Whalen TGXLD-1 Bedienungsanleitung

THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION.

PLEASE READ AND KEEP FOR FUTURE REFERENCE.

Whalen Furniture Mfg. Inc. Page 1 Factory No. 33-10944

50” TV Stand w/Storage Drawer (TGXLD-1)

This item is designed to be 3-in-1 configuration. Please choose which of the 3 options suits your

needs. DO NOT discard any of the hardware or parts that you will not use on your set option, this

will give you the opportunity to use this TV Console for different configurations in case you decide

to upgrade your TV set in the future.

ADULT ASSEMBLY REQUIRED

If you have any questions regarding assembly or if you are missing parts, do not return this item to

the Retailer Store. Please call our toll-free customer service number and have your instructions

and parts list ready to provide the model name, part name or factory number:

1-866-942-5362 8:30 a.m. - 4:30 p.m. PST, Monday - Friday

ONLINE: www.whalenfurniture.com EMAIL: parts@whalenfurniture.com

Video Instruction Guides

Go to http://whalen.showuhow.com to view step-by-step instructional

videos for assembling and installing your product. Enter the following

product number on the ShowUhow homepage.

LOT NUMBER:

DATE PURCHASED: / /

Option 1:

With Swinging Floater

TGXLD-1

Model # TGXLD-1

Please call for replacement parts or assistance: 1-866-942-5362

Whalen Furniture Mfg. Inc. Page 2 Factory No. 33-10944

MANUFACTURER: Whalen Furniture

CATALOG: 50” TV Stand w/Storage Drawer (TGXLD-1)

DATE OF MANUFACTURE: January, 2011

MADE IN CHINA

FITS UP TO MOST 56” FLAT PANEL TVs

MAXIMUM LOAD 135 lb. (61.2 kg)

FITS UP TO MOST 56”FLAT PANEL TVs

WITHOUT SWIVELING BRACKET

MAXIMUM LOAD 135 lb. (61.2 kg)

MAXIMUM LOAD 30 lb. (13.6 kg)

MAXIMUM LOAD 50 lb. (22.7 kg)

1. Please read the Assembly Instructions prior to assembling this product.

2. Remove all hardware from box and sort by size.

3. Check to see that all hardware and parts are present BEFORE assembling.

4. Ask a friend to assist you with the assembly of this furniture.

5. To avoid damage, assemble the product on a sturdy, level and protective surface.

6. Please wait until all steps are completed before tightening bolts.

7. Make sure all bolts are tightly fastened before the unit is used.

MAXIMUM RECOMMENDED WEIGHT LOADS

THIS UNIT IS INTENDED FOR USE ONLY WITH THE PRODUCTS

AND MAXIMUM WEIGHTS INDICATED. USE WITH OTHER PRODUCTS OR PRODUCTS

HEAVIER THAN THE MAXIMUM WEIGHTS INDICATED MAY RESULT IN INSTABILITY

CAUSING POSSIBLE INJURY. THE BASE OF THE TELEVISION MUST BE PLACED

SQUARELY IN THE CENTER OF THE STAND WITH NO OVERHANGING ON EITHER SIDE.

GENERAL INFORMATION, TIPS & TRICKS

This product is sold with Tip Restraint Hardware kit. You must install the Tipping Restraint

Hardware between the wall and the TV stand to prevent any accidents or damages. When

properly installed, this restraint can provide protection against the unexpected tipping of the

unit due to small tremors, bumps or climbing. The restraint is only a deterrent and is not a

substitute for proper adult supervision. Use of tip-over restraints may only reduce, but not

eliminate, the risk of tip-over.

Model # TGXLD-1

Please call for replacement parts or assistance: 1-866-942-5362

Whalen Furniture Mfg. Inc. Page 3 Factory No. 33-10944

Parts and Hardware List

Please read completely through the instructions and verify that all parts listed are present

before beginning assembly.

