manual carefully before

using the treadmill.If you have questions after read-

ing this manual, please see the front cover of this man-

ual. To help us assist you, note the product model

number and serial number before contacting us. The

model number and the location of the serial number

decal are shown on the front cover of this manual.

Before reading further, please review the drawing

below and familiarize yourself with the labeled parts.

BEFORE YOU BEGIN

Handrail

Storage Latch

Console

Key/Clip

Reset/Off

Circuit Breaker

Power Cord

Walking Belt Hood

Wheel

Foot Rail

Rear Roller

Adjustment Bolts

Accessory Tray

1. Make sure that the power cord is unplugged.

Place a piece of cardboard under the tread-

mill frame to protect the floor during assem-

bly.

Have a second person hold the Base (52) in the

position shown.

Attach six Base Pads (63) to the Base (52) with

six 19mm Tek Screws (26).

26 63

Handrail Washer (11)–2

2 3/4” Bolt (47)–4 Star Washer (81)–4 Washer (29)–4

2 1/2” Bolt (56)–4

M10 Flat

Washer (14)–2

Ground Screw

(84)–1

M8 x 15mm

Bolt (8)–6

M10 Star

Washer (9)–2

M8 Star

Washer (5)–6

18mm Screw (58)–2

M10 x 58mm Bolt (2)–4

M10 x 110mm Bolt (1)–2

16mm Screw

(85)–2

M5 Star

Washer (7)–2

M8 Nut (46)–2

19mm Screw (10)–4

M8 Flat

Washer (72)–4

4” Bolt (120)–2

19mm Tek

Screw (26)–6

M6 Flat

Washer (32)–4

M6 Nut (43)–4

Wheel Housing Bolt (13)–4

M6 x 58mm Bolt (13)–4

M8 x 52mm Bolt (82)–2

ASSEMBLY

Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials; donot

dispose of the packing materials until assembly is completed. Note: The underside of the treadmill walking

belt is coated with high-performance lubricant. During shipping, a small amount of lubricant may be transferred to

the top of the walking belt or the shipping carton. This does not affect treadmill performance. If there is lubricant

on top of the walking belt, simply wipe off the lubricant with a soft cloth and a mild, non-abrasive cleaner.

Assembly requires the included hex keys , and your own Phillips screwdriver ,

adjustable wrench , and needlenose pliers .

Use the drawings below to identify the assembly hardware. The number in parentheses below each drawing is

the key number of the part, from the PART LIST near the end of the manual. The number after the parentheses

shows the quantity needed for assembly. Note: If a part is not in the parts bag, check to see if it is preat-

tached to one of the parts to be assembled. Extra hardware may be included. To avoid damaging plastic

parts, do not use power tools for assembly.

2. Have a second person hold the Base (52) in the

position shown.

Identify the Left Upright (53) (the Right Upright

[54] has a large hole near the lower end).

Hold the Left Upright (53) so that the two indi-

cated small holes are on top. Attach the Left

Upright to the Base (52) with two M10 x 58mm

Bolts (2). Do not tighten the Bolts yet.

Attach the Right Upright (54) to the Base (52)

in the same way.

Large

Hole

Small Holes

3. Slide the two Wheel Housings (45) onto the Base

(52). Attach each Wheel Housing with two M6 x

58mm Bolts (13), two M6 Flat Washers (32), and

two M6 Nuts (43).

45 43

4. Remove the bolts and the cardboard packaging

from both sides of the Hood (65). Discard the

bolts.

Position the Base (52) as close to the front of

the treadmill as possible.

See the inset drawing. Locate the wire tie in

the Right Upright (54). Tie the wire tie securely

to the connector on the end of the Wire Harness

(39). Next, pull the opposite end of the wire tie

out of the upper end of the Right Upright, until

the Wire Harness is routed completely through

the Right Upright. Secure the Wire Harness to

the Right Upright so that it will not fall inside.

Wire Tie

5.See the left inset drawing. Identify a Frame

Spacer (11). Hold the Frame Spacer between

the Right Upright (54) and the Frame (51). With

the help of a second person, raise the front of

the Frame until steps 5 and 6 are completed.

Attach the Right Upright (54) to the Frame (51)

with an M10 x 110mm Bolt (1), an M10 Flat

Washer (14), and an M10 Star Washer (9); do

not tighten the Bolt yet.

6. Hold the other Frame Spacer (11) between the

Left Upright (53) and the Frame (51). Attach the

Left Upright to the Frame with an M10 x 110mm

Bolt (1), an M10 Flat Washer (14), and an M10

Star Washer (9); do not tighten the Bolt yet.

14 11

7. Set the Console (91) face down on a soft sur-

face to avoid scratching it. Hold the Right

Handrail (33), which has a large hole in the loca-

tion shown, near the Console.

Next, insert the console wire into the large hole

in the side of the Right Handrail (33). Using

needlenose pliers, grasp the tie inside the Right

Handrail and pull the connector to the hole near

the bracket on the Right Handrail. Carefully

grasp the connector with the pliers and pull the

console wire out of the hole.

