Whalen Huntingdon EC-HUDF Bedienungsanleitung

THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION.

PLEASE READ AND KEEP FOR FUTURE REFERENCE.

Date 2021-11-23 Rev. 0001-A

Huntingdon File

Model # EC-HUDF

ADULT ASSEMBLY REQUIRED

If you have any questions regarding assembly or if parts are missing, DO NOT return this item to the

store where it was purchased. Please call our toll-free customer service number and have your

instructions and parts list ready to provide the model name, part name or factory number:

1-866-942-5362

Pacific Standard Time: 8:30 a.m. - 4:30 p.m., Monday - Friday

Or visit our web site 24 hours a day, 7 days a week for product assistance at

www.whalenfurniture.com

Or e-mail your request to parts@whalenfurniture.com

LOT NUMBER: DATE PURCHASED: / /

MANUFACTURER: Whalen Furniture Manufacturing

CATALOG: Huntingdon File

MODEL # EC-HUDF

SPECIAL NOTE

Please read the instruction sheets completely before assembly. Examine all packaging

material before discarding carton. Remove any remaining staples from the carton before

discarding. Remove all parts from carton and separate into groups as indicated on part list.

Please ensure all parts are included prior to assembly. Use of power tools to complete

assembly is not recommended.

A X I M U M R E

C O M M E N D E D W E I G H T L O A D S

MAXIMUM LOAD 13.6 kg / 30 lb

MAXIMUM LOAD 22.7 kg / 50 lb

MAXIMUM LOAD 4.5 kg / 10 lb

THIS UNIT IS INTENDED ONLY FOR USE WITHIN THE MAXIMUM

WEIGHTS INDICATED. USE WITH LOAD HEAVIER THAN THE MAXIMUM WEIGHTS

INDICATED MAY RESULT IN INSTABILITY, CAUSING POSSIBLE INJURY.

IMPORTANT

Before you begin: Open, identify and count all parts prior to assembly. Lay out parts on a flat and

non-abrasive surface. You will need the parts identified on pages 5 and 6 of this instruction manuals.

NOTE: IT IS VERY IMPORTANT TO USE GLUE WITH DOWELS. EXCESS GLUE CAN BE WIPED

OFF WITH DAMP CLOTH.

Insert the dowel at least half way by tapping lightly with a rubber mallet, IF NECESSARY.

CAM LOCK SYSTEM OPERATION

HOW THE KNOCK DOWN (KD) ASSEMBLY SYSTEM WORKS

1. Screw the Cam Bolt into the threaded inserts on the panel. Connect both panels together; making sure Cam

Bolt goes into the pre-drilled hole on the end of panel for Cam Lock.

2. Insert the Cam Lock into the pre-drilled large hole on the panel. Make sure the arrow on the face of Cam

Lock faces out and points towards Cam Bolt.

3. Take a Phillips screwdriver and rotate the Cam Lock clockwise to lock the Cam Bolt in place.

You are now ready to assemble the KD unit.

123

GLUE

FINAL

1 2 43

FURNITURE TIPPING RESTRAINT

YOUNG CHILDREN MAY BE INJURED BY TIPPING FURNITURE AND YOU MUST

USE THIS TIPPING RESTRAINT TO ATTACH THIS UNIT TO THE WALL, TO

PREVENT ACCIDENTS AND/OR INJURIES.

THIS HARDWARE MUST BE PROPERLY INSTALLED (FOLLOW ALL

DIRECTIONS IN ORDER ON THIS INSTRUCTIONS), TO PROVIDE PROTECTION

AGAINST THE UNEXPECTED TIPPING OF FURNITURE DUE TO IMPROPER USE.

THIS PRODUCT IS ONLY A DETERRENT. IT IS NOT A SUBSTITUTE FOR PROPER

ADULT SUPERVISION. USE OF TIP-OVER RESTRAINTS MAY ONLY REDUCE,

BUT NOT ELIMINATE, THE RISK OF TIP-OVER.

Children have died from furniture tipover.

To reduce the risk of furniture tipover:

 ALWAYS install tipover restraint provided.

 NEVER put a TV on this product.

 NEVER allow children to stand, climb or hang

on drawers, doors, or shelves.

 NEVER open more than one drawer at a time.