A-Top Shelf Frame (1) B- Middle Shelf Frame (1)

C- Bottom Shelf Frame (1) D- Long Spine (1) D1- Short Spine (1)

E- Left Leg (1) F- Right Leg (1) G- Top Glass (1)

H- Middle Glass Shelf (1) I- Bottom Glass Shelf (1)

J- Drawer Front Panel (1) K- Drawer Back Panel (1) L- Drawer Left Side (1)

Model # TGXLD-1

Please call for replacement parts or assistance: 1-866-942-5362

Whalen Furniture Mfg. Inc. Page 4 Factory No. 33-10944

Parts and Hardware List

Please read completely through the instructions and verify that all parts listed are present

before beginning assembly.

M- Drawer Right Side (1) N- Drawer Bottom Panel (1) O- Drawer Bottom Support (2)

P- Swiveling Bracket (1) Q- XYZ Mounting Frame (1) R- Monitor Bracket (L/R) (2)

(1) - Suction Cup (2) - 3/4” Bolt (3) - 1 1/2” Bolt (4) - 1 5/8” Bolt

(24+1 extra) (34+1 extra) (4+1 extra) (4+1 extra)

(5) - Barrel Nut (6) - Hex Nut (7) - Lock Washer (8) - Flat Washer

(4+1 extra) (4+1 extra) (34+1 extra) (38+1 extra)

(9) - 2 1/2” Lag Bolt (10) - Lag Bolt Washer (11) - Concrete Anchor

(4 pcs) (4 pcs) (4 pcs)

(12)- Cable Control (2) (13)- Corner Bracket (2) (14)- 1/2” Screw (8+1 extra) Touch-up Pen (1)

Model # TGXLD-1

Please call for replacement parts or assistance: 1-866-942-5362

Whalen Furniture Mfg. Inc. Page 5 Factory No. 33-10944

Open Wrench M4 Allen Wrench 3/16” Allen Wrench Tipping Restraint Hardware Kit (1)

(1) (2) (1) (Inside Plastic Bag)

TV Mounting Kit

M4 x 12 Bolt (4) M4 x 30 Bolt (4) M5 X 12 Bolt (4) M5 x 30 Bolt (4)

M6 x12 Bolt (4) M6 x 35 Bolt (4) M8x16 Bolt (4) M8 x40 Bolt (4)

M4 Lock Washer (4) M5 Lock Washer (4) M6 Lock Washer (4) M8 Lock Washer (4)

Large Spacer (4) Small Spacer (4) M4/M5 Flat Washer (8) M6/M8 Flat Washer (4)

Tools required: Allen Wrench (provided) and Open Wrench (provided), Phillips Head

Screwdriver, Mallet, Power Drill, 3/8” & 3/16”Drill Bit, Socket Wrench Adapter with

Socket Set, 1/2” Masonry Bit for brick concrete, Stud Sensor.

PLASTIC FITTING OPERATION

HOW THE KD ASSEMBLY SYSTEM WORKS

1. Align the Latch of Plastic fitting with the slot of Socket. Turn the Lever if necessary.

2. Insert the Latch into the slot of Socket.

3. Connect both panels together. Once the Latch of Plastic fitting is connected inside Socket,

push the Lever all the way to the side with cutout.

You are now ready to assemble our KD unit.

Model # TGXLD-1

Please call for replacement parts or assistance: 1-866-942-5362

Whalen Furniture Mfg. Inc. Page 6 Factory No. 33-10944

Drawer Assembling

1. Unpack the unit and confirm that you have all the hardware and required parts listed.

2. Align and attach Drawer Left & Right Side (L & M) to the Drawer Front Panel

(J) with the end wood dowels fully inserted and all slots facing inside and

align with each other. Using the pilot holes as guide, secure them in place by

attaching 2 Corner Brackets (13) at the joints with the 1/2” Screws (14). See

detail #1A.

3. Slide Drawer Bottom Panel (N) all the way into the slots as shown in detail #1B.

4. Align and insert the Latch of Plastic fitting on Drawer Bottom Supports (O) into the slot of

Sockets on the Drawer Front Panel (J). Turn the Lever if necessary. Once the Latch of

Plastic fitting is connected inside Socket, push the Lever all the way to the side with cutout to

connect them together. See detail #1B.

