Whalen Stirling Desk SPLS-ST60D Bedienungsanleitung

THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION.

PLEASE READ AND KEEP FOR FUTURE REFERENCE.

Date 2021-03-31 Rev. 0001-A

Stirling Desk

Model # SPLS-ST60D

ADULT ASSEMBLY REQUIRED DUE TO THE PRESENCE OF SMALL PARTS, SHARP

POINTS, SHARP EDGES AS RECEIVED

If you have any questions regarding assembly or if parts are missing, DO NOT return this item to the

store where it was purchased. Please call our toll-free customer service number and have your

instructions and parts list ready to provide the model name, part name or factory number:

1-866-942-5362

Pacific Standard Time: 8:30 a.m. - 4:30 p.m., Monday - Friday

Or visit our web site 24 hours a day, 7 days a week for product assistance at

www.whalenfurniture.com

Or e-mail your request to parts@whalenfurniture.com

LOT NUMBER:

DATE PURCHASED: / /

MANUFACTURER: Whalen Furniture Manufacturing

CATALOG: Stirling Desk

MODEL # SPLS-ST60D

SPECIAL NOTE

Please read the instruction sheets completely before assembly. Examine all packaging

material before discarding carton. Remove any remaining staples from the carton before

discarding. Remove all parts from carton and separate into groups as indicated on part

list. Please ensure all parts are included prior to assembly. Use of power tools to

complete assembly is not recommended.

M A X I M U M R E C O M M E N D E D W E I G H T L O A D S

THIS UNIT IS INTENDED ONLY FOR USE WITHIN THE MAXIMUM

WEIGHTS INDICATED. USE WITH LOAD HEAVIER THAN THE MAXIMUM WEIGHTS

INDICATED MAY RESULT IN INSTABILITY, CAUSING POSSIBLE INJURY.

MAXIMUM LOAD 9.1 kg / 20 lb.

MAXIMUM LOAD 90.7 kg / 200 lb.

CAM LOCK SYSTEM OPERATION

HOW THE KNOCK DOWN (KD) ASSEMBLY SYSTEM WORKS

1. Screw the Cam Bolt into the threaded inserts on the panel. Connect both panels together; making sure Cam

Bolt goes into the pre-drilled hole on the end of panel for Cam Lock.

2. Insert the Cam Lock into the pre-drilled large hole on the panel. Make sure the arrow on the face of Cam

Lock faces out and points towards Cam Bolt.

3. Take a Phillips screwdriver and rotate the Cam Lock clockwise to lock the Cam Bolt in place.

You are now ready to assemble the KD unit.

123

FURNITURE TIPPING RESTRAINT

YOUNG CHILDREN MAY BE INJURED BY TIPPING FURNITURE AND YOU

MUST USE THIS TIPPING RESTRAINT TO ATTACH THIS UNIT TO THE WALL,

TO PREVENT ACCIDENTS AND/OR INJURIES.

THIS HARDWARE MUST BE PROPERLY INSTALLED (FOLLOW ALL

DIRECTIONS IN ORDER ON THIS INSTRUCTIONS), TO PROVIDE PROTECTION

AGAINST THE UNEXPECTED TIPPING OF FURNITURE DUE TO IMPROPER

USE.

THIS PRODUCT IS ONLY A DETERRENT. IT IS NOT A SUBSTITUTE FOR

PROPER ADULT SUPERVISION. USE OF TIP-OVER RESTRAINTS MAY ONLY

REDUCE, BUT NOT ELIMINATE, THE RISK OF TIP-OVER.

Children have died from furniture tipover.

To reduce the risk of furniture tipover:

 ALWAYS install tipover restraint provided.

 NEVER put a TV on this product.

 NEVER allow children to stand, climb or hang

on drawers, doors, or shelves.

 NEVER open more than one drawer at a time.

 Place heaviest items in the lowest drawers.

Use of tip-over restraints may only reduce,

but not eliminate, the risk of tip-over.

