Weslo WLTL223040 Bedienungsanleitung

Serial Number Decal

Model No. WLTL223040

Serial No.

CAUTION

Read all precautions and instruc-

tions in this manual before using

this equipment. Save this manual

for future reference.

QUESTIONS?

If you have questions, or if there

are missing parts, we will guar-

antee complete satisfaction

through direct assistance from

our factory.

TO AVOID DELAYS, PLEASE

CALL DIRECT TO OUR TOLL-

FREE CUSTOMER HOT LINE.

The trained technicians on our

Customer Hot Line will provide

immediate assistance, free of

charge to you.

CUSTOMER HOT LINE:

1-866-699-3756

Mon.–Fri., 6 a.m.–6 p.m. MST

Visit our website at

www.weslo.com

new products, prizes,

fitness tips, and much more!

USER'S MANUAL

TABLE OF CONTENTS

IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

OPERATION AND ADJUSTMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10

HOW TO FOLD AND MOVE THE TREADMILL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14

MAINTENANCE AND TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16

CONDITIONING GUIDELINES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18

ORDERING REPLACEMENT PARTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Back Cover

Note: An EXPLODED DRAWING and a PART LIST are attached in the center of this manual.

WESLO is a registered trademark of ICON IP, Inc.

1. It is the responsibility of the owner to ensure

that all users of this treadmill are adequately

informed of all warnings and precautions.

2. Use the treadmill only as described in this

manual.

3. Place the treadmill on a level surface, with at

least eight feet of clearance behind it and two

feet on each side. Do not place the treadmill

on any surface that blocks air openings. To

protect the floor or carpet from damage, place

a mat under the treadmill.

4. Keep the treadmill indoors, away from mois-

ture and dust. Do not put the treadmill in a

garage or covered patio, or near water.

5. Do not operate the treadmill where aerosol

products are used or where oxygen is being

administered.

6. Inspect and properly tighten all parts of the

treadmill regularly.

7. Keep children under the age of 12 and pets

away from the treadmill at all times.

8. The treadmill should not be used by persons

weighing more than 250 pounds.

9. Never allow more than one person on the

treadmill at a time.

10. Wear appropriate exercise clothes when using

the treadmill. Do not wear loose clothes that

could become caught in the treadmill. Athletic

support clothes are recommended for both

men and women. Always wear athletic shoes.

Never use the treadmill with bare feet, wearing

only stockings, or in sandals.

11. When connecting the power cord (see page

10), plug the power cord into a surge sup-

pressor (not included) and plug the surge

suppressor into a grounded circuit capable of

carrying 15 or more amps. No other appliance

should be on the same circuit. Do not use an

extension cord.

12. Use only a single-outlet surge suppressor that

meets all of the specifications described on

page 10. To purchase a surge suppressor, see

your local WESLO dealer or call 1-866-699-

3756 and order part number 146148, or see

your local electronics store.

13. Failure to use a properly functioning surge

suppressor could result in damage to the con-

trol system of the treadmill. If the control sys-

tem is damaged, the walking belt may change

speed, accelerate, or stop unexpectedly,

which may result in a fall and serious injury.

14. Keep the power cord and the surge suppres-

sor away from heated surfaces.

15. Never move the walking belt while the power

is turned off. Do not operate the treadmill if

the power cord or plug is damaged, or if the

treadmill is not working properly. (See page 5

if the treadmill is not working properly.)

16. Never start the treadmill while you are stand-

ing on the walking belt. Always hold the

handrails while using the treadmill.

17. The treadmill is capable of high speeds.

Adjust the speed in small increments to avoid

sudden jumps in speed.

18. Never leave the treadmill unattended while it is

running. Always remove the key and unplug

the power cord when the treadmill is not in use.

19. Do not attempt to raise, lower, or move the

treadmill until it is properly assembled. (See

ASSEMBLY on page 6, and HOW TO MOVE

THE TREADMILL on page 13.) You must be

able to safely lift 45 pounds (20 kg) to raise,

lower, or move the treadmill.

20. Do not change the incline of the treadmill by

placing objects under the treadmill.