5. Align and attach Drawer Back Panel (K) on the other end of Drawer Bottom Supports (O) by

engaging the Plastic Fittings properly. Make sure that the Drawer Bottom Panel (N) fits

securely into the groove of Drawer Back Panel, before pushing the Lever of Plastic Fittings.

6. Insert 2 Barrel Nuts (5) into each end of the Drawer Back Panel (K). Be sure that the long

slot on the Barrel Nut is facing out and that the long groove is pointing towards the entry of

the bolt. See detail #1C.

7. Connect Drawer Back Panel (K) to Drawer Left & Right Side (L & M) by inserting the 1 5/8”

Bolts (4) through the countersunk holes on Side Panels into the Barrel Nuts inserted. Tighten

with Phillips Screwdriver. See detail #1C.

Model # TGXLD-1

Please call for replacement parts or assistance: 1-866-942-5362

Whalen Furniture Mfg. Inc. Page 7 Factory No. 33-10944

Assembly Instructions

Note: Please do not fully tighten all bolts until you finish assembling all parts. Once assembled,

go back and fully tighten all bolts. This will make it easier during assembly of unit.

8. Choose the option suits your needs. Locate Long Spine (D) or Short Spine (D1) and set

back face down on a scratch free surface as shown in detail #2.

9. Align the holes on “U” shape bracket of three Shelf Frames (A, B & C) with the threaded

sockets on the Spine (D or D1), insert and screw 3/4”Bolts (2) with Lock Washers & Flat

Washers (7 & 8) through the bracket holes into the Spine. See detail #2.

Required hardware in this step

Description: (2) –3/4” Bolt (7) - Lock Washer (8) - Flat Washer

Sketch

Qty. (12 pcs) (12 pcs) (12 pcs)

Tools required: M4 Allen Wrench

Model # TGXLD-1

Please call for replacement parts or assistance: 1-866-942-5362

Whalen Furniture Mfg. Inc. Page 8 Factory No. 33-10944

Assembly Instructions

10.Stand the unit upright.

11.Align and attach Left Leg (E) to Top Shelf Frame (A) by inserting two 1 1/2” Bolts (3) with

Washers (7 & 8) from inside the shelf frame through the pre-drilled holes on side rail into the

threaded inserts on Leg. Make sure that top rail of Leg is flush with the wooden front rail of

Top Shelf Frame. See detail #3. DO NOT tighten the bolts.

12.Secure Left Leg (E) to Middle & Bottom Shelf Frame (B & C) using the 3/4” Bolts (2) with

Washers (7 & 8) through the end bracket holes into the Leg. See detail #3.

13.Repeat last 2 steps with Right Leg (F). Make sure the gap between the wooden front rail of

Top Shelf Frame and Legs are the same. Loosen the bolts on wooden front rail and adjust if

necessary.

Required hardware in this step

Description: (2) - 3/4” Bolt (3)- 1 1/2” Bolt (7) - Lock Washer (8) - Flat Washer

Sketch

Qty. (8 pcs) (4 pcs) (12 pcs) (12 pcs)

Tools required: M4 Allen Wrench

Model # TGXLD-1

Please call for replacement parts or assistance: 1-866-942-5362

Whalen Furniture Mfg. Inc. Page 9 Factory No. 33-10944

Assembly Instructions

14.Go back and tighten all bolts with Allen Wrench provided.

15.In case of uneven floor, Floor Levelers are provided at the bottom of both Legs (E & F).

Simply tilt the unit back and raise or lower floor leveler by hand to correct tilting as shown in

detail #4.

If you choose Table-top configuration,

continue to STEP 16.

If mounting TV with the Swinging Floater,

skip ahead to PAGE 13.

Model # TGXLD-1

Please call for replacement parts or assistance: 1-866-942-5362

Whalen Furniture Mfg. Inc. Page 10 Factory No. 33-10944

Assembly Instructions for Table-top

16.Attach two Cable Controls (12) onto the backside of Spine (D1) with the 3/4”Bolts (2).