Console Wire Connector

Large

Hole

Bracket

Tie

8. Set the Right Handrail (33) on the Console (91).

Make sure that the console wire is not

pinched. Start a 16mm Screw (85) with an M5

Star Washer (7) into the Right Handrail, and

then start two 19mm Screws (10) into the Right

Handrail. Tighten the 16mm Screw and then

tighten the two 19mm Screws; do not over-

tighten the Screws.

Attach the Left Handrail (not shown) to the

Console (91) in the same way. Note: There is

no console wire on the left side.

Console Wire

710

10. Set the Console (91) on the Uprights (53, 54).

Make sure that no wires are pinched. Start

four M8 x 15mm Bolts (8) with four M8 Star

Washers (5) into the Uprights as shown. Do not

tighten the Bolts yet.

54 53

11. Start two M8 x 15mm Bolts (8) with two M8 Star

Washers (5) into the Uprights (53, 54). Then,

firmly tighten all six Bolts from steps 10 and

11.

With the help of a second person, carefully

lower the Uprights (53, 54) to the floor.

9. With the help of a second person, hold the

Console (91) near the Right Upright (54).

Remove the wire tie from the Wire Harness (39)

and the console wire. Connect the Wire Harness

to the console wire. See the inset drawing.

The connectors should slide together easily

and snap into place. If they do not, turn one

connector and try again. IF THE CONNEC-

TORS ARE NOT CONNECTED PROPERLY,

THE CONSOLE MAY BE DAMAGED WHEN

THE POWER IS TURNED ON. Insert the con-

nectors and the excess wire downward into the

Right Upright (54).

Console Wire

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Weslo Tretmühle Handbücher

Weslo

Weslo Cadence 2300 Bedienungsanleitung

Weslo

Weslo Easy compact 2 treadmill null

Weslo

Weslo WETL49710.0 Bedienungsanleitung

Weslo

Weslo Cadence 4.9 Ery Treadmill Bedienungsanleitung

Weslo

Weslo Cadence 10.0 Treadmill Bedienungsanleitung

Weslo

Weslo Lyne 3500 Treadmill Referenzhandbuch

Weslo

Weslo Cadence C44 Treadmill Bedienungsanleitung

Weslo

Weslo Cadence 900 Treadmill Kurzanleitung

Weslo

Weslo Crosswalk G 3.2 Treadmill Benutzerhandbuch

Weslo

Weslo Cadence Sl30 Bedienungsanleitung

Weslo

Weslo WLTL39092 Bedienungsanleitung

Weslo

Weslo Cadence 1050 Bedienungs- und Wartungshandbuch

Weslo

Weslo Cadence 78s Treadmill Bedienungsanleitung

Weslo

Weslo Cadence 890 Bedienungsanleitung

Weslo

Weslo WLTL29013 Bedienungsanleitung

Weslo

Weslo CADENCE 1005 Bedienungsanleitung

Weslo

Weslo Cadence 630 Bedienungsanleitung

Weslo

Weslo Cadence Dx5 Bedienungsanleitung

Weslo

Weslo Cadence C6 Treadmill Benutzerhandbuch

Weslo

Weslo Compact XS WETL20708.0 Bedienungsanleitung

Weslo

Weslo Cadence 200 Treadmill Systemhandbuch

Weslo

Weslo Cadence 865 Bedienungsanleitung

Weslo

Weslo Cadence M6 Elliptical Bedienungsanleitung

Weslo

Weslo CADENCE 740 Bedienungsanleitung

Beliebte Tretmühle Handbücher anderer Marken

Treadly

Treadly TREADLY 2 Bedienungsanleitung

HEALTH ONE

HEALTH ONE Walk Ro Bedienungsanleitung

NordicTrack

NordicTrack T7.5 S Bedienungsanleitung

Gold's Gym

Gold's Gym ADVANTAGE GGTL12920 Bedienungsanleitung

Merax

Merax MS282992 Bedienungsanleitung

FYTTER

FYTTER RU-2SX Bedienungsanleitung

Precor

Precor 903 Bedienungsanleitung

FitLogic

FitLogic freewill d225 Bedienungsanleitung

HOP-SPORT

HOP-SPORT ESTIMA HS-3200LB Bedienungsanleitung

Horizon Fitness

Horizon Fitness Adventure 5 Plus Bedienungsanleitung

Stamia

Stamia InMotion II Bedienungsanleitung

Smooth Fitness

Smooth Fitness EVO 3i Bedienungsanleitung

NordicTrack

NordicTrack NETL81810.0 Bedienungsanleitung

Schwinn

Schwinn 830/Journey 8.0 Bedienungsanleitung

Keys Fitness

Keys Fitness HealthTrainer HT-740T Bedienungsanleitung

Spirit

Spirit XT8 Bedienungsanleitung

NordicTrack

NordicTrack T 14.0 Treadmill Bedienungsanleitung

Master

Master F22 Bedienungsanleitung