Weslo WLTL39201 Bedienungsanleitung

USER'S MANUAL

QUESTIONS?

If you have questions, or if there

are missing or damaged parts,

we will guarantee complete satis-

faction through direct assistance

from our factory.

TO AVOID UNNECESSARY

DELAYS, PLEASE CALL DIRECT

TO OUR TOLL-FREE CUSTOMER

HOT LINE. The trained techni-

cians on our customer hot line

will provide immediate assis-

tance, free of charge to you.

CUSTOMER HOT LINE:

1-800-999-3756

Mon.–Fri., 6 a.m.–6 p.m. MST

Model No. WLTL39201

Serial No.

Write the serial number in the

space above for future reference.

CAUTION

Read all precautions and instruc-

tions in this manual before using

this equipment. Save this manual

for future reference.

Serial Number Decal

Visit our website at

www.weslo.com

new products, prizes,

fitness tips, and much more!

TABLE OF CONTENTS

IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

OPERATION AND ADJUSTMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

HOW TO FOLD AND MOVE THE TREADMILL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10

MAINTENANCE AND TROUBLE-SHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12

CONDITIONING GUIDELINES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

ORDERING REPLACEMENT PARTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Back Cover

LIMITED WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Back Cover

Note: A PART LIST and an EXPLODED DRAWING are attached in the center of this manual.

1. It is the responsibility of the owner to ensure

that all users of this treadmill are adequately

informed of all warnings and precautions.

2. Use the treadmill only as described in this

manual.

3. Place the treadmill on a level surface, with at

least eight feet of clearance behind it. Do not

place the treadmill on any surface that blocks

air openings. To protect the floor or carpet

from damage, place a mat under the treadmill.

4. Keep the treadmill indoors, away from mois-

ture and dust. Do not put the treadmill in a

garage or covered patio, or near water.

5. Do not operate the treadmill where aerosol

products are used or where oxygen is being

administered.

6. Keep children under the age of 12 and pets

away from the treadmill at all times.

7. The treadmill should not be used by persons

weighing more than 250 pounds.

8. Never allow more than one person on the

treadmill at a time.

9. Wear appropriate exercise clothes when

using the treadmill. Do not wear loose

clothes that could become caught in the

treadmill. Athletic support clothes are recom-

mended for both men and women. Always

wear athletic shoes. Never use the treadmill

with bare feet, wearing only stockings, or in

sandals.

10. When connecting the power cord (see page 7),

plug the power cord into a surge suppressor

(not included) and plug the surge suppressor

into a grounded circuit capable of carrying 15

or more amps. No other appliance should be

on the same circuit. Do not use an extension

cord.

11. Use only a single-outlet surge suppressor that

meets all of the specifications described on

page 7. To purchase a surge suppressor, see

your local WESLO dealer or call 1-800-806-

3651 and order part number 146148.

12. Failure to use a properly functioning surge

suppressor could result in damage to the con-

trol system of the treadmill. If the control sys-

tem is damaged, the walking belt may change

speed or stop unexpectedly, which may result

in a fall and serious injury.

13. Keep the power cord and the surge suppres-

sor away from heated surfaces.

IMPORTANT PRECAUTIONS

WARNING:To reduce the risk of burns, fire, electric shock, or injury to persons, read

the following important precautions and information before operating the treadmill.

14. Never move the walking belt while the power

is turned off. Do not operate the treadmill if

the power cord or plug is damaged, or if the

treadmill is not working properly. (See

BEFORE YOU BEGIN on page 4 if the tread-

mill is not working properly.)

15. Never start the treadmill while you are stand-

ing on the walking belt. Always hold the

handrails while using the treadmill.

16. The treadmill is capable of high speeds.

Adjust the speed in small increments to

avoid sudden jumps in speed.

17. Never leave the treadmill unattended while it

is running. Always remove the key and unplug

the power cord when the treadmill is not in

use.

18. Do not attempt to raise, lower, or move the

treadmill until it is properly assembled. (See

ASSEMBLY on page 5, and HOW TO FOLD

AND MOVE THE TREADMILL on page 10.) You

must be able to safely lift 45 pounds (20 kg) in

order to raise, lower, or move the treadmill.

19. Do not change the incline of the treadmill by

placing objects under the treadmill.

20. When folding or moving the treadmill, make

sure that the storage latch is fully closed.

21. Inspect and tighten all parts of the treadmill

every three months.

22. Never insert or drop any object into any

opening.

