Whalen TV Console Bedienungsanleitung

THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION.

PLEASE READ AND KEEP FOR FUTURE REFERENCE.

Whalen Furniture Manufacturing Page 1 Factory No. 16086

Date 2014-10-27 Rev. 1 Factory: KONRIC

TV Console

Model # AVCLEC60-DB

ADULT ASSEMBLY REQUIRED

If you have any questions regarding assembly or if parts are missing, DO NOT return this item to the store where

it was purchased. Please call our toll-free customer service number and have your instructions and parts list

ready to provide the model name, part name or factory number:

1-866-942-5362

Pacific Standard Time: 8:30 a.m. - 4:30 p.m., Monday to Friday

Or visit our website 24 hours a day, 7 days a week for product assistance at

www.whalenfurniture.com

Or e-mail your request to [email protected]

LOT NUMBER:

DATE PURCHASED: / /

Model # AVCLEC60-DB

Please call for replacement parts or assistance: 1-866-942-5362

Whalen Furniture Manufacturing Page 2 Factory No. 16086

MANUFACTURER: Whalen Furniture Manufacturing

CATALOG: TV Console (AVCLEC60-DB)

DATE OF MANUFACTURE: October 2014

MADE IN CHINA

How to adjust the European adjustable hinges on doors

Shipping may cause doors to go out of alignment. If you find that the doors need to be adjusted slightly,

turn the appropriate screw, as illustrated.

1. TO ADJUST DOOR FORWARD OR BACKWARD.

2. TO ADJUST DOOR TO RIGHT OR TO LEFT.

3. TO ADJUST DOOR UP OR DOWN.

MAXIMUM RECOMMENDED WEIGHT LOADS

MAXIMUM LOAD 50 lb. (22.6 kg)

FITS UP TO MOST 70” FLAT PANEL TVs

MAXIMUM LOAD 135 lb. (61.2 kg)

THIS UNIT IS NOT INTENDED FOR USE WITH CRT TVS. USE ONLY WITH

FLAT PANEL TVS AND AUDIO/VIDEO EQUIPMENT MEETING RECOMMENDED SIZE AND

WEIGHT LIMITS. NEVER USE WITH LARGER/HEAVIER THAN RECOMMENDED FLAT PANEL

TVS OR EQUIPMENT. TO AVOID INSTABILITY, PLACE FLAT PANEL TV IN THE CENTRE OF

THE UNIT; THE BASE OF THE TELEVISION MUST BE ABLE TO REST ON THE SUPPORTING

SURFACE OF THE UNIT WITHOUT OVER-HANGING THE EDGES. IMPROPERLY POSITIONED

FLAT PANEL TVS, OR FLAT PANEL TVS OR OTHER EQUIPMENT THAT EXCEED

RECOMMENDED SIZE AND WEIGHT LIMITS COULD FALL OFF OR BREAK THE UNIT,

CAUSING POSSIBLE SERIOUS INJURY.

Model # AVCLEC60-DB

Please call for replacement parts or assistance: 1-866-942-5362

Whalen Furniture Manufacturing Page 3 Factory No. 16086

Important

Before you begin: Open, identify and count all parts prior to assembly. Lay out parts on a flat and non-

abrasive surface. You will need the parts identified on page 4 and 5 of this instruction manual.

NOTE: IT IS VERY IMPORTANT TO USE GLUE WITH DOWELS. EXCESS GLUE CAN BE WIPED

OFF WITH DAMP CLOTH.

Insert Dowel at least half way by tapping lightly with a rubber mallet, IF NECESSARY.

CAM LOCK SYSTEM OPERATION

HOW THE KNOCK DOWN (KD) ASSEMBLY SYSTEM WORKS

1. Screw the Cam Bolt into the threaded inserts on the panel. Connect both panels together; making sure Cam

Bolt goes into the pre-drilled hole on the end of panel for Cam Lock.

2. Insert the Cam Lock into the pre-drilled large hole on the panel. Make sure the arrow on the face of Cam

Lock faces out and points towards Cam Bolt.

3. Take a Phillips screwdriver and rotate the Cam Lock clockwise to lock the Cam Bolt in place.

4. Plug the Cam Lock Cover into the cross slot of the Cam Lock to conceal the Cam.

You are now ready to assemble the KD unit.

XXFINAL

12 43

Model # AVCLEC60-DB

Please call for replacement parts or assistance: 1-866-942-5362

Whalen Furniture Manufacturing Page 4 Factory No. 16086

Parts and Hardware List

Please read completely through the instructions and verify that all listed parts and hardware are present

before beginning assembly.