WARNING

Parts and Hardware List

Please read completely through the instructions and verify that all listed parts and hardware are present

before beginning assembly.

A- Desk Top (Qty. 1) B- Modesty Panel (Qty. 1)

C- Left Side Frame (Qty. 1) D- Right Side Frame (Qty. 1) E- Top Front Stretcher (Qty. 1)

(1) Cam Lock (2) Self Tapping Cam Bolt (3) Cam Bolt

(Qty. 7+1 extra) (Qty. 3+1 extra) (Qty. 4+1 extra)

(4) 1/4" x 15 mm Bolt (5) 1/4" x 32 mm Bolt (6) Lock Washer

(Qty. 4+1 extra) (Qty. 6+1 extra) (Qty. 10+1 extra)

(7) Flat Washer Hex Wrench Tipping Restraint Hardware Kit (Qty. 1)

(Qty. 10+1 extra) (Qty. 1) (Included in plastic bag)

Tools required (not included): Phillips screwdriver, stud finder, pencil, tape measure, power drill and 1/8 in drill bit.

DRAWER INSTALLATION

If you need to remove the drawers with ball bearing slides from the unit, please follow the steps

below to prevent any damage to the slides or the drawers.

1. If you need to remove the drawer, please pull the drawer all the way out, then simultaneously

pushes the plastic release lever of the ball bearing slide up on one side and down on the other

side, and then pull the drawer completely out.

2. To place the drawer back, simply push the ball bearing cart all the way to the end of the slides

(in both sides) and align the slide runners on the drawer with the slide tracks on the unit and

push it carefully inside until it stops.

NOTE: If the drawer does not go in smoothly, please take it out and repeat the step.

Release lever

FRONT

Ball bearing cart

FRONT

Assembly Instructions

NOTE: Please do not fully tighten all bolts until you finish assembling all parts. Once assembled, go

back and fully tighten all bolts. This will make the assembly easier.

1. Unpack the unit and confirm that you have all the hardware and required parts. Assemble the unit on

a carpeted floor or the empty carton to avoid any scratch.

2. Place the Desk Top (A) upside down on a level and protected surface.

3. Securely screw the Cam Bolts (2) into the designated small holes on the Desk Top (A) with a Phillips

screwdriver. DO NOT overtighten the Cam Bolts.

NOTE: Screw-in cam bolts must be screwed down flush.

4. Securely screw the Cam Bolts (3) into the threaded holes on the Side Frames (C and D) with a Phillips

screwdriver.

Assembly Instructions

5. Align and attach the Modesty Panel (B) to the Right Side Frame (D) by engaging two Cam Locks (1).

(Refer to page 3 on Cam Lock system operation supplement).

6. Align and attach the Top Front Stretcher (E) to the Right Side Frame (D) using two 15 mm Bolts (4) and

two Washers (6 and 7).

The cam locks face inward

467

Assembly Instructions

7. Repeat the same procedure to attach the Left Side Frame (C) at the opposite end.

8. Using the cam bolts as a guide, align and attach the previous assembly to the Desk Top (A) by engaging

three Cam Locks (1).

9. Fasten the assembled Top Front Stretcher (E) and Side Frames (C and D) to the Desk Top (A) with six

32 mm Bolts (5) and six Washers (6 and 7).

C/D

Assembly Instructions

Tools required (not provided): Phillips screwdriver, stud finder, tape measure, pencil, power drill and 1/8”

drill bit.

10. With the assistance of another adult, lift the assembled unit upright and position at the desired location

against a wall. If necessary, adjust the floor levelers by hand to correct the tilting.

11. Now, follow the instructions printed on the plastic bag containing the Tipping Restraint Hardware to

attach the tip-over restraints to the unit and the wall.

