Whalen Barkston SPLS-BKLF Bedienungsanleitung

THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION.

PLEASE READ AND KEEP FOR FUTURE REFERENCE.

Date 2016-04-28 Rev. 0001-A Factory: DOGULU

Barkston Lane File

Model # SPLS-BKLF

ADULT ASSEMBLY REQUIRED

If you have any questions regarding assembly or if parts are missing, DO NOT return this item to the

store where it was purchased. Please call our toll-free customer service number and have your

instructions and parts list ready to provide the model name, part name or factory number:

1-866-942-5362

Pacific Standard Time: 8:30 a.m. - 4:30 p.m., Monday - Friday

Or visit our web site 24 hours a day, 7 days a week for product assistance at

www.whalenfurniture.com

Or e-mail your request to parts@whalenfurniture.com

LOT NUMBER:

DATE PURCHASE

Model # SPLS-BKLF

MANUFACTURER: Whalen Furniture Manufacturing

CATALOG: Barkston Lane File (SPLS-BKLF)

MADE IN CHINA

SPECIAL NOTE

Please read the instruction sheets completely before assembly. Examine all packaging

material before discarding carton. Remove any remaining staples from the carton before

discarding. Remove all parts from carton and separate into groups as indicated on part

list. Please ensure all parts are included prior to assembly. Use of power tools to

complete assembly is not recommended.

MAXIMUM RECOMMENDED WEIGHT LOADS

THIS UNIT IS INTENDED FOR USE ONLY WITH THE MAXIMUM

WEIGHTS INDICATED. USE WITH LOAD HEAVIER THAN THE MAXIMUM

WEIGHTS INDICATED MAY RESULT IN INSTABILITY, CAUSING POSSIBLE INJURY.

MAXIMUM LOAD 30 lb. (13.6 kg)

MAXIMUM LOAD 100 lb. (45.3 kg)

Model # SPLS-BKLF

Important

Before you begin: Open, identify and count all parts prior to assembly. Lay out parts on a flat and non-

abrasive surface. You will need the parts identified on page 4 and 5 of this instruction manual.

NOTE: IT IS VERY IMPORTANT TO USE GLUE WITH DOWELS. EXCESS GLUE CAN BE WIPED

OFF WITH DAMP CLOTH.

Insert Dowel at least half way by tapping lightly with a rubber mallet IF NECESSARY.

CAM LOCK SYSTEM OPERATION

HOW THE KNOCK DOWN (KD) ASSEMBLY SYSTEM WORKS

1. Screw Cam Bolt into the pre-drilled small holes on panel. Connect both panels together; making

sure Cam Bolt goes into pre-drilled hole on the end of panel with Cam Lock.

2. Insert Cam Lock into pre-drilled large hole on panel. Make sure arrow on Cam Lock is pointed toward

Cam Bolt.

3. Once Cam Bolt is connected inside Cam Lock, take a Phillips screwdriver and tighten Cam Lock clockwise.

4. Plug Cam Cap into the cross slot of the Cam Locks to conceal the cam.

You are now ready to assemble the unit.

FINAL

1 2 43

Model # SPLS-BKLF

Parts and Hardware List

Please read completely through the instructions and verify that all listed parts and hardware are present

before beginning assembly.

A- Top Panel (1) B-

Fixed Shelf

(1) C- Side Panel (2)

D- Back Panel (1)

E- Slides Support (2) F- Top

Crossbar (1)

G- Bottom

Crossbar (1)

H- Bottom Stretcher (1) I- Left Front Leg (1)

J- Right Front Leg (1)

KL/KR- Rear Leg (2) L- Drawer Front (1)

M- Drawer Left Side (1) N- Drawer Right Side (1) O- Drawer Back Panel (1)

P- Drawer Bottom Panel (1) Q- Ball Bearing Slides (2 sets)

R- Guide Rail (2)

Model # SPLS-BKLF

Parts and Hardware List

Please read completely through the instructions and verify that all listed parts and hardware are present

before beginning assembly.

(1) Small Cam Lock (2) Large Cam Lock (3) Small Cam Bolt

(4+1 extra) (26+1 extra) (4+1 extra)

(4) Large Cam Bolt

(5) Small Wood Dowel

(6) Large Wood Dowel

(26+1 extra) (6+1 extra) (28+1 extra)

(7) Ø3.5 mm x 12 mm

Screw

(8) Ø4 mm x 25 mm

Screw

(9) Ø5 mm x 38 mm

Screw

(12+1 extra) (8+1 extra) (6+1 extra)

(10) Knob (2) (11) 25 mm Knob Bolt (2) (12) Cam Lock Cover (12+1 extra)

Glue (1)

Tools required: Phillips screwdriver and hammer (not provided).

Model # SPLS-BKLF

File Drawer Assembling

1. Unpack the unit and confirm that you have all the hardware and required parts. Assemble the unit on a

carpeted floor or the empty carton to avoid any scratch.

2. Pick up the Ball Bearing Slides (Q) and separate the Slide Runners for the following steps. Extend the

Slide Runner all the way forward. Press the plastic release lever of the ball bearing slides up and pull

the Slide Runner complete out.

3. Attach the separated Slide Runners (Q) to the Drawer Side Panels (M and N) respectively with three 12

mm Screws (7) per slide runner. Make sure that the slide opening points towards the edge with

countersunk holes.

4. Securely screw four Small Cam Bolts (3) into the designated small holes on the Drawer Front (L) as

shown in the illustration.

