Whalen Legeant Hutch Bedienungsanleitung

THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION.

PLEASE READ AND KEEP FOR FUTURE REFERENCE.

Whalen Furniture Mfg., Inc. Page 1 Factory No. 16015

Legeant Hutch

Model # SPCA-LHTC

ADULT ASSEMBLY REQUIRED DUE TO THE PRESENCE OF SMALL PARTS, SHARP

POINTS, SHARP EDGES AS RECEIVED. 2 PEOPLE RECOMMENDED.

If you have any questions regarding assembly or if parts are missing, DO NOT return this item to the

store where it was purchased. Please call our toll-free customer service number and have your

instructions and parts list ready to provide the model name, part name or factory number:

1-866-942-5362

Pacific Standard Time: 8:30 a.m. - 4:30 p.m., Monday - Friday

Or visit our web site 24 hours a day, 7 days a week for product assistance at

www.whalenfurniture.com

Or e-mail your request to [email protected]

LOT NUMBER:

DATE PURCHASED: / /

Model # SPCA-LHTC

Please call for replacement parts or assistance: 1-866-942-5362

Whalen Furniture Mfg., Inc. Page 2 Factory No. 16015

Important

Before you begin: Open, identify and count all parts prior to assembly. Lay out parts on a flat and non-

abrasive surface. You will need the parts identified on page 3 of this instruction manual.

NOTE: IT IS VERY IMPORTANT TO USE GLUE WITH DOWELS. EXCESS GLUE CAN BE WIPED OFF

WITH DAMP CLOTH.

Insert Dowel at least half way by tapping lightly with a rubber mallet, IF NECESSARY.

CAM LOCK SYSTEM OPERATION

HOW THE KNOCK DOWN (KD) ASSEMBLY SYSTEM WORKS

1. Screw the Cam Bolt into the threaded inserts on the panel. Connect both panels together; making sure Cam

Bolt goes into the pre-drilled hole on the end of panel for Cam Lock.

2. Insert the Cam Lock into the pre-drilled large hole on the panel. Make sure the arrow on the face of Cam

Lock faces out and points towards Cam Bolt.

3. Take a Phillips screwdriver and rotate the Cam Lock clockwise to lock the Cam Bolt in place.

4. Plug the Cam Lock Cover into the cross slot of the Cam Lock to conceal the Cam.

You are now ready to assemble the KD unit.

XXFINAL

12 43

Model # SPCA-LHTC

Please call for replacement parts or assistance: 1-866-942-5362

Whalen Furniture Mfg., Inc. Page 3 Factory No. 16015

Parts and Hardware List

Please read completely through the instructions and verify that all listed parts and hardware are present

before beginning assembly.

A- Top Panel (1) B- Fixed Shelf (1) C- Left Side Panel (1)

D- Right Side Panel (1) E- Back Stretcher (1) F- Partition Panel (2) G- Door Panel (2)

H- Large Adjustable Shelf (1) I- Small Adjustable Shelf (2) J- Back Panel (1)

(1) Cam Lock (2) Cam Bolt (3) M8 x 30 mm Wood Dowel (4) #6 x 1/2” Zinc Screw

(18+1 extra) (18+1 extra) (18+1 extra) (20+1 extra)

(5) #6 x 5/8” Screw (6) Shelf Pin (7) Cam Lock Cover with Cross (8) Cam Lock Cover

(35+1 extra) (12+1 extra) (12+1 extra) (4+1 extra)

(9) Rubber Pad (10) Door Stopper (11) Straight Metal Bracket (12) Door Hinge

(2+1 extra) (2) (2) (4 sets)

(13) Handle (2) (14) Handle Bolt (4) Glue (1) Touch-up Pen (1) Tipping Restraint Hardware Kit (2)

(Inside Plastic Bag)

Tools required: Phillips screwdriver and Mallet (not provided).

Model # SPCA-LHTC

Please call for replacement parts or assistance: 1-866-942-5362

Whalen Furniture Mfg., Inc. Page 4 Factory No. 16015

Assembly Instructions

1. Unpack the unit and confirm that you have all the hardware and required parts. Assembly the unit on a

carpeted floor or the empty carton to avoid any scratch.

2. Place the Top Panel (A), the Fixed Shelf (B) and the Side Panels (C and D) on a level and protective

surface with the holes facing up. Securely screw the Cam Bolts (2) into the designated small holes, as

shown in the illustration.

3. With the pilot holes as a guide, fasten two Hinge Bases (12) to the Side Panels (C and D) respectively,

using two 1/2” Screws (4) per hinge. Make sure that the slot on the top of Hinge Base faces the closest

edge.

