Whalen AVCBEC60-SMB Bedienungsanleitung

THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION.

PLEASE READ AND KEEP FOR FUTURE REFERENCE.

Date 2016-11-02 Rev. 0001-B Factory: KONRIC

TV Console

Model # AVCBEC60-SMB

ADULT ASSEMBLY REQUIRED

If you have any questions regarding assembly or if parts are missing, DO NOT return this item to the

store where it was purchased. Please call our toll-free customer service number and have your

instructions and parts list ready to provide the model name, part name or factory number:

1-866-942-5362

Pacific Standard Time: 8:30 a.m. - 4:30 p.m., Monday - Friday

Or visit our web site 24 hours a day, 7 days a week for product assistance at

www.whalenfurniture.com

Or e-mail your request to parts@whalenfurniture.com

LOT NUMBER:

DATE PURCHASE

MANUFACTURER: Whalen Furniture Manufacturing

CATALOG: TV Console (AVCBEC60-SMB)

MADE IN CHINA

How to adjust the European adjustable hinges on doors

Shipping may cause doors to go out of alignment. If you find that the doors need to be adjusted slightly,

turn the appropriate screw, as illustrated.

1. TO ADJUST DOOR FORWARD OR BACKWARD.

2. TO ADJUST DOOR TO RIGHT OR TO LEFT.

3. TO ADJUST DOOR UP OR DOWN.

MAXIMUM RECOMMENDED WEIGHT LOADS

MAXIMUM LOAD 50 lb. (22.6 kg)

FITS UP TO MOST 70” FLAT PANEL TVs

MAXIMUM LOAD 135 lb. (61.2 kg)

PLACE TV BEHIND THE STOPPER

THIS UNIT IS NOT INTENDED FOR USE WITH CRT TVS. USE ONLY WITH

FLAT PANEL TVS AND AUDIO/VIDEO EQUIPMENT MEETING RECOMMENDED SIZE AND

WEIGHT LIMITS. NEVER USE WITH LARGER/HEAVIER THAN RECOMMENDED FLAT PANEL

TVS OR EQUIPMENT. TO AVOID INSTABILITY, PLACE FLAT PANEL TV IN THE CENTER OF

THE UNIT; THE BASE OF THE TELEVISION MUST BE ABLE TO REST ON THE SUPPORTING

SURFACE OF THE UNIT WITHOUT OVER-HANGING THE EDGES. IMPROPERLY POSITIONED

FLAT PANEL TVS, OR FLAT PANEL TVS INCLUDING OTHER EQUIPMENT THAT EXCEED

RECOMMENDED SIZE AND WEIGHT LIMITS COULD FALL OFF OR BREAK THE UNIT,

CAUSING POSSIBLE SERIOUS INJURY.

IMPORTANT

Before you begin: Open, identify and count all parts prior to assembly. Lay out parts on a flat and non-

abrasive surface. You will need the parts identified on page 4 of this instruction manual.

NOTE: IT IS VERY IMPORTANT TO USE GLUE WITH DOWELS. EXCESS GLUE CAN BE WIPED OFF

WITH DAMP CLOTH.

Insert Dowel at least half way by tapping lightly with a rubber mallet, IF NECESSARY.

CAM LOCK SYSTEM OPERATION

HOW THE KNOCK DOWN (KD) ASSEMBLY SYSTEM WORKS

1. Screw the Cam Bolt into the threaded inserts on the panel. Connect both panels together; making sure Cam

Bolt goes into the pre-drilled hole on the end of panel for Cam Lock.

2. Insert the Cam Lock into the pre-drilled large hole on the panel. Make sure the arrow on the face of Cam

Lock faces out and points towards Cam Bolt.

3. Take a Phillips screwdriver and rotate the Cam Lock clockwise to lock the Cam Bolt in place.

4. Plug the Cam Lock Cover into the cross slot of the Cam Lock to conceal the Cam.

You are now ready to assemble the KD unit.