NOTE: The tipping restraint hardware included is for wooden stud wall construction. It must be attached

to a wall stud. Depending upon your wall construction, different anchor hardware maybe required. Please

contact your local hardware store for assistance. Young children can be seriously injured by tipping

furniture. You must install the tipping restraint hardware with the unit to prevent the unit from tipping,

causing any accidents or damage. The tipping restraints are intended only as a deterrent, they are not a

substitute for proper adult supervision. The tipping restraints are not earthquake restraints. If you wish to

add the extra security of earthquake restraints, they must be purchased and installed separately.

12. The unit is now ready for use.

Wooden stud

Wall

g screw

Short screw

Floor leveler

Metal bracket

Nylon strap

Inhaltsverzeichnis

Sprachen:

Andere Whalen Inneneinrichtung Handbücher

Whalen

Whalen Crestwood MNFP68CW30MB Bedienungsanleitung

Whalen

Whalen WSHD5PSB Bedienungsanleitung

Whalen

Whalen odus-tdpd Bedienungsanleitung

Whalen

Whalen Kellum WMFP54EC-26GR Bedienungsanleitung

Whalen

Whalen Barkston Lane SPUS-BLDH Bedienungsanleitung

Whalen

Whalen Barkston SPLS-BKLF Bedienungsanleitung

Whalen

Whalen Pecan pier w/Hutch Bedienungsanleitung

Whalen

Whalen Devon EC-DE48D Bedienungsanleitung

Whalen

Whalen Devon File EC-DEDF Bedienungsanleitung

Whalen

Whalen XLCD-15 Bedienungsanleitung

Whalen

Whalen WF48GVB Bedienungsanleitung

Whalen

Whalen ODUS48CD-V Bedienungsanleitung

Whalen

Whalen MLCRD Bedienungsanleitung

Whalen

Whalen Better Homes and Gardens Ellis Shutter Bedienungsanleitung

Whalen

Whalen BJAVCL65-3 Bedienungsanleitung

Whalen

Whalen Fallbrook SPUS-FBSF-GM Bedienungsanleitung

Whalen

Whalen Bayside Furnishings CUS7PD-3-BL Bedienungsanleitung

Whalen

Whalen Bayside Furnishings CSC5430WD-4PC Bedienungsanleitung

Whalen

Whalen TV Console BBAVCL54-SMB Bedienungsanleitung

Whalen

Whalen LANTOFLBB Bedienungsanleitung

Whalen

Whalen WF24HVO Bedienungsanleitung

Whalen

Whalen Bayside CSC7PD-5 Bedienungsanleitung

Whalen

Whalen Cohen Series Bedienungsanleitung

Whalen

Whalen WSHK5SQB Bedienungsanleitung

Beliebte Inneneinrichtung Handbücher anderer Marken

Homelegance

Homelegance California 1662PEK-1CK Bedienungsanleitung

Osmond Ergonomics

Osmond Ergonomics FLO Bedienungsanleitung

OVE

OVE ELOISE 42 Bedienungsanleitung

overstock

overstock MF286255 Bedienungsanleitung

Sonoma

Sonoma 160-801 Bedienungsanleitung

BOLERO

BOLERO Wicker Side Chair CF158 Installationsanleitung

Coaster

Coaster 4799N Bedienungsanleitung

Stor-It-All

Stor-It-All WS39MP Programmierhandbuch

Lexicon

Lexicon 194840161868 Bedienungsanleitung

Next AMELIA NEW 462947 Bedienungsanleitung

impekk

impekk Manual II Bedienungsanleitung

Elements

Elements Ember Nightstand CEB700NSE Bedienungsanleitung

JWA

JWA CARY 68429 Bedienungsanleitung

VIPACK

VIPACK AMORI AMKB9014 Bedienungsanleitung

Rowico

Rowico SANNA Bedienungsanleitung

Southern Enterprises

Southern Enterprises CK556000TX Bedienungsanleitung

hygena

hygena 314/5041 Bedienungsanleitung

VINNOVA

VINNOVA Kinsley 536060S Bedienungsanleitung