5. Attach and align the Drawer Side Panels (M and N) to the Drawer Front (L) using four Small Cam

Locks (1) (Refer to page 3 on Cam Lock system operation supplement). As shown.

M/N

Model # SPLS-BKLF

File Drawer Assembling

6. Slide the Drawer Bottom Panel (P) into the grooves between the Drawer Side Panels (M and N) until

fully inserted into the Drawer Front (L). Make sure that the finished surface will face up.

7. Fasten the Drawer Back Panel (O) to the Drawer Side Panels (M and N) using four 38 mm

Screw

s (9).

Make sure that Drawer Bottom Panel (P) fits securely into the groove of the Drawer Back Panel (O).

Tighten all the screws with a Phillips screwdriver.

Model # SPLS-BKLF

Assembly Instructions

8. Turn the assembled drawer upright. Attach the Knobs (10) to the front side of drawer using the provided

Knob Bolts (11) by a Phillips screwdriver.

9. Fit two Guide Rails (R) onto the File Drawer Side Panels (M and N) with the high side facing inward.

M/N

Model # SPLS-BKLF

Assembly Instructions

10. Securely screw the Large Cam Bolts (4) into the designated small holes on the Side Panels (C) and Legs

(I, J, KL and KR) as shown.

11. Glue four Large Wood Dowels (6) into the inner holes of one Side Panel (C) at both ends. Attach the

Side Panel (C) between the Left Front Leg (I) and Left Rear Leg (KL) using four Large Cam Locks (2).

12. Repeat last step to combine the Right Front Leg (J) and Right Rear Leg (KR) together.

Model # SPLS-BKLF

Assembly Instructions

13. Glue two Small Wood Dowels (5) into the inner holes on one Slides Support (E) and attach it to each

Side Panel (C) with three 25 mm Screws (8). Make sure that

the end pilot holes are against the Front

Legs (I and J).

14. With the pilot holes as a guide, attach the separated Slide Tracks (Q) to the Slides Supports (E) on the

Side Panels (C) respectively, using three 12 mm Screws (7) per slide track. Make sure that the slide

opening faces the front of the unit.

Inhaltsverzeichnis

Sprachen:

Andere Whalen Inneneinrichtung Handbücher

Whalen

Whalen Dulzura SPUS-DZMF-LBM Bedienungsanleitung

Whalen

Whalen Wesleyan Drop Lid Secretary Bedienungsanleitung

Whalen

Whalen WSZB244872-SV5MS Bedienungsanleitung

Whalen

Whalen WS-NIR-722484-5S Bedienungsanleitung

Whalen

Whalen Bayside CUS4PCHD-1PC Bedienungsanleitung

Whalen

Whalen MLCRD Bedienungsanleitung

Whalen

Whalen Tavia ECOM-TA30BK Bedienungsanleitung

Whalen

Whalen WHA-10005 Bedienungsanleitung

Whalen

Whalen Jaxon 3-in-1 XL-27 Bedienungsanleitung

Whalen

Whalen WF60AVG Bedienungsanleitung

Whalen

Whalen JCS110605-D Bedienungsanleitung

Whalen

Whalen WSLW48IFV Bedienungsanleitung

Whalen

Whalen WF36FVB Bedienungsanleitung

Whalen

Whalen Z BEAM WSZB1848-5BW-2 Bedienungsanleitung

Whalen

Whalen Victory VIC7PD-S Bedienungsanleitung

Whalen

Whalen Bayside Furnishings CUSWMB-1 Bedienungsanleitung

Whalen

Whalen Montreal Laptop Desk Bedienungsanleitung

Whalen

Whalen BBAVT27-MBC Bedienungsanleitung

Whalen

Whalen AVCBEC60-SMB Bedienungsanleitung

Whalen

Whalen Jasper Chrome & Glass Desk Bedienungsanleitung

Whalen

Whalen Laminate 44" High Console Bedienungsanleitung

Whalen

Whalen Springfield SPLS-SPMDBK-HW Bedienungsanleitung

Whalen

Whalen LEVELUP GS-BF16R-B Bedienungsanleitung

Whalen

Whalen Industrial Metal and Wood Tool Cart Bedienungsanleitung

Beliebte Inneneinrichtung Handbücher anderer Marken

Homelegance

Homelegance California 1662PEK-1CK Bedienungsanleitung

Osmond Ergonomics

Osmond Ergonomics FLO Bedienungsanleitung

OVE

OVE ELOISE 42 Bedienungsanleitung

overstock

overstock MF286255 Bedienungsanleitung

Sonoma

Sonoma 160-801 Bedienungsanleitung

BOLERO

BOLERO Wicker Side Chair CF158 Installationsanleitung

Coaster

Coaster 4799N Bedienungsanleitung

Stor-It-All

Stor-It-All WS39MP Programmierhandbuch

Lexicon

Lexicon 194840161868 Bedienungsanleitung

Next AMELIA NEW 462947 Bedienungsanleitung

impekk

impekk Manual II Bedienungsanleitung

Elements

Elements Ember Nightstand CEB700NSE Bedienungsanleitung

JWA

JWA CARY 68429 Bedienungsanleitung

VIPACK

VIPACK AMORI AMKB9014 Bedienungsanleitung

Rowico

Rowico SANNA Bedienungsanleitung

Southern Enterprises

Southern Enterprises CK556000TX Bedienungsanleitung

hygena

hygena 314/5041 Bedienungsanleitung

VINNOVA

VINNOVA Kinsley 536060S Bedienungsanleitung