Whalen LEVELUP SPLS-LTCGD Bedienungsanleitung

THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION.

PLEASE READ AND KEEP FOR FUTURE REFERENCE.

Leet Corner Gaming Desk

Model # SPLS-LTCGD

ADULT ASSEMBLY REQUIRED DUE TO THE PRESENCE OF SMALL PARTS, SHARP

POINTS, SHARP EDGES AS RECEIVED

If you have any questions regarding assembly or if parts are missing, DO NOT return this item to the

store where it was purchased. Please call our toll-free customer service number and have your

instructions and parts list ready to provide the model name, part name or factory number:

1-866-942-5362

Pacific Standard Time: 8:30 a.m. - 4:30 p.m., Monday - Friday

Or visit our web site 24 hours a day, 7 days a week for product assistance at

www.whalenfurniture.com

Or e-mail your request to parts@whalenfurniture.com

LOT NUMBER:

DATE PURCHASED: / /

Date 2021-03-02 Rev. 0001-A

MANUFACTURER: Whalen Furniture Manufacturing

CATALOG: Leet Corner Gaming Desk

MODEL # SPLS-LTCGD

CAM LOCK SYSTEM OPERATION

HOW THE KNOCK DOWN (KD) ASSEMBLY SYSTEM WORKS

1. Screw the Cam Bolt into the pre-drilled small holes on the panel. Connect both panels together; making sure

the Cam Bolt goes into the pre-drilled hole at the end of the panel with the Cam Lock.

2. Insert the Cam Lock into the pre-drilled large hole in the panel. Make sure the arrow on the Cam Lock is

pointed towards the Cam Bolt.

3. Once the Cam Bolt is connected inside the Cam Lock, take a Phillips screwdriver (not included) and

tighten the Cam Lock clockwise.

You are now ready to assemble the KD unit.

MAXIMUM RECOMMENDED WEIGHT LOADS

THIS UNIT IS INTENDED ONLY FOR USE WITHIN THE MAXIMUM

WEIGHTS INDICATED. USE WITH LOAD HEAVIER THAN THE MAXIMUM WEIGHTS

INDICATED MAY RESULT IN INSTABILITY, CAUSING POSSIBLE INJURY.

1234

MAXIMUM LOAD 50 lb. (22.7 kg)

MAXIMUM LOAD 200 lb. (90.7 kg)

MAXIMUM LOAD 50 lb. (22.7 kg)

Low Voltage Lighting Systems User Guide

Please read this user guide before installing and using your Low Voltage Lighting Systems

1．THE COMPONENTS LIST

1> Class 2 power supply----1pc;

2> RF control---1pc;

3> LED control box---1pc;

4> LED lighting---1pc；

5> Wireless Charger---1pc;

6> Buckle---2pcs;

2．INSTALLATION

1>Screw the buckles onto the top of furniture;

2>Clip the LED light bar into the buckles;

3>Screw the LED controller on furniture, the controller can’t be installed in closed metal parts;

4>Connect the connecting line between the parts;

5>Insert the Power supply plug to the socket;

6>Operate the Remote control to control the light bar (pull out the battery insulation before use).

3．SPECIFICATIONS

⚫Power supply: Input: 100-240VAC 50/60HZ Output:12V, 2A

⚫LED lighting: Input: DC 12V Power: Max. 8W

⚫Wireless Charger: Input:5V Power:5W

4．RF wireless Remote RGB LED Controller Instructions

22 Dynamic Modes

Card Type RF Remote

20 Static Colors

Ultra Slim Design

Very Smooth Effects

Dynamic Demo Mode

Speed Adjustable

Easy Remote Pairing

Brightness Adjustable

Direct Color Selecting

Functions

1.Turn On/Standby

Press this key to turn on unit or switch to standby mode. At power

on. Unit will automatically turn on and restore to previous status.

2/9.Dynamic Mode Adjust

Switch to dynamic mode from static color, or switch between

dynamic modes.

3/10.Dynamic Speed Adjust

Adjust dynamic playing speed. Press SPEED+ to increase speed

and press SPEED- to decrease. The unit will switch to dynamic

mode if press this key at static color mode.

4/5.Static Color Adjust

Switch to static color mode from dynamic mode, or switch

between static colors.

6.Direct Color Select

Shortcut key to static colors. When press the specific color

key, LED will play the same static color. The direct colors

are included in ‘COLOR+’and ‘COLOR-’operation.

7/8.Brightness Adjust

Adjust static color brightness, press BRIGHT+ to increase

brightness and press BRIGHT- to decrease.