FINAL

1 2 43

Parts and Hardware List

Please read completely through the instructions and verify that all listed parts and hardware are present

before beginning assembly.

A- Top Panel (1) B- Side Panel (2) C- Left Partition Panel (1)

D- Right Partition Panel (1) E- Base (1) F- Door (2)

G- Large Adjustable Shelf (2) H- Small Adjustable Shelf (4) I- Back Panel (1) J- Cable Wheel (2)

(1) Cam Lock (12+1 extra)

(2) Cam Bolt

(12+1 extra)

(3) M8 x 30 mm Wood Dowel (16+1 extra)

(4) M3.5 x 16 mm Washer Head Screw (5) M4 x 40 mm Wood Screw (6) Knob (7) Knob Bolt

(24+1 extra)

(4+1 extra) (2) (2)

(8) Ø1/4" x 3/4" Bolt (9) Shelf Pin (10) Cam Lock Cover (11) Acrylic Stopper

(4+1 extra) (24+1 extra) (12+1 extra) (1)

(12)

Rubber Pad

Glue Touch-up Pen Tipping Restraint Hardware Kit (2)

(4+1 extra)

(1)

(Included in plastic bag)

Tools required: Phillips screwdriver and Hammer (not provided).

Assembly Instructions

1. Unpack the unit and confirm that you have all the hardware and required parts. Assembly the unit on a

carpeted floor or the empty carton to avoid any scratch.

2. Securely screw the Cam Bolts (2) into the designated small holes on the Top Panel (A) and the Base (E)

with a Phillips screwdriver, as shown in the illustration.

NOTE: Screw-in cam bolts must be screwed down flush.

Cam Bolt

(12 used in this step)

②

A/E

Assembly Instructions

3. Insert two Wood Dowels (3) into the inner end holes of each Side Panel (B). Tap in with a rubber mallet,

if necessary. Make sure that you use a small amount of glue with both ends of all dowels.

NOTE: It is very important to use a small mount of glue on both ends of dowels.

4. Align the large holes on the Base (E) with the inserted Wood Dowels (3) on one Side Panel (B), then

press them together. Make sure that the slot on the hinge base will face toward the same direction as the

front of the Base. Secure the Side Panel (B) in place by engaging two Cam Locks (1) (Refer to page 3

on Cam Lock system operation supplement).

5. Repeat last step to combine the other Side Panel (B) and the Base (E) together.

M8 x 30 mm Wood Dowel

(4 used in this step)

③

Cam Lock

(4 used in this step)

①

Assembly Instructions

6. Insert two Wood Dowels (3) into the inner holes on the bottom edge of each Partition Panel (C and D)

and fasten them to the Base (E) with four M4 x 40 mm Wood Screws (5), as shown. Make sure the

threaded inserts for Cable Wheel on the Partition Panels (C and D) face the back of the unit.

NOTE: Press the Partition Panels (C and D) to the Base (E) while tightening the screws.

FRONT

M4 x 40 mm

Wood Screw

(4 used in this step)

⑤

M8 x 30 mm Wood Dowel

(4 used in this step)

③

Assembly Instructions

7. Insert eight Wood Dowels (3) into the inner holes on the top edge of Side Panels (B) and Partition

Panels (C and D).

8. Position the Top Panel (A) onto the inserted Wood Dowel (3) making sure the back egde are even with

each other. Attach the Top Panel (A) in place by engaging eight Cam Locks (1). As shown.

M8 x 30 mm Wood Dowel

(8 used in this step)

③

Cam Lock

(8 used in this step)

①

Assembly Instructions

9. Stand the assembled unit upright.

10. Now, go back and securely tighten all the Cam Locks and Wood Screws. Make sure all the parts are

tight and there are no gaps between the pieces. This will help keep the unit square.

11. Using the pilot holes as a guide, align and attach the Back Panel (I) to the assembled unit by using

twenty-four 16 mm Washer Head Screws (4) through the drilled holes on the Back Panel and screw into

place. Make sure that the overlaps on the panels are even all the way around.

