Weslo WETL11140 Bedienungsanleitung

USER’S MANUAL

Serial Number Decal

Model No. WETL11140

Serial No.

QUESTIONS?

As a manufacturer, we are com-

mitted to providing complete

customer satisfaction. If you

have questions, or if there are

missing or damaged parts,

please call:

Or write:

ICON Health & Fitness, Ltd.

Unit 4

Revie Road Industrial Estate

Revie Road, Beeston

Leeds, LS11 8JG

[email protected]

CAUTION

Read all precautions and instruc-

tions in this manual before using

this equipment. Save this manual

for future reference.

www.iconeurope.com

Visit our website at

08457 089 009

Class H Fitness Product

TABLE OF CONTENTS

IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

OPERATION AND ADJUSTMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11

HOW TO FOLD AND MOVE THE TREADMILL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14

MAINTENANCE AND TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16

CONDITIONING GUIDELINES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18

PART LIST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22

EXPLODED DRAWING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23

ORDERING REPLACEMENT PARTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Back Cover

WESLO is a registered trademark of ICON IP, Inc.

1. It is the responsibility of the owner to ensure

that all users of this treadmill are adequately

informed of all warnings and precautions.

2. Use the treadmill only as described in this

manual.

3. Place the treadmill on a level surface, with at

least 2.5 m (8 ft.) of clearance behind it and

0.5 m (2 ft.) on each side. Do not place the

treadmill on any surface that blocks air open-

ings. To protect the floor or carpet from dam-

age, place a mat under the treadmill.

4. Keep the treadmill indoors, away from mois-

ture and dust. Do not put the treadmill in a

garage or covered patio, or near water.

5. Do not operate the treadmill where aerosol

products are used or where oxygen is being

administered.

6. Keep children under the age of 12 and pets

away from the treadmill at all times.

7. The treadmill should not be used by persons

weighing more than 115 kg (250 lbs.).

8. Never allow more than one person on the

treadmill at a time.

9. Wear appropriate exercise clothes when

using the treadmill. Do not wear loose clothes

that could become caught in the treadmill.

Athletic support clothes are recommended for

both men and women.

Always wear athletic

shoes. Never use the treadmill with bare feet,

wearing only stockings, or in sandals.

10. When connecting the power cord (see page

11), plug the power cord into an earthed cir-

cuit. No other appliance should be on the

same circuit. When replacing the fuse, an

ASTA approved BS1362 type should be fitted

to the fuse carrier. A 13 amp fuse should be

used.

11. If an extension cord is needed, use only a 3-

conductor, 1mm2(14-gauge) cord that is no

longer than 1.5 m (5 ft.).

12. Keep the power cord away from heated sur-

faces.

13. Never move the walking belt whilst the power

is turned off. Do not operate the treadmill if

the power cord or plug is damaged, or if the

treadmill is not working properly. (See

BEFORE YOU BEGIN on page 5 if the tread-

mill is not working properly.)

14. Never start the treadmill whilst you are stand-

ing on the walking belt. Always hold the

handrails whilst using the treadmill.

15. The treadmill is capable of high speeds.

Adjust the speed in small increments to avoid

sudden jumps in speed.

16. Never leave the treadmill unattended while it

is running. Always remove the key, unplug

the power cord, and move the on/off switch to

the off position when the treadmill is not in

use. (See the drawing on page 5 for the loca-

tion of the on/off switch.)

17. Do not attempt to raise, lower, or move the

treadmill until it is properly assembled. (See

ASSEMBLY on page 6 and HOW TO FOLD

AND MOVE THE TREADMILL on page 14.)

You must be able to safely lift 20 kg (45 lbs.)

to raise, lower, or move the treadmill.

18. When folding or moving the treadmill, make

sure that the storage latch is fully closed.

19. Do not change the incline of the treadmill by

placing objects under the treadmill.

20. Inspect and properly tighten all parts of the

treadmill regularly.

21. Never drop or insert any object into any

opening.

WARNING: To reduce the risk of burns, fire, electric shock, or injury to persons, read the

following important precautions and information before operating the treadmill.

IMPORTANT PRECAUTIONS

22. DANGER: Always unplug the power

cord immediately after use, before cleaning

the treadmill, and before performing the main-

tenance and adjustment procedures de-

scribed in this manual. Never remove the

motor hood unless instructed to do so by an

authorised service representative. Servicing

other than the procedures in this manual

should be performed by an authorised service

representative only.

23. This treadmill is intended for in-home use

only. Do not use this treadmill in any commer-

cial, rental, or institutional setting.