Model # SPCA-LHTC

Please call for replacement parts or assistance: 1-866-942-5362

Whalen Furniture Mfg., Inc. Page 5 Factory No. 16015

Assembly Instructions

4. Fasten 2 Door Stoppers (10) to the Top Panel (A) with the right-angle side pointing towards the front of

the unit, using two 1/2” Screws (4) per stopper. As shown below.

5. Insert two Wood Dowels (3) into the inner end holes of one Partition Panel (F). Tap in with a mallet, if

necessary. Make sure you use a small amount of glue with both ends of all dowels.

NOTE: It is very important to use a small amount of glue on both ends of dowels.

6. Align the inserted Wood Dowels (3) on the Partition Panel (F) with the drilled holes on the Fixed Shelf

(B) and press them together. Make sure that the raw edges on both Fixed Shelf and Partition Panel point

towards the same direction and the Cam Lock holes face outward. As shown below. Fasten the Partition

Panel (F) to the Fixed Shelf (B) by engaging 2 Cam Locks (1). (Refer to page 2 on Cam Lock system

operation supplement).

7. Repeat the same procedure to attach the other Partition Panel (F).

Model # SPCA-LHTC

Please call for replacement parts or assistance: 1-866-942-5362

Whalen Furniture Mfg., Inc. Page 6 Factory No. 16015

Assembly Instructions

8. Insert two Wood Dowels (3) into the inner end holes of the Fixed Shelf (B) at both sides. Align and

attach the Left Side Panel (C) to the Fixed Shelf (B) by engaging two Cam Locks (1). As shown below.

9. Attach the Back Stretcher (E) to the Left Side Panel (C) using one Wood Dowel (3) and one Cam Lock

(1). As shown. Ensure the Cam Lock will point towards the back of the unit.

10. Repeat the same procedure to attach the Right Side Panel (D) at the other end.

11. Insert 8 Wood Dowels (3) into the top inner holes of the assembled unit. DO NOT put dowels into the

cam bolt holes. Position the Top Panel (A) onto the inserted Wood Dowels (3) making sure the installed

door stoppers face the front of the unit. Fasten the Top Panel (A) in place by engaging 8 Cam Locks (1).

Model # SPCA-LHTC

Please call for replacement parts or assistance: 1-866-942-5362

Whalen Furniture Mfg., Inc. Page 7 Factory No. 16015

Assembly Instructions

12. Now, go back and tighten all Cam Locks and Screws. Make sure that all the parts are tight and there are

no gaps between the pieces. This will help keep the unit square.

13. Unfold the Back Panel (J) and lay it to the back edges of the assembled unit, as shown. Make sure the

overlaps on the panels are even all the way around. Secure the Back Panel (J) in place using the 5/8”

Screws (5). We recommend attaching the back panel with the screws at the corners first.

14. Stand the assembled unit upright.

15. Extend the Hinge Arms (12) and rest the hinge cups onto the cutouts of Door Panels (G), as shown.

Secure the Hinge Arms in place by using two 1/2” Zinc Screws (4) in each.

16. Pick up one Door Panel (G) and attach the extended Hinge Arms to the Hinge Bases installed on the

Right Side Panel (D). Loosen the lock bolt on the back of Hinge Base for an easy fit. Align and insert

the “U” slot on Hinge Arm under the lock bolt head on the back of Hinge Base. Make sure that both

door hinges engage and function properly. Tighten the bolt on the hinge base to lock the hinges in place.

17. Repeat the last step to attach the other Door Panel (G) to the Left Side Panel (C).

18. Open and close the Door Panels (G) to make sure it is aligned and shuts correctly. If necessary, adjust

the screws for a good fit.

Gx 2

Model # SPCA-LHTC

Please call for replacement parts or assistance: 1-866-942-5362

Whalen Furniture Mfg., Inc. Page 8 Factory No. 16015

Assembly Instructions

19. Attach the Handles (13) to the outside of Door Panels (G) with the provided Handle Bolts (14).

20. Stick one Rubber Pad (9) at the upper corner of each Door Panel (G) where the installed Door Stopper

(10) will hit. As shown below.

21. Plug the Cam Lock Covers (7 and 8) onto the visible Cams Locks to conceal the Cam Locks. Four Cam

Lock Covers with Rod (8) need to be used on both Side Panels (C and D), as shown.

22. Insert the Shelf Pins (6) into the desired holes in the sides of upper compartments. Make sure you place

the 4 Shelf Pins in the same level so the shelf is not tilted. Tilt and rest the Adjustable Shelves (H and I)

onto the Shelf Pins (6) making sure the end notches of the each shelf fit onto the Shelf Pins properly.

Model # SPCA-LHTC

Please call for replacement parts or assistance: 1-866-942-5362

Whalen Furniture Mfg., Inc. Page 9 Factory No. 16015

Assembly Instructions

23. With the help of your assistant, carefully position the assembled Hutch on the top of the desk to prevent

scratching. Make sure it is centered properly and the back ends are even with each other.