A- Top Panel (1) B- Left Side Frame (1) C- Right Side Frame (1)

D- Left Partition Panel (1) E- Right Partition Panel (1) F- Door (2)

G- Bottom Shelf (1) H- Bottom Front Molding (1) I- Bottom Back Stretcher (1)

J- Small Adjustable Shelf (2) K- Large Adjustable Shelf (1) L- Back Panel (1)

M- Center Support w/Leveler (1) N- Cable Wheel (2)

Model # AVCLEC60-DB

Please call for replacement parts or assistance: 1-866-942-5362

Whalen Furniture Manufacturing Page 5 Factory No. 16086

Parts and Hardware List

Please read completely through the instructions and verify that all listed parts and hardware are present

before beginning assembly.

(1) Cam Lock (2) Cam Bolt (3) M8 x 30 mm Wood Dowel

(20+1 extra) (20+1 extra) (22+1 extra)

(4) M3 x 12 mm Screw (5) M3.5 x 16 mm Washer Head Screw (6) M4 x 40 mm Wood Screw

(8+1 extra) (22+1 extra) (4+1 extra)

(7) Handle (8) Handle Bolt (9) Ø1/4” x 3/4” Bolt

(2) (4+1 extra) (4+1 extra)

(10) Metal Bracket (11) Floor Leveler (12) Shelf Pin (13) Cam Lock Cover

(2) (2) (12+1 extra) (14+1 extra)

(14) Rubber Pad Glue Touch-up Pen Tipping Restraint Hardware Kit (2)

(4+1 extra) (1) (1) (Included in plastic bag)

Tools required: Phillips screwdriver and Hammer (not provided).

Model # AVCLEC60-DB

Please call for replacement parts or assistance: 1-866-942-5362

Whalen Furniture Manufacturing Page 6 Factory No. 16086

Assembly Instructions

1. Unpack the unit and confirm that you have all the hardware and required parts. Assembly the unit on a

carpeted floor or the empty carton to avoid any scratch.

2. Securely screw the Cam Bolts (2) into the designated small holes on the Top Panel (A), Left and Right

Side Frames (B and C), and the Bottom Panel (G) with a Phillips screwdriver, as shown in the

illustration.

NOTE: Screw-in cam bolts must be screwed down flush.

A/G

Cam Bolt

(20 used in this step)

②

Model # AVCLEC60-DB

Please call for replacement parts or assistance: 1-866-942-5362

Whalen Furniture Manufacturing Page 7 Factory No. 16086

Assembly Instructions

3. Insert two Wood Dowels (3) into the inner end holes on the Bottom Front Molding (H) and attach it to

the front edge of Bottom Panel (G) by engaging three Cam Locks (1) (Refer to page 3 on Cam Lock

system operation supplement). As shown. Make sure that you use a small amount of glue with both

ends of all dowels.

NOTE: It is very important to use a small mount of glue on both ends of dowels.

4. Align and attach the Bottom Back Stretcher (I) to the Bottom Panel (G) by using two Wood Dowels (3)

and three Cam Locks (1). Make sure that the cam locks face inward. As shown.

5. Insert three Wood Dowels (3) into the left end holes of Bottom Panel (G) and Bottom Back Stretcher (I).

DO NOT put dowels into the Cam Bolt holes. Align and attach Left Side Frame (B) to the assembled

base by engaging three Cam Locks (1). As shown.

6. Repeat the same process to attach the Right Side Frame (C) at the opposite end.

Cam Lock

(12 used in this step)

①

M8 x 30 mm Wood Dowel

(10 used in this step)

③

Model # AVCLEC60-DB

Please call for replacement parts or assistance: 1-866-942-5362

Whalen Furniture Manufacturing Page 8 Factory No. 16086

Assembly Instructions

7. Insert two Wood Dowels (3) into the inner holes on the bottom edge of each Partition Panel (D and E)

and fasten them to the Bottom Panel (G) with four M4 x 40 mm Wood Screws (6), as shown. Make sure

the threaded inserts for Cable Wheel on the Partition Panels (D and E) face the back of the unit.

NOTE: Press the Partition Panels (D and E) to the Bottom Panel (G) while tightening the screws.

FRONT

M4 x 40 mm Wood Screw

(4 used in this step)

⑥

M8 x 30 mm Wood Dowel

(4 used in this step)

③

Model # AVCLEC60-DB

Please call for replacement parts or assistance: 1-866-942-5362

Whalen Furniture Manufacturing Page 9 Factory No. 16086

Assembly Instructions

8. Insert eight Wood Dowels (3) into the inner holes on the top edge of Side Frames (B and C) and the

Partition Panels (D and E). As shown.

