Weslo WLTL29606.9 Bedienungsanleitung

USER'S MANUAL

Model No. WLTL29606.9

Serial No.

Write the serial number in the space

above for future reference.

CAUTION

Read all precautions and instruc-

tions in this manual before using

this equipment. Save this manual

for future reference.

QUESTIONS?

f you have questions, or if parts are

damaged or missing, DO NOT

CONTACT THE STORE; please

contact Customer Care.

IMPORTANT: Please register this

product (see the limited warranty

on the back cover of this manual)

before contacting Customer Care.

CALL TOLL-FREE:

1-866-699-3756

Mon.–Fri. 6 a.m.–6 p.m. MT

Sat. 8 a.m.–4 p.m. MT

ON THE WEB:

www.wesloservice.com

Serial Number

Decal

www.weslo.com

Meijer.com

TABLE OF CONTENTS

WARNNGDECALPLACEMENT ..............................................................2

MPORTANTPRECAUTONS .................................................................3

BEFOREYOUBEGN .......................................................................5

ASSEMBLY ...............................................................................6

OPERATONANDADJUSTMENT ............................................................12

HOWTOFOLDANDMOVETHETREADMLL ..................................................17

TROUBLESHOOTNG ......................................................................19

EXERCSEGUDELNES ...................................................................21

PARTLST ...............................................................................22

EXPLODEDDRAWNG .....................................................................24

ORDERNGREPLACEMENTPARTS ..................................................BackCover

LMTEDWARRANTY...............................................................BackCover

WESLO is a registered trademark of CON P, nc.

This drawing shows the location(s) of the

warning decal(s). If a decal is missing or il-

legible, call the telephone number on the

front cover of this manual and request a

free replacement decal. Apply the decal in

the location shown. Note: The decal(s) may

not be shown at actual size.

WARNING DECAL PLACEMENT

Meijer.com

WARNING: To reduce the risk of serious injury, read all important precautions and in-

structions in this manual and all warnings on your treadmill before using your treadmill. ICON as-

sumes no responsibility for personal injury or property damage sustained by or through the use of

this product.

IMPORTANT PRECAUTIONS

1. Before beginning this or any exercise pro-

gram, consult your physician. This is espe-

cially important for persons over age 35 or

persons with pre-existing health problems.

2. It is the responsibility of the owner to ensure

that all users of this treadmill are adequately

informed of all warnings and precautions.

3. Use the treadmill only as described.

4. Place the treadmill on a level surface, with at

least 8 ft. (2.4 m) of clearance behind it and 2

ft. (0.6 m) on each side. Do not place the

treadmill on any surface that blocks air open-

ings. To protect the floor or carpet from dam-

age, place a mat under the treadmill.

5. Keep the treadmill indoors, away from mois-

ture and dust. Do not put the treadmill in a

garage or covered patio, or near water.

6. Do not operate the treadmill where aerosol

products are used or where oxygen is being

administered.

7. Keep children under age 12 and pets away

from the treadmill at all times.

8. The treadmill should not be used by persons

weighing more than 250 lbs. (113 kg).

9. Never allow more than one person on the

treadmill at a time.

10. Wear appropriate exercise clothes when

using the treadmill. Do not wear loose clothes

that could become caught in the treadmill.

Athletic support clothes are recommended for

both men and women. Always wear athletic

shoes; never use the treadmill with bare feet,

wearing only stockings, or in sandals.

11. When connecting the power cord (see page 12),

plug the power cord into a surge suppressor

(not included) and plug the surge suppressor

into a grounded circuit capable of carrying 15

or more amps. No other appliance should be on

the same circuit. Do not use an extension cord.

12. Use only a single-outlet surge suppressor that

meets all of the specifications described on

page 12. To purchase a surge suppressor, see

your local WESLO dealer or call the telephone

number on the front cover of this manual and

order part number 146148, or see your local

electronics store.

13. Failure to use a properly functioning surge

suppressor could result in damage to the con-

trol system of the treadmill. If the control sys-

tem is damaged, the walking belt may slow,

accelerate, or stop unexpectedly, which may

result in a fall and serious injury.

14. Keep the power cord and the surge suppres-

sor away from heated surfaces.