11.Demo Mode

Press this key will switch to Demo mode. At demo mode, it

plays red green and blue color dynamic modes in loop.

5VDC 2.0A

Connect to wireless

charger

Connect to LED

lighting

Connect to power supply

MODE

SPEED

MODE

SPEED

BRIGHT

COLOR

BRIGHT

DEMO

COLOR

RF Wireless

MODE

SPEED

MODE

SPEED

BRIGHT

COLOR

BRIGHT

DEMO

COLOR

RF Wireless

Operation

1.Using Remote Controller

Please pull out the battery insulate tape before using. The RF

wireless remote signal can pass through barrier, so it’s not

necessary to aim at the main unit when operating.

For proper receiving remote signal, please do not install the

main unit in closed metal parts.

2.Pairing New Remote

The remote and main unit is 1 to 1 paired as default. Further

more, main unit can be paired to 3 remote controllers and

each remote controller can be paired to any main unit.

Please do the following steps to pair new remote controller:

1) Plug off the power of main unit and plug in after 5 seconds.

2) Press ‘SPEED-’and ‘SPEED+’ key together in 5 seconds

after power on.

After this operation, the main unit will recognize the new

remote controller.

Warning: This action cannot be undone!

3.Free Remote Pairing Mode

In some specific cases; the main unit may need to be paired

to any remote controllers, please do following steps for free

Remote pairing mode:

1) Plug off the power of main unit and plug in after 5 seconds.

2) Press ‘ON/OFF’ and ‘MODE+’ key together in 5 seconds

after this operation, the main unit will recognize any

remote controller, to pair the main unit back to specific

remote, please repeat the ‘Pairing New Remote’ operation.

4.Switch Output Color Sequence

The controller’s default output signal sequence is

Common-Green-Red-Blue. If the LED application is in different

cable sequence, the direct color keys will not match the LED

color. In this case, user can adjust the output signal sequence

With following steps;

1) Plug off the power of main unit and plug in after 5 seconds,

2) Press ‘RED’ and ‘BLUE’ color key together in 5 seconds after

power on.

With this operation, the output sequence will switch between

6 possible combinations, the sequence will be memorized

and it won’t change before next same operation.

Specification

Dynamic mode

22 modes

Static Color

20 colors

PWM Grade

256 levels

Brightness Grade

5 levels

Speed Grade

10 levels

Demo mode

Yes

Direct Color Switchable

Yes

Output Color Switchable

Yes,6 options

Working Voltage

DC 5-24V

Output Current

3×4A peak,3×2A constant

Remote frequency

433.92MHz

Remote distance

<=6m at open area

5. WARNINGS

1> Don’t connect to non-original power supply;

2> Please install follow installation instruction to avoid damage;

3> Indoor use only, working ambient temperature 4°C to 36°C;

4> Dry location use only;

5> Prevent children or animals from chewing or swallowing parts;

6> Return to the dealer for repair service if abnormal, instead of dismantle;

7> Do not install the LED controller in closed metal parts;

OPEN

PUSH

RELEASE

CR2025

LITHIUM BATTERY

Pull out the battery insulation

Wireless charger operation manual

First of all, thanks sincerely for buying this product.

For your safely, please read this manual carefully before using this product.

The first: To protect people from harm and property loss, we make a clear explanation

on what you do should obey:

A. Warning! There are concerning the possibilities of death and severe wound: People who

use heart-birth-maker should consult your doctor before you use this product; And please

leave it at a distance of 50cm from the place where you install your heart-birth-maker, the

electromagnetic wave have influence on heart- birth-maker's work.

B. Attention! It may led to heat, fire and electric shock:

1) Do not put it into water or any other liquid, Do not make it wet;

2) Do not pull the AC adapter out with wet hands, ensure the safety and integrity of

the adapter;

3) Do not let the dust or other things accumulate on the product and the AC adapter;

4) Do not use the product outside the temperature-20 ℃to 40 ℃;

5) Do not charge in places where the sunshine directly or with high temperature;

6) Do not use this product in places that are easy to fall, so as not break;

7) Do not lay the magnetic card, magnetic record media and precise machine too close

to the protect;

8) Do not decompose and remold;

9) Do not lay anything between the non-connection charging pad and the charging machine;

10) Can not bring cell phone case / shell charge;

11) Do not surpass the rated value when using the plug and other wiring layout;

12) Do not make any breakage on the AC adapter, please make sure you connect the

AC adapter fully and take the AC adapter off the plug when it's not used;

13) Do not use travel converter;

14) Please teach your children, the let them use.