23. DANGER:Always unplug the power

cord immediately after use, before cleaning

the treadmill, and before performing the

maintenance and adjustment procedures

described in this manual. Never remove the

motor hood unless instructed to do so by an

authorized service representative. Servicing

other than the procedures in this manual

should be performed by an authorized ser-

vice representative only.

24. This treadmill is intended for in-home use

only. Do not use this treadmill in any com-

mercial, rental, or institutional setting.

WARNING:Before beginning this or any exercise program, consult your physician. This

is especially important for persons over the age of 35 or persons with pre-existing health problems.

Read all instructions before using. ICON assumes no responsibility for personal injury or property

damage sustained by or through the use of this product.

SAVE THESE INSTRUCTIONS

The decal shown below has been placed on your treadmill.

If the decal is missing or illegible, please call our Customer

Service Department, toll-free, to order a free replacement

decal (see ORDERING REPLACEMENT PARTS on the back

cover of this manual). Apply the decal in the location shown.

Note: This decal is shown at 38% of actual size.

BEFORE YOU BEGIN

Thank you for selecting the WESLO®CADENCE ex16

treadmill. The CADENCE ex16 treadmill combines

advanced technology with innovative design to let you

enjoy an excellent form of cardiovascular exercise in

the convenience and privacy of your home. And when

you’re not exercising, the unique CADENCE ex16 can

be folded up, requiring less than half the floor space of

other treadmills.

For your benefit, read this manual carefully before

using the treadmill. If you have additional questions,

please call our Customer Service Department toll-free

at 1-800-999-3756, Monday through Friday, 6 a.m.

until 6 p.m. Mountain Time (excluding holidays). To

help us assist you, please note the product model

number and serial number before calling. The model

number of the treadmill is WLTL39201. The serial

number can be found on a decal attached to the tread-

mill (see the front cover of this manual for the location).

Before reading further, please familiarize yourself with

the parts that are labeled in the drawing below.

Handrails

Console

Storage Latch

Speed Control

Key/Clip

Circuit Breaker

Walking Belt

Foot Rails

Power Cord

Cushioned Deck

BACK RIGHT SIDE

Rear Roller

Adjustment Bolts

Incline Leg

Water Bottle Holder

(Bottle not included) Accessory Tray

Book Rack

3. Attach the Storage Latch (16) to the left Upright (38)

with the two Latch Screws (8). Be careful not to

overtighten the Latch Screws.

ASSEMBLY

Assembly requires two people. Set the treadmill in a cleared area and remove all packing materials. Do not

dispose of the packing materials until assembly is completed. Assembly requires the included allen wrench

and your own phillips screwdriver and adjustable wrench .

Note: The underside of the treadmill walking belt is coated with high-performance lubricant. During shipping, a

small amount of lubricant may be transferred to the top of the walking belt or the shipping carton. This is a nor-

mal condition and does not affect treadmill performance. If there is lubricant on top of the walking belt, simply

wipe off the lubricant with a soft cloth and a mild, non-abrasive cleaner.

2. Using the top and bottom holes in a Handrail

Spacer (3), attach the Handrail Spacer to the left

Upright (38) with two Long Screws (56). Make sure

that the ramps on the Handrail Spacer are on the

inner side as shown.

Attach the other Handrail Spacer (3) to the right

Upright (38) with two Long Screws (56) in the same

way.

3Ramps

56 56

Use these

holes

1. Note that the Right Handrail (32) and the Console

Base (not shown) are connected to the treadmill by

the Wire Harness (53). During assembly steps 1 to

4, be careful to avoid pulling on or damaging the

Wire Harness.

With the help of a second person, raise the Uprights

(38) to the position shown. Insert one of the Base

Legs (44) into the right Upright as shown. Make sure

that the Base Leg Pad (33) is in the indicated posi-

tion. Using the included Allen Wrench (81), attach

the Base Leg with a Base Leg Screw (39). Attach

the other Base Leg (not shown) to the left Upright in

the same way.

Note: One replacement Base Leg Pad (33) and

Spacer (not shown) are included. If a Base Leg Pad

becomes worn and needs to be replaced, use the

replacement Base Leg Pad with the Spacer.

5. Set the Console Base (87) on the Handrails (4, 32).

Route the Wire Harness (53) as shown. Attach the

Wire Harness to the Right Handrail with the Wire

Harness Clip (13) and a Console Screw (5); do not

tighten the Console Screw yet. Then, loosely thread

the other three Console Screws (5) into the Handrails

and the Console Base. After all four Console Screws

are threaded, firmly tighten them; be careful not to

overtighten the Console Screws. Insert the excess

Wire Harness into the Right Handrail.