Tighten the bolts with M4 Allen Wrench provided. See detail #5.

17.The Cable Controls (12) enable you to shorten, separate and route both single and bundled

cables. Using the Cable Controls you can create a system for routing cables through

channels, between components and to power sources without usual tangled mess or

annoying signal interference. As shown in detail #5.

Required hardware in this step

Description: (2) - 3/4” Bolt (12) –Cable Control

Sketch

Qty. (4 pcs) (2 pcs)

Tools required: M4 Allen Wrench

Inhaltsverzeichnis

Andere Whalen Inneneinrichtung Handbücher

Whalen

Whalen Hendricks Series Bedienungsanleitung

Whalen

Whalen Bayside CSC3N1C-56-9 Bedienungsanleitung

Whalen

Whalen BBAVCWL60-BC Bedienungsanleitung

Whalen

Whalen WS-NIR-722484-5S Bedienungsanleitung

Whalen

Whalen Jaxon 3-in-1 XL-27 Bedienungsanleitung

Whalen

Whalen PRO-9 Bedienungsanleitung

Whalen

Whalen DME5233FPC-BRM Wartungshandbuch

Whalen

Whalen Bayside CSC7PD-5 Bedienungsanleitung

Whalen

Whalen Peruzzi SPLS-PE48D Bedienungsanleitung

Whalen

Whalen Crestwood MNFP68CW30MB Bedienungsanleitung

Whalen

Whalen Bayside CUS60AC-1 Bedienungsanleitung

Whalen

Whalen Bayside CSC7PD-8 Bedienungsanleitung

Whalen

Whalen Villa Tuscano Bedienungsanleitung

Whalen

Whalen BBLAVC54T Bedienungsanleitung

Whalen

Whalen Sagemoor SAGE7PD-E Bedienungsanleitung

Whalen

Whalen BBAVCD54N Bedienungsanleitung

Whalen

Whalen Laminate 44" High Console Bedienungsanleitung

Whalen

Whalen Bayside CUS60WD-5 Bedienungsanleitung

Whalen

Whalen Bayside CUS54WD-6 Bedienungsanleitung

Whalen

Whalen Bayside FURNISHINGS CSC7PD-12-T Bedienungsanleitung

Whalen

Whalen Z BEAM WSZB1848-5BW-2 Bedienungsanleitung

Whalen

Whalen WSLPWS Bedienungsanleitung

Whalen

Whalen Bayside Furnishings CUS7PD-3-BL Bedienungsanleitung

Whalen

Whalen Industrial Metal and Wood Workbench Bedienungsanleitung

Beliebte Inneneinrichtung Handbücher anderer Marken

Homelegance

Homelegance California 1662PEK-1CK Bedienungsanleitung

Osmond Ergonomics

Osmond Ergonomics FLO Bedienungsanleitung

OVE

OVE ELOISE 42 Bedienungsanleitung

overstock

overstock MF286255 Bedienungsanleitung

Sonoma

Sonoma 160-801 Bedienungsanleitung

BOLERO

BOLERO Wicker Side Chair CF158 Installationsanleitung

Coaster

Coaster 4799N Bedienungsanleitung

Stor-It-All

Stor-It-All WS39MP Programmierhandbuch

Lexicon

Lexicon 194840161868 Bedienungsanleitung

Next AMELIA NEW 462947 Bedienungsanleitung

impekk

impekk Manual II Bedienungsanleitung

Elements

Elements Ember Nightstand CEB700NSE Bedienungsanleitung

JWA

JWA CARY 68429 Bedienungsanleitung

VIPACK

VIPACK AMORI AMKB9014 Bedienungsanleitung

Rowico

Rowico SANNA Bedienungsanleitung

Southern Enterprises

Southern Enterprises CK556000TX Bedienungsanleitung

hygena

hygena 314/5041 Bedienungsanleitung

VINNOVA

VINNOVA Kinsley 536060S Bedienungsanleitung