WARNING: Before beginning this or any exercise program, consult your physician. This

is especially important for persons over the age of 35 or persons with pre-existing health problems.

Read all instructions before using. ICON assumes no responsibility for personal injury or property

damage sustained by or through the use of this product.

SAVE THESE INSTRUCTIONS

The decal shown has been placed on your treadmill. If the decal is miss-

ing, or if it is not legible, please call our Customer Service Department

and order a free replacement decal (see ORDERING REPLACEMENT

PARTS on the back cover of this manual). Apply the replacement decal in

the location shown.

Note: This decal is not shown at actual size.

Thank you for selecting the WESLO CADENCE®55

treadmill. The CADENCE 55 treadmill combines ad-

vanced technology with innovative design to let you

enjoy an excellent form of cardiovascular exercise in

the convenience and privacy of your home. And when

you’re not exercising, the unique CADENCE 55 tread-

mill can be folded up, requiring less than half the floor

space of other treadmills.

For your benefit, read this manual carefully before

using the treadmill.If you have questions after read-

ing this manual, please call our Customer Service

Department at 08457 089 009.To help us assist you,

please note the product model number and serial num-

ber before calling. The model number of the treadmill

isWETL11140. The serial number can be found on a

decal attached to the treadmill (see the front cover of

this manual for the location of the decal).

Before reading further, please review the drawing

below and familiarise yourself with the labelled parts.

BEFORE YOU BEGIN

Handrail

Console

Key/Clip

Circuit Breaker

On/Off Switch

Incline Leg

Walking Belt

Hood

Front Wheel

Foot Rail

Rear Roller

Adjustment Bolts

Water Bottle Holder

(Bottle not included)

Storage Latch

RIGHT SIDE

LEFT SIDE

ASSEMBLY

Assembly requires two persons. Place a mat under the treadmill to protect the floor during assembly. Set

the treadmill in a cleared area and remove all packing materials. Do not dispose of the packing materials until as-

sembly is completed. Note: The underside of the treadmill walking belt is coated with high-performance lubricant.

During shipping, a small amount of lubricant may be transferred to the top of the walking belt or the shipping carton.

This is a normal condition and does not affect treadmill performance. If there is lubricant on top of the walking belt,

simply wipe off the lubricant with a soft cloth and a mild, non-abrasive cleaner.

Assembly requires the included hex key and your own phillips screwdriver ,

adjustable spanner , wire cutters , and needlenose pliers .

For help identifying the assembly hardware, see the part drawings below.

WARNING: Do not plug in the power

cord until the treadmill is completely assembled.

23/4” Bolt (47 )–4

Wheel Nut

(61)–2

3/4” Screw

(77)–10

Upright Bolt (28)–6

Crossbar/Spacer

Screw (86)–4

Silver Ground

Screw (89)–1

1/2” Screw

(92)–2

5/16” Star Washer

(68)–4

3/8” Star Washer

(104)–2

Frame Bolt (36)–2

Wheel Bolt (33)–2

1” Tek Screw

(11)–4

1. Orient the Base (55) so the holes for the four Base Pads

(31) are on top. Attach the four Base Pads to the Base

with the four 1” Tek Screws (11).

Attach the two Wheels (34) to the Base (55) with two

Wheel Bolts (33) and two Wheel Nuts (61) as shown. Do

not overtighten the Bolts. The Wheels must be able

to turn freely.

4. Identify the Right Handrail (5), which has a large hole in

the left side. Feed the Wire Harness (53) into the hole in

the bottom of the Right Handrail and out of the large hole

in the side. Note: It may be helpful to use needlenose pli-

ers to pull the Wire Harness out of the hole.

Set the Right Handrail (5) onto the right Upright (37).

Attach the Right Handrail with a Upright Bolt (28) as

shown. Firmly tighten the Upright Bolt.

Attach the Left Handrail (4) as described above. Note:

There is not a wire harness on the left side.

Hole

3. With the help of a second person, place the Frame (21)

between the Uprights (32, 37). Feed the Wire Harness

(53) into the large round hole near the lower end of the

Right Upright (37), and then pull the Wire Harness out of

the upper end as shown.

See drawing 3a. Raise the Uprights (32, 37) to the vertical

position. Hold an Upright Spacer (58) against one side of

the Frame (21) as shown. Insert a Frame Bolt (36) into the

indicated hole in the Upright Spacer and the Frame. Next,

tighten a Spacer Screw (86) into the Upright Spacer and

the Frame. Remove the Frame Bolt. Repeat on the other

side of the Frame.