Tighten the four Handrail Bolts (1) used in step 4.

6. The Console (87) requires two "AA" batteries (not

included); alkaline batteries are recommended.

Open the Battery Cover (7) as shown. Press two bat-

teries into the battery compartment, with the negative

(–) ends of the batteries touching the springs. Close

the battery cover, push up on the battery cover tab,

and then push the tab forward as shown in the inset

drawing. Be sure that the tab locks into place.

7. Make sure that all parts are tight before you use the treadmill. To protect the floor or carpet from dam-

age, place a mat under the treadmill.

687 7

Batteries

Battery Cover Tab

32 4

4. Attach the Left Handrail (4) to the left Handrail Spacer

(3) and the left Upright (38) with two Handrail Bolts (1),

two Handrail Washers (80), and two Internal Washers

(2) as shown. Do not tighten the Handrail Bolts yet.

Note: If you are 5’ 8” or taller, use the lower two

holes in the Left Handrail; if you are shorter than 5’

8”, use the upper two holes.

Refer to drawing 5. Have a second person hold the

Console Base (87) near the Right Handrail (32). Feed

the excess Wire Harness (53) into the upper end of

the right Handrail, while pulling the excess from the

bottom of the Handrail. Then, insert the excess Wire

Harness into the right Upright (38) (see drawing 4).

Attach the Right Handrail (32) to the right Handrail

Spacer (3) and the right Upright (38) as described

above. Do not tighten the Handrail Bolts (1) yet.

Insert a Handrail Cap (70) into the unused hole in

each Handrail (4, 32).

432

353

OPERATION AND ADJUSTMENT

THE PERFORMANT LUBETM WALKING BELT

Your treadmill features a walking belt coated with

PERFORMANT LUBETM, a high-performance lubricant.

IMPORTANT: Never apply silicone spray or other

substances to the walking belt or the walking plat-

form. Such substances will deteriorate the walking

belt and cause excessive wear.

HOW TO PLUG IN THE POWER CORD

Your treadmill, like any other type of sophisticated

electronic equipment, can be seriously damaged by

sudden voltage changes in your home’s power.

Voltage surges, spikes, and noise interference can

result from weather conditions or from other appli-

ances being turned on or off. To decrease the pos-

sibility of your treadmill being damaged, always

use a surge suppressor with your treadmill (see

drawing 1 at the right). To purchase a surge sup-

pressor, see your local WESLO dealer or call

1-800-806-3651 and order part number 146148.

Use only a single-outlet surge suppressor that is

UL 1449 listed as a transient voltage surge sup-

pressor (TVSS). The surge suppressor must have

a UL suppressed voltage rating of 400 volts or

less and a minimum surge dissipation of 450

joules. The surge suppressor must be electrically

rated for 120 volts AC and 15 amps. There must be

a monitoring light on the surge suppressor to indi-

cate whether it is functioning properly. Failure to

use a properly functioning surge suppressor

could result in damage to the control system of

the treadmill. If the control system is damaged, the

walking belt may change speed or stop unexpect-

edly, which may result in a fall and serious injury.

This product must be grounded. If it should mal-

function or break down, grounding provides a path of

least resistance for electric current to reduce the risk

of electric shock. This product is equipped with a cord

having an equipment-grounding conductor and a

grounding plug. Plug the power cord into a surge

suppressor, and plug the surge suppressor into an

appropriate outlet that is properly installed and

grounded in accordance with all local codes and

ordinances. Important: The treadmill is not com-

patible with GFCI-equipped outlets.

This product is for use on a nominal 120-volt circuit,

and has a grounding plug that looks like the plug illus-

trated in drawing 1 below. A temporary adapter that

looks like the adapter illustrated in drawing 2 may be

used to connect the surge suppressor to a 2-pole

receptacle as shown in drawing 2 if a properly

grounded outlet is not available.

The temporary adapter should be used only until a

properly grounded outlet (drawing 1) can be installed

by a qualified electrician.

The green-colored rigid ear, lug, or the like extending

from the adapter must be connected to a permanent

ground such as a properly grounded outlet box cover.

Whenever the adapter is used it must be held in place

by a metal screw. Some 2-pole receptacle outlet

box covers are not grounded. Contact a qualified

electrician to determine if the outlet box cover is

grounded before using an adapter.

DANGER:Improper connection

of the equipment-grounding conductor can

result in an increased risk of electric shock.