15. Never move the walking belt while the power

is turned off. Do not operate the treadmill if

the power cord or plug is damaged, or if the

treadmill is not working properly. (See TROU-

BLESHOOTING on page 19 if the treadmill is

not working properly.)

16. Read, understand, and test the emergency

stop procedure before using the treadmill (see

HOW TO TURN ON THE POWER on page 13).

17. Never start the treadmill while you are stand-

ing on the walking belt. Always hold the

handrails while using the treadmill.

18. The pulse sensor is not a medical device.

Various factors, including your movement,

may affect the accuracy of heart rate readings.

The pulse sensor is intended only as an exer-

cise aid in determining heart rate trends in

general.

19. The treadmill is capable of high speeds.

Adjust the speed in small increments to avoid

sudden jumps in speed.

Meijer.com

20. Never leave the treadmill unattended while it

is running. Always remove the key, unplug

the power cord, and switch the reset/off cir-

cuit breaker to the off position when the

treadmill is not in use. (See the drawing on

page 5 for the location of the circuit breaker.)

21. Do not attempt to raise, lower, or move the

treadmill until it is properly assembled. (See

ASSEMBLY on page 6 and HOW TO FOLD

AND MOVE THE TREADMILL on page 17.)

You must be able to safely lift 45 lbs. (20 kg)

to raise, lower, or move the treadmill.

22. When folding or moving the treadmill, make

sure that the storage latch is holding the

frame securely in the storage position.

23. Do not change the incline of the treadmill by

placing objects under the treadmill.

24. Inspect and properly tighten all parts of the

treadmill regularly.

25. Never drop or insert any object into any

opening on the treadmill.

26. DANGER: Always unplug the power

cord immediately after use, before cleaning

the treadmill, and before performing the main-

tenance and adjustment procedures de-

scribed in this manual. Never remove the

motor hood unless instructed to do so by an

authorized service representative. Servicing

other than the procedures in this manual

should be performed by an authorized service

representative only.

27. This treadmill is intended for in-home use

only. Do not use this treadmill in any commer-

cial, rental, or institutional setting.

28. Over exercising may result in serious injury

or death. If you feel faint or if you experience

pain while exercising, stop immediately and

cool down.

SAVE THESE INSTRUCTIONS

Meijer.com

Thank you for selecting the new WESLO®CADENCE

G-40 treadmill. The CADENCE G-40 treadmill offers a

selection of features designed to make your workouts

at home more effective. And when youʼre not exercis-

ing, the unique treadmill can be folded up, requiring

less than half the floor space of other treadmills.

For your benefit, read this manual carefully before

using the treadmill. f you have questions after read-

ing this manual, please see the front cover of this man-

ual. To help us assist you, note the product model

number and serial number before contacting us. The

model number and the location of the serial number

decal are shown on the front cover of this manual.

Before reading further, please review the drawing

below and familiarize yourself with the labeled parts.

BEFORE YOU BEGIN

Handrail

Storage Latch

Console

Key/Clip

Reset/Off

Circuit Breaker

Power Cord

Walking Belt

Hood

Wheel

Foot Rail

Rear Roller

Adjustment Bolts

Accessory Tray

Platform Cushion

Meijer.com

1. Make sure that the power cord is unplugged.

Place a piece of cardboard under the tread-

mill frame to protect the floor during assem-

bly.

Have a second person hold the Base (52) in the

position shown.

Attach six Base Pads (63) to the Base (52) with

six 19mm Tek Screws (26).

26 63

M10 Flat

Washer (14)–2

M8 x 15mm

Bolt (8)–6

M10 Star

Washer (9)–2

M8 Star

Washer (5)–6

M10 x 58mm Bolt (2)–4

M10 x 110mm Bolt (1)–2

16mm Screw

(85)–2

M5 Star

Washer (7)–2

M8 Nut (46)–2

19mm Screw (10)–4

M8 Flat

Washer (72)–4

#10 x 1" Screw

(58)–2

19mm Tek

Screw (26)–6

M6 Flat

Washer (32)–4

M6 Nut (43)–4

M6 x 58mm Bolt (13)–4

M8 x 52mm Bolt (82)–2

ASSEMBLY

To hire an authorized service technician to assemble the treadmill, call toll-free 1-800-445-2480. Assembly

requires two persons. Set the treadmill in a cleared area and remove all packing materials; do not dispose of

the packing materials until assembly is completed. Note: The underside of the treadmill walking belt is coated

with high-performance lubricant. During shipping, some lubricant may be transferred to the top of the walking belt

or the shipping carton. This does not affect treadmill performance. f there is lubricant on top of the walking belt,

simply wipe off the lubricant with a soft cloth and a mild, non-abrasive cleaner.