21. Use the hand weights only at walking speeds.

Using weights and not holding the handrails

may compromise your ability to maintain your

balance. Exercises using weights should be

attempted only by experienced users.

WARNING: To reduce the risk of burns, fire, electric shock, or injury to persons, read the

following important precautions and information before operating the treadmill.

IMPORTANT PRECAUTIONS

22. When folding or moving the treadmill, make

sure that the storage latch is fully closed.

23. Never drop or insert any object into any

opening.

24. DANGER: Always unplug the power

cord immediately after use, before cleaning

the treadmill, and before performing the main-

tenance and adjustment procedures de-

scribed in this manual. Never remove the

motor hood unless instructed to do so by an

authorized service representative. Servicing

other than the procedures in this manual

should be performed by an authorized service

representative only.

25. This treadmill is intended for in-home use

only. Do not use this treadmill in any commer-

cial, rental, or institutional setting.

WARNING: Before beginning this or any exercise program, consult your physician. This

is especially important for persons over the age of 35 or persons with pre-existing health problems.

Read all instructions before using. ICON assumes no responsibility for personal injury or property

damage sustained by or through the use of this product.

SAVE THESE INSTRUCTIONS

The decals shown have been placed on your

treadmill. If a decal is missing, or if it is not legi-

ble, please call our Customer Service

Department, toll-free, to order a free replacement

decal (see ORDERING REPLACEMENT PARTS on

the back cover of this manual). Apply the decal in

the location shown. Note: The decals are not

shown at actual size.

Thank you for selecting the WESLO CADENCE®A3

treadmill. The CADENCE A3 treadmill combines ad-

vanced technology with innovative design to let you

enjoy an excellent form of cardiovascular exercise in

the convenience and privacy of your home. And when

you’re not exercising, the innovative CADENCE A3

treadmill can be folded up, requiring less than half the

floor space of other treadmills.

For your benefit, read this manual carefully before

using the treadmill. If you have questions after read-

ing this manual, please call our Customer Service

Department toll-free at 1-866-699-3756, Monday

through Friday, 6 a.m. until 6 p.m. Mountain Time (ex-

cluding holidays). To help us assist you, please note

the product model number and serial number before

calling. The model number of the treadmill is

WLTL223040. The serial number can be found on a

decal attached to the treadmill (see the front cover of

this manual for the location).

Before reading further, please review the drawing

below and familiarize yourself with the labeled parts.

BEFORE YOU BEGIN

Handrail

Hand Weight

Console

Key/Clip

Accessory Tray

Circuit Breaker

Incline Leg

Walking Belt

Wheel

Power Cord

Foot Pad

Rear Roller

Adjustment Bolts

Water Bottle

Holder (Bottle

not included)

Storage Latch

RIGHT SIDE

LEFT SIDE

1. Make sure that the power cord is unplugged.

Orient the Base (28) so the holes for the four Base Pads

(19) are on top. Open part bag A. Attach the four Base

Pads to the Base with the four 3/4” Tek Screws (24).

Attach the two Wheels (15) to the Base (28) with two 2”

Bolts (12) and two Wheel Nuts (29) as shown. Do not

overtighten the Bolts. The Wheels must be able to

turn freely.

ASSEMBLY

Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials. Do not

dispose of the packing materials until assembly is completed. Note: The underside of the treadmill walking belt is

coated with high-performance lubricant. During shipping, a small amount of lubricant may be transferred to the top of

the walking belt or the shipping carton. This is a normal condition and does not affect treadmill performance. If there

is lubricant on top of the walking belt, simply wipe off the lubricant with a soft cloth and a mild, non-abrasive cleaner.

Assembly requires the included allen wrench and your own phillips screwdriver ,

adjustable wrench , wire cutters , and needlenose pliers .

For help identifying the assembly hardware, see the part drawings below. Note: The assembly hardware

and other small parts are packaged in separate part bags. Do not open the part bags until instructed to

do so.