24. Using the Metal Bracket (11) as a template, mark the mounting hole locations at the back side of the Desk

Top Panel and Hutch Side Panels, as shown in the illustration. With an electric drill and 1/16” drill bit (not

included), carefully drill into the marked location about 1/2” deep. Make sure that you will not crack the

side edges.

25. To secure the units in place, attach the Metal Brackets (11) over the drilled holes using four 5/8” Screws (5)

per Metal Bracket. Tightly fasten all the screws with a Phillips screwdriver.

Model # SPCA-LHTC

Please call for replacement parts or assistance: 1-866-942-5362

Whalen Furniture Mfg., Inc. Page 10 Factory No. 16015

Assembly Instructions

26. Ask for assistance to position the assembled unit at the desired location against a wall.

27. Now, follow the instructions printed on the plastic bag containing the Tipping Restraint Hardware to

attach the tip-over restraints to the unit and the wall. As shown in the illustration.

NOTE: Young children can be seriously injured by tipping furniture. You must install the

Tipping Restraint Hardware with the unit to prevent the unit from tipping, causing any

accidents or damage. The tipping restraints are intended only as a deterrent, they are not a

substitute for proper adult supervision. The tipping restraints are not earthquake restraints. If

you wish to add the extra security of earthquake restraints, they must be purchased and

installed separately.

Tools required: Phillips screwdriver, Power Drill, 3/8” Drill Bit and Rubber Mallet.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Whalen Inneneinrichtung Handbücher

Whalen

Whalen AVC-22E Bedienungsanleitung

Whalen

Whalen Barkston SPLS-BKLF Bedienungsanleitung

Whalen

Whalen Astoria WC-459 Bedienungsanleitung

Whalen

Whalen Hendricks Series Bedienungsanleitung

Whalen

Whalen BBAVT27-MBC Bedienungsanleitung

Whalen

Whalen 72'' Industrial Metal and Wood Cabinet Bedienungsanleitung

Whalen

Whalen Bayside Furnishing 1644994 Bedienungsanleitung

Whalen

Whalen Asherton File SPUS-ASHF Bedienungsanleitung

Whalen

Whalen BJAVCL65 Bedienungsanleitung

Whalen

Whalen LEVELUP GS-BF16R-B Bedienungsanleitung

Whalen

Whalen Shelby 60in Bedienungsanleitung

Whalen

Whalen Keaton Series Bedienungsanleitung

Whalen

Whalen Bayside CUS60AC-1 Bedienungsanleitung

Whalen

Whalen O'nin Espresso Room Divider Bedienungsanleitung

Whalen

Whalen CSCDHBST-4E Bedienungsanleitung

Whalen

Whalen Luke Twin over Twin Loft Bunk Bed with Desk Bedienungsanleitung

Whalen

Whalen SPLS-TU48CD Bedienungsanleitung

Whalen

Whalen Barkston Lane Desk with Hutch Bedienungsanleitung

Whalen

Whalen Kendal Chair Gray Bedienungsanleitung

Whalen

Whalen Bayside CSC72TC-10 Bedienungsanleitung

Whalen

Whalen WF24HVO Bedienungsanleitung

Whalen

Whalen MainStays Parsons Bedienungsanleitung

Whalen

Whalen Devon File EC-DEDF Bedienungsanleitung

Whalen

Whalen LWS30DCVAG Bedienungsanleitung

Beliebte Inneneinrichtung Handbücher anderer Marken

Homelegance

Homelegance California 1662PEK-1CK Bedienungsanleitung

Osmond Ergonomics

Osmond Ergonomics FLO Bedienungsanleitung

OVE

OVE ELOISE 42 Bedienungsanleitung

overstock

overstock MF286255 Bedienungsanleitung

Sonoma

Sonoma 160-801 Bedienungsanleitung

BOLERO

BOLERO Wicker Side Chair CF158 Installationsanleitung

Coaster

Coaster 4799N Bedienungsanleitung

Stor-It-All

Stor-It-All WS39MP Programmierhandbuch

Lexicon

Lexicon 194840161868 Bedienungsanleitung

Next AMELIA NEW 462947 Bedienungsanleitung

impekk

impekk Manual II Bedienungsanleitung

Elements

Elements Ember Nightstand CEB700NSE Bedienungsanleitung

JWA

JWA CARY 68429 Bedienungsanleitung

VIPACK

VIPACK AMORI AMKB9014 Bedienungsanleitung

Rowico

Rowico SANNA Bedienungsanleitung

Southern Enterprises

Southern Enterprises CK556000TX Bedienungsanleitung

hygena

hygena 314/5041 Bedienungsanleitung

VINNOVA

VINNOVA Kinsley 536060S Bedienungsanleitung