Assembly requires the included hex keys and your own Phillips screwdriver , adjustable

wrench , and needlenose pliers .

Use the drawings below to identify the assembly hardware. The number in parentheses below each drawing is

the key number of the part, from the PART L ST near the end of this manual. The number after the parentheses

is the quantity needed for assembly. Note: Some parts may be preattached. To avoid damaging parts, do

not use power tools for assembly. Extra hardware may be included.

Meijer.com

2. Have a second person hold the Base (52) in the

position shown.

dentify the Right Upright (54), which has a large

hole near the lower end.

Hold the Right Upright (54) so that the large

hole is oriented as shown. Attach the Right

Upright to the Base (52) with two M10 x

R0710Amm Bolts (2). Do not tighten the Bolts

yet.

Attach the Left Upright (53) to the Base (52)

in the same way.

Large

Hole

Small Holes

3. Slide the two Wheel Housings (45) onto the

Base (52). Attach each Wheel Housing with two

M6 x R0710Amm Bolts (13), two M6 Flat

Washers (32), and two M6 Nuts (43).

45 43

4. Remove and discard the bolts and the card-

board packaging from both sides of the Hood

(65).

Position the Base (52) as close to the front of

the treadmill as possible.

See the inset drawing. Locate the wire tie in

the Right Upright (54). Tie the wire tie securely

to the connector on the end of the Wire Harness

(39). Next, pull the opposite end of the wire tie

out of the upper end of the Right Upright, until

the Wire Harness is routed completely through

the Right Upright. Secure the Wire Harness to

the upper end of the Right Upright so that it will

not fall inside.

65 54

Wire Tie

Meijer.com

5. See the left inset drawing and identify a Frame

Spacer (11). Hold the Frame Spacer between

the Right Upright (54) and the Frame (51).

Attach the Right Upright to the Frame with an

M10 x 110mm Bolt (1), an M10 Flat Washer

(14), and an M10 Star Washer (9); do not

tighten the Bolt yet.

6. Hold the other Frame Spacer (11) between the

Left Upright (53) and the Frame (51). Attach the

Left Upright to the Frame with an M10 x 110mm

Bolt (1), an M10 Flat Washer (14), and an M10

Star Washer (9); do not tighten the Bolt yet.

Meijer.com

7. Set the Console (91) face down on a soft sur-

face to avoid scratching it. dentify the Right

Handrail (33), which has a large hole in the loca-

tion shown. Hold the Right Handrail near the

Console.

Next, insert the console wire into the large hole

in the side of the Right Handrail (33). Using

needlenose pliers, carefully grasp the connector

and pull the console wire out of the hole near

the bracket on the Right Handrail.

Console Wire Connector

Wire Tie

Large

Hole

Bracket

8. Set the Right Handrail (33) on the Console (91).

Make sure that the console wire is not

pinched. Start a 16mm Screw (85) with an M5

Star Washer (7) into the Right Handrail, and

then start two 19mm Screws (10) into the Right

Handrail. Tighten the 16mm Screw and then

tighten the two 19mm Screws; do not over-

tighten the Screws.

Attach the Left Handrail (not shown) to the

Console (91) in the same way. Note: There is

no wire on the left side.

Console Wire 85

710

Wire Tie

Meijer.com

10. Set the Console (91) on the Uprights (53, 54).

Make sure that no wires are pinched. Start

four M8 x 15mm Bolts (8) with four M8 Star

Washers (5) into the Uprights as shown. Do not

tighten the Bolts yet.

54 53

11. Start an M8 x 15mm Bolt (8) with an M8 Star

Washer (5) into each Upright (53, 54). Then,

firmly tighten all six M8 x 15mm Bolts (8).