 Place heaviest items in the lowest drawers.

Use of tip-over restraints may only reduce,

but not eliminate, the risk of tip-over.

WARNING

Parts and Hardware List

Please read completely through the instructions and verify that all listed parts and hardware are present

before beginning assembly.

A- Top Panel (Qty. 1) B- Left Side Frame (Qty. 1) C- Right Side Frame (Qty. 1)

D- Back Panel (Qty. 1) E- Bottom Panel (Qty. 1) F- Top Stretcher (Qty. 1)

G- Crossbar H- Bottom Stretcher I- Utility Drawer Front Panel

(Qty. 1) (Qty. 1) (Qty. 1)

J- Utility Drawer Back Panel K- Utility Drawer Left Side L- Utility Drawer Right Side

(Qty. 1) (Qty. 1) (Qty. 1)

M- Utility Drawer Bottom Panel N- File Drawer Front Panel O- File Drawer Back Panel

(Qty. 1) (Qty. 1) (Qty. 1)

P- File Drawer Left Side Q- File Drawer Right Side R- File Drawer Bottom Panel

(Qty. 1) (Qty. 1) (Qty. 1)

Parts and Hardware List

Please read completely through the instructions and verify that all listed parts and hardware are present

before beginning assembly.

S- Guide Rail T- Guide Block U- File Hanger V- 14” Ball Bearing Slides

(Qty. 2) (Qty. 4) (Qty. 2) (Qty. 2)

CL- Left Slide Track CR- Right Slide Track DL- Left Slide Runner DR- Right Slide Runner

(Qty. 1) (Qty. 1) (Qty. 1) (Qty. 1)

(1) Small Cam Lock (2) Large Cam Lock (3) Cam Bolt (4) M6 x 30 mm Wood Dowel

(Qty. 8+1 extra) (Qty. 22+1 extra) (Qty. 30+1 extra) (Qty. 4+1 extra)

(5) M8 x 30 mm Wood Dowel (6) M4 x 38 mm Screw (7) M3.5 x 12 mm Flat Head Screw (8) M3.5 x 12 mm Pan Head Screw

(Qty. 22+1 extra) (Qty. 8+1 extra) (Qty. 12+1 extra) (Qty. 12+1 extra)

(9) M4 x 32 mm Screw (10) 5/32” x 28 mm Bolt (11) Handle with Metal Plate Glue Tipping Restraint Hardware Kit (Qty. 1)

(Qty. 2+1 extra) (Qty. 4) (Qty. 2) (Qty. 1) (Included in plastic bag)

Tools required (not included): Phillips screwdriver, stud finder, pencil, tape measure, power drill and 1/8 in drill bit.

Utility Drawer Assembling

NOTE: Please do not fully tighten all bolts until you finish assembling all parts. Once assembled, go

back and fully tighten all bolts. This will make the assembly easier.

1. Unpack the unit and confirm that you have all the hardware and required parts. Assemble the unit on a

carpeted floor or the empty carton to avoid any scratch.

2. Securely screw four Cam Bolts (3) into the designated small holes on the Drawer Front Panel (I) using a

Phillips screwdriver. DO NOT over tighten the cam bolts.

3. Attach the Utility Drawer Sides (K and L) to the Utility Drawer Front Panel (I) by engaging four Small

Cam Locks (1). (Refer to page 3 on Cam Lock system operation supplement).

Grooves line up with each

other and face inward

Utility Drawer Assembling

4. Slide the Utility Drawer Bottom Panel (M) into the grooves on the Utility Drawer Sides (K and L) until

fully inserted into the Utility Drawer Front Panel (I).

5. Fasten the Utility Drawer Back Panel (J) between the Utility Drawer Sides (K and L) with four 38 mm

Screws (6). Make sure that the Drawer Bottom Panel (M) fits securely into the groove on the Drawer

Back Panels (J and K). Tighten the screws with a Phillips screwdriver.

Utility Drawer Assembling

6. Using the pilot holes as a guide, fasten the Left Slide Runner (DL) to the Utility Drawer Left Side (K) using

three 12 mm Flat Head Screws (7). Make sure that the roller end of slide runner faces backward.