With the help of a second person, carefully lift the Frame

(21), and hold the Upright Spacers (58) between the Right

Upright (37) and the Left Upright (not shown). Align the in-

dicated hole in the Right Upright with the hole in the right

Upright Spacer. Next, insert a Frame Bolt (36), with a 3/8”

Star Washer (104), into the Right Upright and the Upright

Spacer, and loosely thread the Upright Bolt into the Frame.

Repeat this step on the left side of the treadmill.

Hole

2. Identify the Right Upright (37), which has a large round

hole near the lower end, and the Left Upright (32).

See drawing 2a. Make sure that there are two U-nuts

(93) in the lower end of each Upright (32, 37).

See drawing 2b. Have a second person hold the Base

(55) so it is resting on the Wheels (34) as shown. Attach

the Right and Left Uprights (32, 37) to the Base with four

Upright Bolts (28) and four 5/16” Star Washers (68). Do

not tighten the Bolts yet. Make sure that the large

hole in the Right Upright is on the side shown, and

that the two small holes in the Left Upright are on the

side shown. In addition, make sure that the Base is

oriented so the Base Pads (31) are in the location

shown.

Large

Hole

Small

Holes

Hole

22a

32, 37

Holes

104

Hole

21 53

6. Place the Console Base (45) on the Right Handrail (5)

and the Left Handrail (not shown). Attach the Console

Base with four 3/4” Screws (77) (only two Screws are

shown). Do not tighten the Screws yet.

Insert the Wire Harness (53) through the two indicated

plastic ties on the Console Base (45). Next, insert the

Wire Harness up through the opening beside the Wire

Cover (50). Make sure that the Wire Cover is securely at-

tached to the Console Base.

See drawing 6a. Look at the top of the Console Base

(45). Insert the Wire Harness (53) through the plastic tie

on top of the Console Base.

Tighten the two Crossbar Screws (86) (only one is

shown).

Ties

Tie

6553

5. See the inset drawings and identify the two Crossbar

Screws (86); be careful not to confuse the Crossbar

Screws with the 3/4” Screws (77). The Crossbar

Screws are slightly larger than the 3/4” Screws.

Hold the Crossbar (65) on the small brackets on the

Handrails (4, 5). Attach the Crossbar to the small brack-

ets with the two Crossbar Screws (86). Do not tighten

the Crossbar Screws yet.

Attach the end of the ground wire on the Wire Harness

(53) to the small hole in the left side of the Right Handrail

(5) with the Silver Ground Screw (89).

Small Bracket

7. Press the Book Rack (49) onto the Console Base (45) in

the location shown.

9. Set the Console (2) on the Console Base (45). Insert the

excess Wire Harness (53) into the large hole in the side of

the Right Handrail (5). Securely tighten the plastic ties

on the bottom of the Console Base to prevent the Wire

Harness from slipping. Then, cut off the ends of the plas-

tic ties.

Attach the Console (2) to the Console Base (45) with four

3/4” Screws (77) and two 1/2” Screws (92).Start all six

Screws before tightening them; do not overtighten

the Screws.

77 92

577

Ties

8. Hold the Console (2) near the Console Base (45). Touch

the Right Handrail (5) to discharge any static. Find

the connector on the end of the Wire Harness (53).

Insert the connector into the red socket beneath the

Console. The connector should slide easily into the

socket and snap into place. If the connector does

not slide easily and snap into place, turn the connec-

tor and then insert it. Make sure that the connector and

wires appear as shown in drawing 8a.

See drawing 6a. Insert the excess Wire Harness (53)

down into the opening in the Console Base (45).

Securely tighten the plastic tie on top of the Console

Base to prevent the Wire Harness from slipping.

Then, cut off the end of the plastic tie. 8a

Ties

10. Lower the Uprights (32, 37) until the Handrails (4, 5) are

touching the floor.

See drawing 10a. Position the Uprights (32, 37) so that

the treadmill Frame (21) is centred between the

Uprights.

Firmly tighten the four Upright Bolts (28). Then, raise the

Uprights (32, 37) back to the vertical position.

Firmly tighten the bolts and screws used in assem-

bly steps 3 through 6.

32, 37

4, 5

Top View

10a

13. Make sure that all parts are properly tightened before you use the treadmill. Note: Extra hardware may

be included. Keep the included hex keys in a secure place. The large hex key is used to adjust the walking

belt (see page 17). To protect the floor or carpet, place a mat under the treadmill.