NOTE: We recommend attaching back panel with the screws at the corners first.

M3.5 x 16 mm

Washer Head Screw

(24 used in this step)

④

Assembly Instructions

12. Attach two Cable Wheels (J) to the threaded inserts on the back side of Partition Panels (C and D) with

four 3/4” Bolts (8). You can use the Cable Wheels to organize your cables and cords.

Ø1/4" x 3/4" Bolt

(4 used in this step)

⑧

Andere Handbücher für AVCBEC60-SMB

Inhaltsverzeichnis

Sprachen:

Andere Whalen Inneneinrichtung Handbücher

Whalen

Whalen Raine File White Bedienungsanleitung

Whalen

Whalen Bayside MLDR Bedienungsanleitung

Whalen

Whalen Bayside FURNISHINGS CSC7PD-12-T Bedienungsanleitung

Whalen

Whalen Bayside CSC72LC-1 Bedienungsanleitung

Whalen

Whalen Villa Tuscano Bedienungsanleitung

Whalen

Whalen Bayside CSC7PD-5 Bedienungsanleitung

Whalen

Whalen BBAT27TC Bedienungsanleitung

Whalen

Whalen WF30DVW Bedienungsanleitung

Whalen

Whalen Breenly SPUS-BRMF-WH Bedienungsanleitung

Whalen

Whalen Santa Fe Writing Desk Bedienungsanleitung

Whalen

Whalen Barkston Lane Desk with Hutch Bedienungsanleitung

Whalen

Whalen WHA-10005 Bedienungsanleitung

Whalen

Whalen odus-tdpd Bedienungsanleitung

Whalen

Whalen Bayside CSCTOTBB-1 Bedienungsanleitung

Whalen

Whalen Bayside CUS60WD-5 Bedienungsanleitung

Whalen

Whalen Aurora ARFP72CRS-6 Bedienungsanleitung

Whalen

Whalen WSF54BF23-3 Bedienungsanleitung

Whalen

Whalen Emergent SPUS-EGDB Bedienungsanleitung

Whalen

Whalen WF24GVB Bedienungsanleitung

Whalen

Whalen Bayside Furnishings MLTOFBB Bedienungsanleitung

Whalen

Whalen WMCPRO-6 Bedienungsanleitung

Whalen

Whalen Bayside Furnishings CSC72LBK-6 Bedienungsanleitung

Whalen

Whalen Kendal Desk Bedienungsanleitung

Whalen

Whalen Stirling Desk SPLS-ST60D Bedienungsanleitung

Beliebte Inneneinrichtung Handbücher anderer Marken

Homelegance

Homelegance California 1662PEK-1CK Bedienungsanleitung

Osmond Ergonomics

Osmond Ergonomics FLO Bedienungsanleitung

OVE

OVE ELOISE 42 Bedienungsanleitung

overstock

overstock MF286255 Bedienungsanleitung

Sonoma

Sonoma 160-801 Bedienungsanleitung

BOLERO

BOLERO Wicker Side Chair CF158 Installationsanleitung

Coaster

Coaster 4799N Bedienungsanleitung

Stor-It-All

Stor-It-All WS39MP Programmierhandbuch

Lexicon

Lexicon 194840161868 Bedienungsanleitung

Next AMELIA NEW 462947 Bedienungsanleitung

impekk

impekk Manual II Bedienungsanleitung

Elements

Elements Ember Nightstand CEB700NSE Bedienungsanleitung

JWA

JWA CARY 68429 Bedienungsanleitung

VIPACK

VIPACK AMORI AMKB9014 Bedienungsanleitung

Rowico

Rowico SANNA Bedienungsanleitung

Southern Enterprises

Southern Enterprises CK556000TX Bedienungsanleitung

hygena

hygena 314/5041 Bedienungsanleitung

VINNOVA

VINNOVA Kinsley 536060S Bedienungsanleitung