5/16” Star Washer

(64)–4

3/8" Star

Washer (42)–6

6 1/2" Bolt (10)–2

3/4" Tek Screw (24)–4

2" Bolt (12)–6

Wheel Nut (29)–2

3/4" Screw (7)–10

Rack Screw (21)–12

3” Bolt (30)–4

3. Raise the Uprights (6, 17) to the vertical position. Place

the Frame (55) between the Uprights as shown.

Feed the Wire Harness (22) into the large round hole in

the lower end of the Right Upright (6) and out of the indi-

cated hole. Note: It may be helpful to use needlenose pli-

ers to pull the end of the Wire Harness out of the hole.

4. Hold the Right Frame Spacer (16) and the Left Frame

Spacer (not shown) against the sides of the Frame (55) as

shown. Make sure that the widest side of each Frame

Spacer is facing forward. With the help of a second per-

son, carefully lift and hold the Frame so the Frame

Spacers are between the Right Upright (6) and the Left

Upright (not shown).

Align the hole in the Right Upright (6) with the hole in the

Right Frame Spacer (16). Tighten a 6 1/2” Bolt (10) with a

3/8” Star Washer (42) into the Right Upright, the Right

Frame Spacer, and the Frame (55). Repeat this step on

the left side of the treadmill. Do not overtighten the

Bolts.

Wide

side

Large

Hole

Small

Holes

Small

Holes

6, 17

Hole

22a

6, 17

2. Identify the Right Upright (6), which has a large round

hole near the lower end, and the Left Upright (17).

See drawing 2a. Make sure that there are two U-nuts

(63) in the lower end of each Upright (6, 17).

Open part bag B. See drawing 2b. Have a second per-

son hold the Base (28) so it is resting on the Wheels (15)

as shown. Attach the Right and Left Uprights (6, 17) to

the Base with four 3” Bolts (30) and four 5/16” Star

Washers (64). Do not tighten the Bolts yet. Make sure

that the large and small holes in the Right Upright

are on the sides shown, and that the small holes in

the Left Upright are on the indicated side. In addition,

make sure that the Base is oriented so the Base Pads

(19) are in the location shown.

5. Hold a Handrail (32) near the Right Upright (6). Feed the

Wire Harness (22) into the hole near the lower end of the

Handrail and out the hole near the upper end of the

Handrail. Note: It may be helpful to use needlenose pliers

to pull the end of the Wire Harness out of the hole.

6. Open part bag C. Hold the Handrail (32) with the Wire

Harness (22) against the Right Upright (6). Hand tighten

two 2” Bolts (12) with two 3/8” Star Washers (42) into the

Handrail and the Right Upright. Be careful not to pinch

the Wire Harness. Do not tighten the Bolts yet.

Attach the other Handrail (not shown) to the Left Upright

(17) as described above. Note: There is not a wire on the

left side. Do not tighten the Bolts yet.

Orient a Weight Rack (71) as shown, and attach it to the

Right Upright (6) with six Rack Screws (21). Start all six

Screws before tightening them; do not overtighten

the Screws.

Attach the other Weight Rack (not shown) to the Left

Upright (17) as described above.

22 71

7. Hold the Console Base (77) near the Handrails (32) (only

one is shown). Insert the Wire Harness (22) through the

looped plastic tie and through the hole in the Console

Base. Remove the tape holding the ends of the wires.

Tie

Tape

Knob

Spring

Collar

10.Press the Latch Housing (58) into the Left Upright (17).

Remove the knob from the pin. Make sure that the collar

and the spring are on the pin as shown. Insert the pin

into the Latch Housing, and tighten the knob back onto

the pin.

See step 2. Lower the Uprights (6, 17). Tighten the four

3” Bolts (30). Raise the Uprights to the vertical position.

See step 6. Tighten the four 2” Bolts (12). Set a 3-lb.

Weight (not shown) on the bottom hanger on the Weight

Rack (15), a 2-lb. Weight on the middle hanger, and a

1-lb. Weight on the top hanger.

11.Make sure that all parts are properly tightened before you use the treadmill. Note: Extra hardware may

be included. Keep the included allen wrenches in a secure place. The allen wrench is used to adjust the walk-

ing belt (see page 17). To protect the floor or carpet, place a mat under the treadmill.