12. Insert an Incline Leg (47) into the right side of the Frame

(21) as shown, and adjust the Incline Leg to the desired

height. (Note: The Incline Leg can be adjusted to any of

four positions to vary the intensity of your exercise.)

Next, fully insert an Incline Pin (46) into the Frame and

the Incline Leg, and turn the Incline Pin to the “locked”

position shown in drawing 12a.

Insert the other Incline Leg (not shown) and Incline Pin

(46) into the left side of the Frame (21) in the same way.

CAUTION: Before using the treadmill, make sure that

both Incline Pins are fully inserted at the same

height. In addition, make sure that both Incline Pins

are inserted from the direction shown. Do not use

the treadmill without the Incline Pins.

Lower the treadmill (see HOW TO LOWER THE

TREADMILL FOR USE on page 15).

12a

Collar

Spring

11. Attach the Latch Housing (25) and the Latch Spacer (99)

tothe Left Upright (32) with two 3/4” Screws (77). Next,

remove the latch knob from the latch pin. Make sure that

the collar and the spring are on the pin, and insert the

pin into the Latch Housing. Then, tighten the knob back

onto the pin.

Lift the treadmill frame to the storage position (see page

14).

Large

Hole

Knob

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Weslo Tretmühle Handbücher

Weslo

Weslo Cadence 45 Treadmill Bedienungsanleitung

Weslo

Weslo Cadence 50 Ls Bedienungsanleitung

Weslo

Weslo WLTL41582 Bedienungsanleitung

Weslo

Weslo Cadence S6 Treadmill Bedienungsanleitung

Weslo

Weslo compact SL Bedienungsanleitung

Weslo

Weslo cadence 820 WETL91000 Bedienungsanleitung

Weslo

Weslo CADENCE 1005 Bedienungsanleitung

Weslo

Weslo Cadence 6.0 Treadmill Bedienungsanleitung

Weslo

Weslo Cadence Ts5 Bedienungsanleitung

Weslo

Weslo Cadence 16.0 Cwl Treadmill Benutzerhandbuch

Weslo

Weslo Cadence L 290 Bedienungsanleitung

Weslo

Weslo CADENCE 850 WETL85061 Bedienungsanleitung

Weslo

Weslo Cadence Ds23 Bedienungsanleitung

Weslo

Weslo Cadence 1020 Treadmill Bedienungsanleitung

Weslo

Weslo Cadence S 8 Systemhandbuch

Weslo

Weslo Sport 100 Treadmill Bedienungs- und Wartungshandbuch

Weslo

Weslo Lyne 3500 Treadmill Referenzhandbuch

Weslo

Weslo Cadence 45 Treadmill Bedienungsanleitung

Weslo

Weslo Easy compact 2 treadmill Bedienungsanleitung

Weslo

Weslo CADENCE EX14 WCTL29200 Bedienungsanleitung

Weslo

Weslo WLTL29013 Bedienungsanleitung

Weslo

Weslo Cadence A 40 Treadmill Bedienungsanleitung

Weslo

Weslo Crosswalk G 3.2 Treadmill Bedienungsanleitung

Weslo

Weslo WCTL19809.0 Bedienungsanleitung

Beliebte Tretmühle Handbücher anderer Marken

Treadly

Treadly TREADLY 2 Bedienungsanleitung

HEALTH ONE

HEALTH ONE Walk Ro Bedienungsanleitung

NordicTrack

NordicTrack T7.5 S Bedienungsanleitung

Gold's Gym

Gold's Gym ADVANTAGE GGTL12920 Bedienungsanleitung

Merax

Merax MS282992 Bedienungsanleitung

FYTTER

FYTTER RU-2SX Bedienungsanleitung

Precor

Precor 903 Bedienungsanleitung

FitLogic

FitLogic freewill d225 Bedienungsanleitung

HOP-SPORT

HOP-SPORT ESTIMA HS-3200LB Bedienungsanleitung

Horizon Fitness

Horizon Fitness Adventure 5 Plus Bedienungsanleitung

Stamia

Stamia InMotion II Bedienungsanleitung

Smooth Fitness

Smooth Fitness EVO 3i Bedienungsanleitung

NordicTrack

NordicTrack NETL81810.0 Bedienungsanleitung

Schwinn

Schwinn 830/Journey 8.0 Bedienungsanleitung

Keys Fitness

Keys Fitness HealthTrainer HT-740T Bedienungsanleitung

Spirit

Spirit XT8 Bedienungsanleitung

NordicTrack

NordicTrack T 14.0 Treadmill Bedienungsanleitung

Master

Master F22 Bedienungsanleitung