7. Repeat the same procedure to attach the Right Slide Runner (DR) to the Utility Drawer Right Side (L).

8. Turn the assembled utility drawer upright and attach one Handle with Metal Plates (11) to the front side

of the Utility Drawer Front Panel (I) with two 28 mm Bolts (10).

The end roller

faces backward

File Drawer Assembling

9. Pick up the 14” Ball Bearing Slides (V) and separate the slide runners for the following step.

10. Extend the slide runners all the way forward. Press the plastic release lever of the ball bearing slides up

and pull the slide runners complete out.

11. Using the pilot holes as a guide, align and attach the separated slide runners to the File Drawer Sides (P

and Q) respectively with three 12 mm Pan Head Screws (8) per slide runner.

Mounting holes

The open end points toward the edge with

counter-sunk holes running against

Open end

Release Lever

Inhaltsverzeichnis

Sprachen:

Andere Whalen Inneneinrichtung Handbücher

Whalen

Whalen Jasper Chrome & Glass Desk Bedienungsanleitung

Whalen

Whalen Montreal Laptop Desk Bedienungsanleitung

Whalen

Whalen Amesville MNFP50AV26IA Bedienungsanleitung

Whalen

Whalen Santa Fe Writing Desk Bedienungsanleitung

Whalen

Whalen Bayside Furnishings CSCDT-3E Bedienungsanleitung

Whalen

Whalen Fallbrook SPUS-FBPS-GM Bedienungsanleitung

Whalen

Whalen BBAVC60-MBC Bedienungsanleitung

Whalen

Whalen STCA48GD Bedienungsanleitung

Whalen

Whalen NOLAHBST Bedienungsanleitung

Whalen

Whalen TV Console Bedienungsanleitung

Whalen

Whalen AVFC54-12BT Bedienungsanleitung

Whalen

Whalen Braxton 7-pc Dining Set Bedienungsanleitung

Whalen

Whalen Luke Twin over Twin Loft Bunk Bed with Desk Bedienungsanleitung

Whalen

Whalen WSHD5PSB Bedienungsanleitung

Whalen

Whalen Belmont 2-in-1 Work Station Bedienungsanleitung

Whalen

Whalen HO48CD-13AXV2 Bedienungsanleitung

Whalen

Whalen Bayside CUS4PCHD-1PC Bedienungsanleitung

Whalen

Whalen Bayside Furnishings CUSWMB-1 Bedienungsanleitung

Whalen

Whalen Bayside CSC7PD-5 Bedienungsanleitung

Whalen

Whalen BBAVCD54N Bedienungsanleitung

Whalen

Whalen Legeant Bookcase Bedienungsanleitung

Whalen

Whalen WMCXL-2 Bedienungsanleitung

Whalen

Whalen Trimble Bookcase ECOM-TR30BK Bedienungsanleitung

Whalen

Whalen Industrial Metal and Wood Tool Cart Bedienungsanleitung

Beliebte Inneneinrichtung Handbücher anderer Marken

Homelegance

Homelegance California 1662PEK-1CK Bedienungsanleitung

Osmond Ergonomics

Osmond Ergonomics FLO Bedienungsanleitung

OVE

OVE ELOISE 42 Bedienungsanleitung

overstock

overstock MF286255 Bedienungsanleitung

Sonoma

Sonoma 160-801 Bedienungsanleitung

BOLERO

BOLERO Wicker Side Chair CF158 Installationsanleitung

Coaster

Coaster 4799N Bedienungsanleitung

Stor-It-All

Stor-It-All WS39MP Programmierhandbuch

Lexicon

Lexicon 194840161868 Bedienungsanleitung

Next AMELIA NEW 462947 Bedienungsanleitung

impekk

impekk Manual II Bedienungsanleitung

Elements

Elements Ember Nightstand CEB700NSE Bedienungsanleitung

JWA

JWA CARY 68429 Bedienungsanleitung

VIPACK

VIPACK AMORI AMKB9014 Bedienungsanleitung

Rowico

Rowico SANNA Bedienungsanleitung

Southern Enterprises

Southern Enterprises CK556000TX Bedienungsanleitung

hygena

hygena 314/5041 Bedienungsanleitung

VINNOVA

VINNOVA Kinsley 536060S Bedienungsanleitung