With the help of a second person, carefully

lower the Uprights (53, 54) to the floor.

9. With the help of a second person, hold the

Console (91) near the Right Upright (54).

Connect the Wire Harness (39) to the console

wire. See the inset drawing. The connectors

should slide together easily and snap into

place. f they do not, turn one connector and try

again. IF THE CONNECTORS ARE NOT CON-

NECTED PROPERLY, THE CONSOLE MAY

BE DAMAGED WHEN THE POWER IS

TURNED ON. Remove the wire tie from the

Wire Harness. nsert the connectors and the ex-

cess wire downward into the Right Upright (54).

Console Wire

Console

Wire

Meijer.com

Dieses Handbuch passt für folgende Modelle

Andere Weslo Tretmühle Handbücher

Weslo

Weslo Cadence 6.0 Treadmill Bedienungs- und Wartungshandbuch

Weslo

Weslo Cadence Ts5 Bedienungsanleitung

Weslo

Weslo Cadence 700 Treadmill Kurzanleitung

Weslo

Weslo WLTL37309.0 Bedienungsanleitung

Weslo

Weslo Cadence 21.5 Treadmill Konfigurationshandbuch

Weslo

Weslo Cadence 45 Treadmill Bedienungsanleitung

Weslo

Weslo Cadence 6.0 Treadmill Bedienungsanleitung

Weslo

Weslo Sport 100 Treadmill Benutzerhandbuch

Weslo

Weslo Cadence 3260 Bedienungsanleitung

Weslo

Weslo Cadence 10.0 P.i. Bedienungsanleitung

Weslo

Weslo Cadence 55 Bedienungsanleitung

Weslo

Weslo WLTL29508.0 Bedienungsanleitung

Weslo

Weslo Cadence R 7.2 Treadmill Bedienungsanleitung

Weslo

Weslo Crosswalk 365e Treadmill Bedienungsanleitung

Weslo

Weslo 925925 Bedienungsanleitung

Weslo

Weslo CADENCE G 3.9 Bedienungsanleitung

Weslo

Weslo Cadence 800 Treadmill Kurzanleitung

Weslo

Weslo Cadence Dx5 Bedienungsanleitung

Weslo

Weslo Cadence Dx15 Bedienungsanleitung

Weslo

Weslo Cadence 600 Treadmill Bedienungs- und Wartungshandbuch

Weslo

Weslo Cadence 45 Treadmill Bedienungsanleitung

Weslo

Weslo Cadence 900 Treadmill Bedienungs- und Wartungshandbuch

Weslo

Weslo WLTL22191 Bedienungsanleitung

Weslo

Weslo WETL11140 Bedienungsanleitung

Beliebte Tretmühle Handbücher anderer Marken

Treadly

Treadly TREADLY 2 Bedienungsanleitung

HEALTH ONE

HEALTH ONE Walk Ro Bedienungsanleitung

NordicTrack

NordicTrack T7.5 S Bedienungsanleitung

Gold's Gym

Gold's Gym ADVANTAGE GGTL12920 Bedienungsanleitung

Merax

Merax MS282992 Bedienungsanleitung

FYTTER

FYTTER RU-2SX Bedienungsanleitung

Precor

Precor 903 Bedienungsanleitung

FitLogic

FitLogic freewill d225 Bedienungsanleitung

HOP-SPORT

HOP-SPORT ESTIMA HS-3200LB Bedienungsanleitung

Horizon Fitness

Horizon Fitness Adventure 5 Plus Bedienungsanleitung

Stamia

Stamia InMotion II Bedienungsanleitung

Smooth Fitness

Smooth Fitness EVO 3i Bedienungsanleitung

NordicTrack

NordicTrack NETL81810.0 Bedienungsanleitung

Schwinn

Schwinn 830/Journey 8.0 Bedienungsanleitung

Keys Fitness

Keys Fitness HealthTrainer HT-740T Bedienungsanleitung

Spirit

Spirit XT8 Bedienungsanleitung

NordicTrack

NordicTrack T 14.0 Treadmill Bedienungsanleitung

Master

Master F22 Bedienungsanleitung