Check with a qualified electrician or service-

man if you are in doubt as to whether the

product is properly grounded. Do not modify

the plug provided with the product—if it will

not fit the outlet, have a proper outlet

installed by a qualified electrician.

Grounded Outlet Box

Grounding Plug

Surge Suppressor

Grounding Pin

Adapter

Lug

Metal Screw

Grounded Outlet

Grounding Pin

DIAGRAM OF THE CONSOLE

CAUTION:Before operating the

console, read the following precautions.

• Do not stand on the walking belt when turning

on the power.

• Always wear the clip (see the drawing above)

while using the treadmill. When the key is

removed from the console, the walking belt

will stop.

• Adjust the speed in small increments.

• The training zones marked above the speed

control are general guidelines only. See page

14 for more information.

• To reduce the possibility of electric shock,

keep the console dry. Avoid spilling liquids on

the console. Use only a sealable water bottle.

BATTERY INSTALLATION

Before the console can be operated, two "AA" batter-

ies (not included) must be installed. Refer to assembly

step 6 on page 6 for installation instructions.

STEP-BY-STEP CONSOLE OPERATION

If there is a thin sheet of clear plastic on the face of

the console, remove it.

Before operating the console, make sure that the

power cord is properly plugged in (see page 7).

Follow the steps at the right and on page 9 to operate

the console.

Insert the key fully into the console.

Inserting the key will

not turn on the dis-

plays. The displays will

turn on when the

ON/RESET button is

pressed or when the

walking belt is started.

Note: If you just installed batteries, the displays

will already be on.

Next, step onto the foot rails of the treadmill. Find

the clip attached to the key and slide the clip onto

the waistband of your clothes. Test the clip by

carefully taking a few steps backward until the

key is pulled from the console. If the key is

not pulled from the console, adjust the position

of the clip as needed.

Clip

Key

Displays Incline Control

Speed Control

Reset the speed control.

Slide the speed control to the RESET position.

Note: Each time the walking belt is stopped,

the speed control must be moved to the

RESET position before the walking belt can be

restarted.

Start the walking belt.

After you have moved the speed control to the

RESET position, slowly slide it to the right until

the walking belt begins to move at slow speed.

Carefully step onto the walking belt and begin

walking. Change the speed of the walking belt as

desired by sliding the speed control.

To stop the walking belt, step onto the foot rails

and slide the speed control to the RESET position.

During the first few minutes of using the treadmill,

inspect the alignment of the walking belt, and align

the walking belt if necessary (see page 13).

Monitor your progress with the two displays.

CALS/FAT CALS/

SPEED display—This

display shows the

approximate numbers

of calories and fat

calories you have

burned. (See FAT

BURNING on page 14.) In addition, the display

shows the speed of the walking belt, in miles per

hour. Every seven seconds, the display will

change from one number to the next. Arrows in

the display will indicate which number is currently

shown.

TIME/DISTANCE

display—This display

shows the elapsed

time and distance that

you have walked or

run, in miles. Every

seven seconds, the

display will change from one number to the other.

Arrows in the display will indicate which number is

currently shown.

To reset the displays at

any time, press the

ON/RESET button.

Adjust the incline of the treadmill as desired.

To change the incline

of the treadmill, press

the top or bottom of

the incline control

until the desired

incline level is

reached.

When you are finished exercising, stop the

walking belt and remove the key.

Step onto the foot rails, stop the walking belt and

remove the key from the console. The displays

will turn off about five minutes after the key is

removed. Note: Any time that the walking belt

is stopped and the ON/RESET button is not

pressed for five minutes, the displays will

automatically turn off in order to conserve the

batteries.

HOW TO FOLD AND MOVE THE TREADMILL

HOW TO FOLD THE TREADMILL FOR STORAGE

Before folding the treadmill, unplug the power cord.

CAUTION: You must be able to safely lift 45 pounds (20

kg) in order to raise, lower, or move the treadmill.

1. Hold the treadmill with your hands in the locations shown

at the right. To decrease the possibility of injury, bend

your legs and keep your back straight. As you raise

the treadmill, make sure to lift with your legs rather

than your back. Raise the treadmill about halfway to the

vertical position.

2. Move your right hand to the position shown and hold the

treadmill firmly. Using your left thumb, press the storage

latch and hold it. Pivot the treadmill until the frame and

foot rail are past the storage latch. Close the storage

latch over the catch. Make sure that the storage latch

is fully engaged over the catch.

To protect the floor or carpet from damage, place a

mat under the treadmill. Keep the treadmill out of

direct sunlight. Do not leave the treadmill in the stor-

age position in temperatures above 85° Fahrenheit.