The second: Product advantages

1) The product is of high sensitivity, intelligent recognition, put a charge;

After charging, automatically enter standby mode of the product;

2) Charge for all QI compliant product;

3) Efficiency can reach more than 70%, less heat;

4) In the process of charging can be free to pick up, answer the phone, freeing discharge or

charge;

The third wireless charger’s charging method

1) Please connect the product to the AC adapter, red light is on, enters the standby status;

2) Please lay the charge device directly on this product label indicating area (without direction),

green light is on, enters the charging status;

3) When the charging equipment complete, can be taken away; red light is on again, enters

the standby status.

The fourth: product features

1> Main functions: wireless charging transmitter;

2>Standard version: WPC-1.2.3;

3>Products applicable: all wireless charging equipment accorded with QI standard;

4>Charging type: one-on-one charge corresponding area;

5>The input voltage: DC:5V/2A;

6>Output: DC 5V 1000MA;

7>Launch distance:4 to 6 mm;

8>Conversion efficiency:≧70%;

9>Charging methods: induction model;

10>Working frequency:110-205 KHz;

11>Accessories/components name: Wireless charging pad, AC adapter.

This device complies with part 15 of the FCC rules and Industry Canada license-exempt

RSS standard(s). Operation is subject to the following two conditions: (1) this device

may not cause harmful interference, and (2) this device must accept any interference

received, including interference that may cause undesired operation.

Installing the battery

The battery is supplied with the remote control. The first thing to do with the remote control is to remove the plastic

sheet insulated the battery. For replacement battery, use lithium-based CR2025 battery. Please follow the sequence

below to replace the battery.

□Take out the battery bracket.

□Insert the battery with the button side into the battery bracket, making sure the battery is firmly seated.

□Press the battery bracket into the remote control, making sure it snaps into position.

□Turn the remote over and aim it towards the lighting systems unit.

□If nothing appears to happen, check to make sure the battery is installed correctly, and try again.

WARNING:Do not ingest batteries.

1. Non-rechargeable batteries are not to be recharged.

2. Batteries are to be inserted with the correct polarity.

3. Exhausted batteries are to be removed from the product.

4. Always purchase the correct size and grade of battery most suitable for the intended use.

5. Replace all batteries of a set at the same time.

6. Clean the battery contacts and also those of the device prior to battery installation.

7. Remove batteries from equipment with is not to be used for an extended period of time.

NOTE:

Battery disposal

Please always dispose

of batteries at a

suitable recycling

point.

OPEN

PUSH

RELEASE

OPEN

PUSH

RELEASE

OPEN

PUSH

CR2025

LITHIUM BATTERY

RELEASE

OPEN

PUSH

Parts and Hardware List

Please read completely through the instructions and verify that all listed parts and hardware are present

before beginning assembly.

A- Left Top Frame (Qty. 1) B- Corner Top Frame (Qty. 1) C- Right Top Frame (Qty. 1)

D- Left Outer Frame (Qty. 1) E- Left Middle Frame (Qty. 1) F- Right Side Frame (Qty. 1)

G- Hutch Top (Qty. 1) H- Left Back Short Stretcher (Qty. 1) I- Left Back Long Stretcher (Qty. 1)

J- Middle Back Stretcher (Qty. 1) K- Right Back Stretcher (Qty. 1) L- Corner Left Post (Qty. 1)

M- Corner Right Post (Qty. 1) N- Left Cord Management (Qty. 1) O- Right Cord Management (Qty. 1)

P- Middle Cord Management (Qty. 1) Q- Light Support (Qty. 1) R- Accessory Hook (Qty. 1)

S- Corner Mouse Pad (Qty. 1) T- Corner Front Top Panel (Qty. 1) U- Corner Back Top Panel (Qty. 1)

V- Left Bottom Panel (Qty. 1) W- Right Inner Panel (Qty. 1) X- Right Shelf (Qty. 2)

Parts and Hardware List

Please read completely through the instructions and verify that all listed parts and hardware are present

before beginning assembly.

Y- Plug of Light Fixture with

Remote Control and Battery (Qty. 1) Z- Wireless Charger (Qty. 1)

(1) 1/4”x 12 mm Bolt (2) 1/4”x 25 mm Bolt (3) 1/4”x 32 mm Bolt

(Qty. 36+1 extra) (Qty. 4+1 extra) (Qty. 10+1 extra)

(4) Lock Washer (5) Flat Washer (6) Hex Nut

(Qty. 28+1 extra) (Qty. 28+1 extra) (Qty. 2+1 extra)

(7) Cam Lock (8) Cam Tapping Bolt (9) Cam Bolt

(Qty. 7+1 extra) (Qty. 4+1 extra) (Qty. 3+1 extra)

(10) M8 x 30 mm Wood Dowel (11) M3.5 x 12 mm Screw (12) M4 x 25 mm Screw

(Qty. 4+1 extra) (Qty. 18+1 extra) (Qty. 10+1 extra)

(13) Metal Bracket (Qty. 1) (14) Cord Clip (Qty. 2)

Tools required: Allen wrench (provided) and Phillips screwdriver (not provided).