9. Position the Top Panel (A) onto the inserted Wood Dowel (3) making the back egdes are even with each

other. Attach the Top Panel (A) in place by engaging eight Cam Locks (1). As shown.

Cam Lock

(8 used in this step)

①

M8 x 30 mm Wood Dowel

(8 used in this step)

③

Model # AVCLEC60-DB

Please call for replacement parts or assistance: 1-866-942-5362

Whalen Furniture Manufacturing Page 10 Factory No. 16086

Assembly Instructions

10. Fasten two Metal Brackets (10) to connect the Bottom Front Molding (H) with both Side Frames (B and

C), using four M3 x 12 mm Screws (4) per bracket. As shown.

11. Tightly screw the Central Support (M) into the threaded insert on the Bottom Panel (G) and set the

attached floor leveler to correct height.

10 H

B/C

M3 x 12 mm Screw

(8 used in this step)

④

Metal Bracket

(2 used in this step)

⑩

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Whalen Inneneinrichtung Handbücher

Whalen

Whalen AVCBEC60-SMB Bedienungsanleitung

Whalen

Whalen Industrial Metal and Wood Tool Cart Bedienungsanleitung

Whalen

Whalen ODUS-TWVD Bedienungsanleitung

Whalen

Whalen Bayside Furnishings CSC72LBK-6 Bedienungsanleitung

Whalen

Whalen WF24HVO Bedienungsanleitung

Whalen

Whalen Pecan pier w/Hutch Bedienungsanleitung

Whalen

Whalen Belmont 2-in-1 Work Station Bedienungsanleitung

Whalen

Whalen WF60AVG Bedienungsanleitung

Whalen

Whalen ECOM-RPD Bedienungsanleitung

Whalen

Whalen XLDEC54-NV Bedienungsanleitung

Whalen

Whalen WSZB244872-SV5MS Bedienungsanleitung

Whalen

Whalen LANTOFLBB Bedienungsanleitung

Whalen

Whalen Asher Series Bedienungsanleitung

Whalen

Whalen WSZB184872-GW5BMS Bedienungsanleitung

Whalen

Whalen Bayside CSC7PD-5 Bedienungsanleitung

Whalen

Whalen Sedona MNFP54BF23-5 Bedienungsanleitung

Whalen

Whalen LEVELUP SPLS-LTCGD Bedienungsanleitung

Whalen

Whalen Marilla OD-MA48PD Bedienungsanleitung

Whalen

Whalen Triton Wood Veneer Bookcase Bedienungsanleitung

Whalen

Whalen GC-1 Bedienungsanleitung

Whalen

Whalen HOCSFC-13AX Bedienungsanleitung

Whalen

Whalen Bayside CSC72TC-10 Bedienungsanleitung

Whalen

Whalen Bayside Furnishings CSC7PD-2B Bedienungsanleitung

Whalen

Whalen Bayside Furnishing 1644994 Bedienungsanleitung

Beliebte Inneneinrichtung Handbücher anderer Marken

Homelegance

Homelegance California 1662PEK-1CK Bedienungsanleitung

Osmond Ergonomics

Osmond Ergonomics FLO Bedienungsanleitung

OVE

OVE ELOISE 42 Bedienungsanleitung

overstock

overstock MF286255 Bedienungsanleitung

Sonoma

Sonoma 160-801 Bedienungsanleitung

BOLERO

BOLERO Wicker Side Chair CF158 Installationsanleitung

Coaster

Coaster 4799N Bedienungsanleitung

Stor-It-All

Stor-It-All WS39MP Programmierhandbuch

Lexicon

Lexicon 194840161868 Bedienungsanleitung

Next AMELIA NEW 462947 Bedienungsanleitung

impekk

impekk Manual II Bedienungsanleitung

Elements

Elements Ember Nightstand CEB700NSE Bedienungsanleitung

JWA

JWA CARY 68429 Bedienungsanleitung

VIPACK

VIPACK AMORI AMKB9014 Bedienungsanleitung

Rowico

Rowico SANNA Bedienungsanleitung

Southern Enterprises

Southern Enterprises CK556000TX Bedienungsanleitung

hygena

hygena 314/5041 Bedienungsanleitung

VINNOVA

VINNOVA Kinsley 536060S Bedienungsanleitung