White Rodgers BP150 Verdrahtungsschema

Line Voltage Programmable Thermostat

Installation Instructions & User Guide

Congratulations on the purchase of your

White-Rodgers™thermostat!

Save these instructions for future use!

Questions? Contact White-Rodgers

Customer Service at 1-877-654-9394

For BP150, BP150C, BP125C,1E65-151

37-7457B

Before installing and operating this product, the owner and/or installer must read,

understand and follow these instructions and keep them handy for future reference.

If these instructions are not followed, the warranty will be considered null and void

and the manufacturer deems no further responsibility for this product. Moreover,

the following instructions must be adhered to in order to avoid personal injuries or

property damages, serious injuries and potentially fatal electric shocks. All electric

connections must be made by a qualied electrician, according to the electric and

building codes effective in your region. Do NOT connect this product to a supply

source other than 120 VAC or 240 VAC, and do not exceed the load limits specied.

Protect the heating system with the appropriate circuit breaker or fuse. You must

regularly clean dirt accumulations on the thermostat. Do NOT use uid to clean

thermostat air vent. Do not install thermostat in a wet place. However, installing it in

insulated walls is allowed.

Note :

When a part of the product specication must be changed to improve operability or

other functions, priority is given to the product specication itself. In such instances,

the instruction manual may not entirely match all the functions of the actual product.

Therefore, the actual product and packaging, as well as the name and illustration,

may differ from the manual.

The screen/LCD display shown as an example in this manual may be different from the

actual screen/LCD display.

WARNING WARNING

1. Description

This programmable electronic thermostat can be used to control electric heating units

such as electric baseboards, convectors, or aeroconvectors. It keeps the temperature

of a room at the requested set point with a high degree of accuracy. This product is

designed for installations with electrical current – with a resistive load – ranging from

1.25 A to 12.5 A (120/240 VAC). It possesses a user-friendly interface. Furthermore,

it gives you the possibility to control the temperature of a room with great precision.

This thermostat is not compatible with the following installations :

• Electrical current higher than 12.5 A with a resistive load (3000 W @ 240 VAC and

1500 W @ 120 VAC);

• Electrical current lower than 1.25 A with a resistive load (300 W @ 240 VAC and 150

W @ 120 VAC); and

• Central heating system.

Parts supplied:

• one (1) thermostat;

• wall mounting plate located at the back of the thermostat;

• two (2) mounting screws;

• two (2) solderless connectors suitable for copperwires.

2. Installation

Selection of the thermostat location

The thermostat must be mounted to a connection box on a wall facing the heating

unit, at around 1.5 m (5 feet) above the oor level, on a section of the wall exempt

from pipes or air ducts.

Do not install the thermostat in a location where temperature measurements could

be altered. For example:

• close to a window, on an external wall, or close to a door leading outside;

• exposed directly to the light or heat of the sun, a lamp, a replace or any other heat

source;

• close or in front of an air outlet;

• close to concealed ducts or a chimney; and

• in a location with poor air ow (e.g. behind a door), or with frequent air drafts (e.g.

head of stairs).

Thermostat mounting and connection

1. Cut off power supply on lead wires at the electrical panel in order

to avoid any risk of electric shock.

2. Ensure that the air vents of the thermostat are clean and clear of any obstruction.

3. Using a screwdriver, loosen the screw retaining the mounting base of the

thermostat until it is loose (do not completely remove the screw).

Then, remove the mounting base at the back of the thermostat by pushing it

downwards and then towards you.

4. Align and secure the mounting base to the connection box using the two screws

supplied.

5. Pass the wires from the wall through the opening on the mounting base and connect

them using the supplied solderless connectors. When making the connection with

aluminum wire, make sure that you are using connectors identied CO/AL. Please

note that the thermostat wires do not have polarity. Therefore, the way they are

connected is not important.

2-wire installation

4-wire installation

6. Place all the wires into the connection box.

7. Align the little slots located on the top of the thermostat with those on the

mounting base and secure the thermostat to the mounting base. Note that you can

also position the thermostat on the left or the right side of the junction box. Then,

tighten the screw at the bottom of the unit.

8. Turn on the power.

9. Set the thermostat to the desired setting (see the following section).

3. Operation

The programmable thermostat has three main operating modes: Manual ( ),

Automatic ( ) and Preprogrammed ( ). The active mode is displayed

at the bottom of the screen. The transition from one mode to another is done by

pressing down the , button, out of any adjustment mode.

Note: it is impossible to change the operation mode when the Security mode is activated.

When rst powered up, the thermostat is initially in degrees Celsius, in

Preprogrammed mode (preprogram 5), and the Anticipated start mode is activated.

The clock is adjusted to Saturday (12:00) and ashes to indicate that an adjustment is

necessary. The preprogram is effective immediately.