8. Hold the Console (1) near the Console Base (77). Touch

the right Handrail (32) to discharge any static.

Locate the two wires in the Wire Harness (22) that have

L-shaped connectors on the ends. Press the connectors

onto the two tabs on the switch shown in inset drawing 8a.

Connect the other two wires in the Wire Harness (22) to

the back of the Console (1) in the locations shown by the

arrows in drawing 8. The connectors should slide eas-

ily into the sockets and snap into place (see drawings

8b and 8c). If the connectors do not slide easily and snap

into place, turn the connectors and then insert them. IF

THE CONNECTORS ARE NOT INSERTED PROPERLY,

THE CONSOLE MAY BE DAMAGED WHEN THE

POWER IS TURNED ON.

9. Securely tighten a plastic tie around the Wire Harness (22)

and under the indicated hook on the Console (1) to pre-

vent the Wire Harness from slipping. Tighten the plastic tie

and cut off the end.

See drawing 9a. Set the Console (1) in the Console Base

(77). Make sure that the Wire Harness (not shown) is

not pinched. Next, set the Console Base on the

Handrails (32). Insert as much of the Wire Harness as

possible into the hole in the right Handrail (32). See step

7. Tighten the plastic tie and cut off the end.

Loosely thread six 3/4” Screws (7) into the Console Base

(77) and the Console (1). Loosely thread four 3/4” Screws

into the Handrails (only two Screws are shown). Start all

ten Screws and then tighten them; do not overtighten

the Screws.

Tie

Hook

77 1

32 32

8a 8b 8c

OPERATION AND ADJUSTMENT

THE PRE-LUBRICATED WALKING BELT

Your treadmill features a walking belt coated with high-

performance lubricant. IMPORTANT: Never apply sil-

icone spray or other substances to the walking

belt or the walking platform. Such substances will

deteriorate the walking belt and cause excessive

wear.

HOW TO PLUG IN THE POWER CORD

Your treadmill, like any other type of sophisticated

electronic equipment, can be seriously damaged by

sudden voltage changes in your home’s power.

Voltage surges, spikes, and noise interference can

result from weather conditions or from other appli-

ances being turned on or off. To decrease the possi-

bility of your treadmill being damaged, always

use a surge suppressor with your treadmill (see

drawing 1 at the right). To purchase a surge sup-

pressor, see your local WESLO dealer or call 1-866-

699-3756 and order part number 146148, or see

your local electronics store.

Use only a single-outlet surge suppressor that is

UL 1449 listed as a transient voltage surge sup-

pressor (TVSS). The surge suppressor must have a

UL suppressed voltage rating of 400 volts or less

and a minimum surge dissipation of 450 joules.

The surge suppressor must be electrically rated for

120 volts AC and 15 amps. There must be a moni-

toring light on the surge suppressor to indicate

whether it is functioning properly. Failure to use a

properly functioning surge suppressor could result

in damage to the control system of the treadmill. If

the control system is damaged, the walking belt

may change speed, accelerate or stop unexpect-

edly, which may result in a fall and serious injury.

This product must be grounded. If it should malfunc-

tion or break down, grounding provides a path of least

resistance for electric current to reduce the risk of elec-

tric shock. This product is equipped with a cord having

an equipment-grounding conductor and a grounding

plug. Plug the power cord into a surge suppressor,

and plug the surge suppressor into an appropriate

outlet that is properly installed and grounded in

accordance with all local codes and ordinances.

Important: The treadmill is not compatible with

GFCI-equipped outlets.

This product is for use on a nominal 120-volt circuit,

and has a grounding plug that looks like the plug illus-

trated in drawing 1 below. A temporary adapter that

looks like the adapter illustrated in drawing 2 may be

used to connect the surge suppressor to a 2-pole

receptacle as shown in drawing 2 if a properly

grounded outlet is not available.

The temporary adapter should be used only until a

properly grounded outlet (drawing 1) can be installed

by a qualified electrician.

The green-colored rigid ear, lug, or the like extending

from the adapter must be connected to a permanent

ground such as a properly grounded outlet box cover.