HANDRAIL HEIGHT ADJUSTMENT

The Handrails (4, 32) can be adjusted to either of two

heights. Before adjusting the Handrails, remove the key

and unplug the power cord.

Remove the four Console Screws (5). While a second per-

son holds the Console Base (87), remove the Handrail Bolts

(1), Handrail Washers (80), and Internal Washers (2). Raise

or lower the Handrails (4, 32) to the desired height, being

careful not to damage the Wire Harness (53). Reattach the

Handrails with the Handrail Bolts, Handrail Washers, and

Internal Washers. (Important: If you are 5’ 8” or taller, use

the lower two holes in the Handrails; if you are shorter

than 5’ 8”, use the upper two holes. Make sure that both

Handrails are at the same height. Do not tighten the

Handrail Bolts yet. Always attach each Handrail with two

Handrail Bolts.) Reattach the Console Base (87) (see

assembly step 4 on page 6). Then, tighten the four Handrail

Bolts.

Insert a Handrail Cap (70) into the unused hole in each

Handrail (4, 32).

Storage

Latch

Catch

Closed

432

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Weslo Tretmühle Handbücher

Weslo

Weslo Cadence 60 CT Bedienungsanleitung

Weslo

Weslo Cadence 927 Bedienungsanleitung

Weslo

Weslo Cadence 450v Treadmill Bedienungs- und Wartungshandbuch

Weslo

Weslo Cadence R 5.2 Treadmill Bedienungsanleitung

Weslo

Weslo CADENCE c22 Bedienungsanleitung

Weslo

Weslo Cadence Ds11 Bedienungsanleitung

Weslo

Weslo Cadence 900 Treadmill Bedienungsanleitung

Weslo

Weslo Cadence 150 Treadmill Bedienungsanleitung

Weslo

Weslo CARDIO STRIDE 4.0 Bedienungsanleitung

Weslo

Weslo Cadence 10.0s Bedienungsanleitung

Weslo

Weslo WLTL48410 Bedienungsanleitung

Weslo

Weslo Lyne 3500 Treadmill Referenzhandbuch

Weslo

Weslo Cadence 21.0 Cwl Treadmill Bedienungs- und Wartungshandbuch

Weslo

Weslo Cadence 915 Benutzerhandbuch

Weslo

Weslo Cadence 800 Treadmill Systemhandbuch

Weslo

Weslo Sport 350 Treadmill Bedienungsanleitung

Weslo

Weslo Cadence 800 Treadmill Benutzerhandbuch

Weslo

Weslo Cadence 80 Treadmill Bedienungsanleitung

Weslo

Weslo Cadence 16.0 Cwl Treadmill Bedienungsanleitung

Weslo

Weslo CADENCE 340 CS Bedienungsanleitung

Weslo

Weslo Cadence 55 Bedienungsanleitung

Weslo

Weslo Crosswalk 365e Treadmill Bedienungsanleitung

Weslo

Weslo Cadence 835 An Bedienungsanleitung

Weslo

Weslo Cadence 900 Treadmill Bedienungsanleitung

Beliebte Tretmühle Handbücher anderer Marken

Treadly

Treadly TREADLY 2 Bedienungsanleitung

HEALTH ONE

HEALTH ONE Walk Ro Bedienungsanleitung

NordicTrack

NordicTrack T7.5 S Bedienungsanleitung

Gold's Gym

Gold's Gym ADVANTAGE GGTL12920 Bedienungsanleitung

Merax

Merax MS282992 Bedienungsanleitung

FYTTER

FYTTER RU-2SX Bedienungsanleitung

Precor

Precor 903 Bedienungsanleitung

FitLogic

FitLogic freewill d225 Bedienungsanleitung

HOP-SPORT

HOP-SPORT ESTIMA HS-3200LB Bedienungsanleitung

Horizon Fitness

Horizon Fitness Adventure 5 Plus Bedienungsanleitung

Stamia

Stamia InMotion II Bedienungsanleitung

Smooth Fitness

Smooth Fitness EVO 3i Bedienungsanleitung

NordicTrack

NordicTrack NETL81810.0 Bedienungsanleitung

Schwinn

Schwinn 830/Journey 8.0 Bedienungsanleitung

Keys Fitness

Keys Fitness HealthTrainer HT-740T Bedienungsanleitung

Spirit

Spirit XT8 Bedienungsanleitung

NordicTrack

NordicTrack T 14.0 Treadmill Bedienungsanleitung

Master

Master F22 Bedienungsanleitung