Ambient temperature

Heating power

indicator

Security mode

Fan mode

+ button (to increase)

Mode (Manual;

Automatic;

Preprogrammed

Programming period

Anticipated start

Hour

Frost-fr ee warning

- button (to decrease)

Mode button

Clock button

Days (L/M : Monday,

M/T : T uesday,

M/W : W ednesday,

J/T : Thursday,

V/F : Friday,

S/S : Satur day and

D/S : Sunday)

Adjustment of the hour and the day

To adjust the hour and the day:

1. In any mode (Manual, Automatic or Preprogrammed), out of any adjustment

mode, press down the button and release it.

2. The current time mode (24H/12H) is displayed. Press down the or button to

select the desired format. Press down the button to conrm your choice.

3. The two hour digits ash. Adjust the hours using the and Press down the

button to conrm your choice.

4. The two minute digits ash. Adjust the minutes using the and buttons. Press

down the button to conrm your choice.

5. The day of the week ashes. Adjust using the and buttons. Press down the

button to conrm your choice.

The adjustment is thus completed and the thermostat returns to normal operation.

It is possible to exit the hour and day adjustment mode at any time :

• By pressing down the button.

• By not pressing down any buttons during 1 minute.

In case of a power failure lasting less than 2 hours, the thermostat saves the

adjustment of the hour and the day of the week. When the power is restored after an

extensive failure, the hour will blink, indicating that it must be readjusted.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere White Rodgers Thermostat Handbücher

White Rodgers

White Rodgers 1F89-211 Bedienungsanleitung

White Rodgers

White Rodgers IF78 Bedienungsanleitung

White Rodgers

White Rodgers 1F95-397 Bedienungsanleitung

White Rodgers

White Rodgers 1F91W-71 Bedienungsanleitung

White Rodgers

White Rodgers 1F97-1271 Bedienungsanleitung

White Rodgers

White Rodgers 1F89-211 Bedienungsanleitung

White Rodgers

White Rodgers 1F97W-51 Bedienungsanleitung

White Rodgers

White Rodgers 1F80-224 Bedienungsanleitung

White Rodgers

White Rodgers 1F78 Bedienungsanleitung

White Rodgers

White Rodgers 1F89-211 Bedienungsanleitung

White Rodgers

White Rodgers 1F81-71 Bedienungsanleitung

White Rodgers

White Rodgers 1F86-241 Bedienungsanleitung

White Rodgers

White Rodgers 1F92W-51 Original Betriebsanleitung

White Rodgers

White Rodgers 1F91W-71 Bedienungsanleitung

White Rodgers

White Rodgers 1F97-51 Bedienungsanleitung

White Rodgers

White Rodgers 1F56N-911 Bedienungsanleitung

White Rodgers

White Rodgers 1E78-140 Bedienungsanleitung

White Rodgers

White Rodgers 1F94-71 Bedienungsanleitung

White Rodgers

White Rodgers BLUE EASY 1F86EZ-0251 Montageanleitung

White Rodgers

White Rodgers BLUE 2 1F89-0211 Bedienungsanleitung

White Rodgers

White Rodgers BNP125 Verdrahtungsschema

White Rodgers

White Rodgers 90 SERIES Bedienungsanleitung

White Rodgers

White Rodgers 1F85-277 Bedienungsanleitung

White Rodgers

White Rodgers 1F59-13 Montageanleitung

Beliebte Thermostat Handbücher anderer Marken

EWELLY

EWELLY EW-181 Bedienungsanleitung

Prolon

Prolon T1100 Montageanleitung

Computherm

Computherm Q20 Bedienungsanleitung

Heatmiser

Heatmiser neoStat Bedienungsanleitung

Mars

Mars HEAT CONTROLLER IR Wireless Thermostat Bedienungsanleitung

Saswell

Saswell SAS920XWHB-7-S-RF Leitfaden

Aircalo

Aircalo TFP1-ET85P2 Bedienungsanleitung

Honeywell

Honeywell CM721 Bedienungsanleitung

Carrier

Carrier DEBONAIR 33CS Bedienungsanleitung

Lennox

Lennox iHarmony Zone Thermostat Montageanleitung

Gemtech

Gemtech GT7000 Bedienungsanleitung

Rollei

Rollei Smartes 45000 Bedienungsanleitung

Sinope

Sinope TH1300RF Bedienungsanleitung

Honeywell

Honeywell RLV4305 Bedienungsanleitung

Honeywell

Honeywell Prestige 2.0 THX9421 Bedienungsanleitung

NuTone

NuTone NTBZ48 Original Betriebsanleitung

Stelpro

Stelpro MAESTRO ASMT402AD Bedienungsanleitung

Honeywell

Honeywell T6811 Bedienungsanleitung