Whenever the adapter is used it must be held in place

by a metal screw. Some 2-pole receptacle outlet box

covers are not grounded. Contact a qualified elec-

trician to determine if the outlet box cover is

grounded before using an adapter.

DANGER: Improper connection

of the equipment-grounding conductor can

result in an increased risk of electric shock.

Check with a qualified electrician or service-

man if you are in doubt as to whether the

product is properly grounded. Do not modify

the plug provided with the product—if it will

not fit the outlet, have a proper outlet

installed by a qualified electrician.

Grounded Outlet Box

Grounding Plug

Surge Suppressor

Grounding Pin

Adapter

Lug

Metal Screw

Grounded Outlet

Grounding Pin

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Weslo Tretmühle Handbücher

Weslo

Weslo Cadence S5 Treadmill Benutzerhandbuch

Weslo

Weslo Cadence 915 Benutzerhandbuch

Weslo

Weslo Cadence 55 Bedienungsanleitung

Weslo

Weslo CADENCE 340 CS Bedienungsanleitung

Weslo

Weslo Cadence4.8 Treadmill Bedienungsanleitung

Weslo

Weslo CADENCE 55 WETL13606.0 Bedienungsanleitung

Weslo

Weslo Cardiostride 3.0 Treadmill Benutzerhandbuch

Weslo

Weslo Cadence 900 Treadmill Kurzanleitung

Weslo

Weslo WLTL21191 Bedienungsanleitung

Weslo

Weslo Cadence J3.7 Treadmill Bedienungsanleitung

Weslo

Weslo Cadence 70 Treadmill Bedienungsanleitung

Weslo

Weslo WLTL29320 Bedienungsanleitung

Weslo

Weslo Cadence Ex 18 Bedienungsanleitung

Weslo

Weslo Cadence 1020 Treadmill Bedienungsanleitung

Weslo

Weslo Cadence 45 Treadmill Bedienungsanleitung

Weslo

Weslo Cadence 985 Bedienungsanleitung

Weslo

Weslo Cardio Stride 2.0 Treadmill Bedienungsanleitung

Weslo

Weslo Cadence G-40 Treadmill Bedienungsanleitung

Weslo

Weslo Pro Crosswalk 7.8 Treadmill Bedienungsanleitung

Weslo

Weslo Cadence Ex 18 Bedienungsanleitung

Weslo

Weslo WLTL26080 Bedienungsanleitung

Weslo

Weslo Crosswalk 5.0t Bedienungsanleitung

Weslo

Weslo Cadence Dl15 Bedienungsanleitung

Weslo

Weslo Sport 350 Treadmill Bedienungsanleitung

Beliebte Tretmühle Handbücher anderer Marken

Treadly

Treadly TREADLY 2 Bedienungsanleitung

HEALTH ONE

HEALTH ONE Walk Ro Bedienungsanleitung

NordicTrack

NordicTrack T7.5 S Bedienungsanleitung

Gold's Gym

Gold's Gym ADVANTAGE GGTL12920 Bedienungsanleitung

Merax

Merax MS282992 Bedienungsanleitung

FYTTER

FYTTER RU-2SX Bedienungsanleitung

Precor

Precor 903 Bedienungsanleitung

FitLogic

FitLogic freewill d225 Bedienungsanleitung

HOP-SPORT

HOP-SPORT ESTIMA HS-3200LB Bedienungsanleitung

Horizon Fitness

Horizon Fitness Adventure 5 Plus Bedienungsanleitung

Stamia

Stamia InMotion II Bedienungsanleitung

Smooth Fitness

Smooth Fitness EVO 3i Bedienungsanleitung

NordicTrack

NordicTrack NETL81810.0 Bedienungsanleitung

Schwinn

Schwinn 830/Journey 8.0 Bedienungsanleitung

Keys Fitness

Keys Fitness HealthTrainer HT-740T Bedienungsanleitung

Spirit

Spirit XT8 Bedienungsanleitung

NordicTrack

NordicTrack T 14.0 Treadmill Bedienungsanleitung

Master

Master F22 Bedienungsanleitung