MODE

SPEED

MODE

SPEED

BRIGHT

COLOR

BRIGHT

DEMO

COLOR

RF Wireless

(15) Cup Holder (Qty. 1) Allen Wrench (Qty. 2)

543

Left Side Desk Assembling

NOTE: Please do not fully tighten all bolts until you finish assembling all parts. Once assembled, go back

and fully tighten all bolts. This will make the assembly easier.

1. Unpack the unit and confirm that you have all the hardware and required parts. Assemble the unit on a

carpeted floor or the empty carton to avoid any scratch.

2. Attach the Left Outer Frame (D) to the Left Top Frame (A) with two 32 mm Bolts (3) and two

Washers (4 and 5).

3. Attach the Left Middle Frame (E) to the Left Top Frame (A) with four 12 mm Bolts (1) and four

Washers (4 and 5).

Inhaltsverzeichnis

Andere Whalen Inneneinrichtung Handbücher

Whalen

Whalen WHA-10005 Bedienungsanleitung

Whalen

Whalen WSC72-MW Bedienungsanleitung

Whalen

Whalen Huntingdon EC-HUDF Bedienungsanleitung

Whalen

Whalen BBAVT27-MBC Bedienungsanleitung

Whalen

Whalen Sagemoor SAGE7PD-E Bedienungsanleitung

Whalen

Whalen STCA48GD Bedienungsanleitung

Whalen

Whalen BBAVT27-MBC Bedienungsanleitung

Whalen

Whalen PAL70ECON Bedienungsanleitung

Whalen

Whalen Asher Series Bedienungsanleitung

Whalen

Whalen Bayside FURNISHINGS CSC7PD-8-2PC Bedienungsanleitung

Whalen

Whalen WMCPRO-6 Bedienungsanleitung

Whalen

Whalen LEVELUP GS-BF16R-B Bedienungsanleitung

Whalen

Whalen Z BEAM WSZB1848-5BW-2 Bedienungsanleitung

Whalen

Whalen WSCSC6172WB Bedienungsanleitung

Whalen

Whalen LWS60DCVAG Bedienungsanleitung

Whalen

Whalen AVCBEC60-SMB Bedienungsanleitung

Whalen

Whalen Hendricks Series Bedienungsanleitung

Whalen

Whalen Bayside CSC72LC-1 Bedienungsanleitung

Whalen

Whalen 48IN VANITY Bedienungsanleitung

Whalen

Whalen WSLPWS Bedienungsanleitung

Whalen

Whalen WF36FVB Bedienungsanleitung

Whalen

Whalen Bayside CSCGLBST-4-UK-BL Bedienungsanleitung

Whalen

Whalen AVCEC65-TC Bedienungsanleitung

Whalen

Whalen Legeant Bookcase Bedienungsanleitung

Beliebte Inneneinrichtung Handbücher anderer Marken

Homelegance

Homelegance California 1662PEK-1CK Bedienungsanleitung

Osmond Ergonomics

Osmond Ergonomics FLO Bedienungsanleitung

OVE

OVE ELOISE 42 Bedienungsanleitung

overstock

overstock MF286255 Bedienungsanleitung

Sonoma

Sonoma 160-801 Bedienungsanleitung

BOLERO

BOLERO Wicker Side Chair CF158 Installationsanleitung

Coaster

Coaster 4799N Bedienungsanleitung

Stor-It-All

Stor-It-All WS39MP Programmierhandbuch

Lexicon

Lexicon 194840161868 Bedienungsanleitung

Next AMELIA NEW 462947 Bedienungsanleitung

impekk

impekk Manual II Bedienungsanleitung

Elements

Elements Ember Nightstand CEB700NSE Bedienungsanleitung

JWA

JWA CARY 68429 Bedienungsanleitung

VIPACK

VIPACK AMORI AMKB9014 Bedienungsanleitung

Rowico

Rowico SANNA Bedienungsanleitung

Southern Enterprises

Southern Enterprises CK556000TX Bedienungsanleitung

hygena

hygena 314/5041 Bedienungsanleitung

VINNOVA

VINNOVA Kinsley 536060S Bedienungsanleitung