Wilson Electronics IoT 5-Band Bedienungsanleitung

IoT 5-Band

Direct-Connect Cell Signal Ampliﬁer

Installation Guide

BU-GDE000209-003-121119.indd 1 12/11/2019 2:40:27 PM

Index

Package Contents ........................................................... 2

IoT Retail Application Steps ..................................................3-6

IoT Securtiy Application Steps ...............................................7-10

Status Light Patterns ......................................................... 11

Safety Guidelines ........................................................... 12

Speciﬁcations ............................................................... 16

Warranty ................................................................... 17

BU-GDE000209-003-121119.indd 2 12/11/2019 2:40:28 PM

IoT 5-Band

Direct-Connect Cell Signal Ampliﬁer

The WilsonPro IoT 5-Band is a “Direct-Connect” solution for amplifying cellular

network capable equipment and devices, including vending machines, ATMs,

security panels, and cellular “hotspots”. The IoT 5-Band is “carrier agnostic” and pre-

approved by all major cell carriers under FCC “part 20” rules. No additional carrier

or FCC approvals are required.

The IoT 5-band is available in three dierent kit options: 460119: basic kit with

traditional a/c power supply, 460219: with “hard-wired” DC power supply (for

supplying power from a vehicle or similar power source), and the 461119 Security Kit

which includes MMCX cables for interfacing with security control panel cell modems,

and an outside antenna.

BU-GDE000209-003-121119.indd 1 12/11/2019 2:40:28 PM

Package Contents

IoT 5-Band

Cell Signal Amplifier

(460019)

Kit Options (IoT 5-Band Cell Signal Ampliﬁer included)

IoT 5-Band Kit

460119

■6 ft.RG-174 w/SMA

■5V / 4A A/C Power

Supply

■4 in. Mini Magnetic

Antenna

IoT DC Hardwire Kit

460219

■6 ft.RG-174 w/SMA

■6V / 2A Hardwired

Power Supply

■4 in. Mini Magnetic

Antenna

■12 in.RG-316

w/MMcx

■12 in.Adapter

w/MMcx

■10ft.RG-58

w/SMA

■30ft.RG-58

w/SMA

■5V / 4A

A/C Power Supply

■Omni Antenna

IoT Security Kit

461119

Any Kit Option

Below

BU-GDE000209-003-121119.indd 2 12/11/2019 2:40:28 PM

STEP 1 Outside Antenna

Placement

Mount the Outside Antenna on top

of a metal structure that is free of

obstructions and 12 in. away from any

other antennas.

Select a location to install the Signal

Ampliﬁer that is away from excessive

heat, direct sunlight, moisture and that

has proper ventilation.

STEP 2 Ampliﬁer Placement

Outside Antenna

5-Band Ampliﬁer

IoT Retail Application Example

BU-GDE000209-003-121119.indd 3 12/11/2019 2:40:32 PM

Run the Outside Antenna Cable to

the Signal Ampliﬁer and attach it

to the connector labeled Outside

Antenna. Finger tighten only.

STEP 3 Route & Connect

Antenna to Ampliﬁer

Outside Antenna

IoT 5-Band

Signal Ampliﬁer

Connect the provided cable to

the cellular device (adapter may

be needed) then to the connector

labeled Data Device on the Signal

Ampliﬁer. Finger tighten only.

STEP 4 Connect Device

to Ampliﬁer

Outside Antenna

IoT 5-Band

Signal Ampliﬁer

Data

Device

BU-GDE000209-003-121119.indd 4 12/11/2019 2:40:33 PM

Plug the Power Supply into an outlet

(or connect to hardwired 12V DC

source if kit 460219 is used) then

connect to end of ampliﬁer

labeled POWER.

STEP 5 Power Up the

Ampliﬁer

Outside Antenna

IoT 5-Band

Signal Ampliﬁer

Power Supply

■If the ampliﬁer loses power, internal circuitry will

bypass the ampliﬁer switch so that a connection

is made directly to the antenna.

■Safeguard your devices. Using a surge

protector is always recommended for these

applications.

Important

Modem

IoT 5-Band

Ampliﬁer Antenna

IoT 5-Band

Signal Ampliﬁer

Data

Device

BU-GDE000209-003-121119.indd 5 12/11/2019 2:40:34 PM

Outside Antenna

Diagram

Cellular Modem

IoT 5-Band

Ampliﬁer

Power Supply

Surge Protector

BU-GDE000209-003-121119.indd 6 12/11/2019 2:40:35 PM

STEP 1 Outside Antenna

Placement

Mount the Outside Antenna on top

of a metal structure that is free of

obstructions and 12 in. away from

any other antennas.

Select a location to install the Signal

Ampliﬁer that is away from excessive

heat, direct sunlight, moisture and that

has proper ventilation.

STEP 2 Ampliﬁer Placement 5-Band

Ampliﬁer

IoT Security Application Example Omni Outside

Antenna

BU-GDE000209-003-121119.indd 7 12/11/2019 2:40:42 PM

When using the Omni Outside

Antenna, connect the N-Type

connector to the antenna, then

the SMA end to the amplifer.

Finger tighten only.

STEP 3 Route & Connect

Antenna to Ampliﬁer

IoT 5-Band

Signal Ampliﬁer

Connect the provided MMCX

cable to the Security Control Panel

(adapter may be needed) then to

the connector labeled Data Device

on the Signal Amplifer.

STEP 4 Connect Device

to Ampliﬁer

Omni Outside

Antenna

Omni Outside

Antenna

IoT 5-Band

Signal Ampliﬁer Security

Control Panel

BU-GDE000209-003-121119.indd 8 12/11/2019 2:40:44 PM

Andere Handbücher für IoT 5-Band

Inhaltsverzeichnis

Andere Wilson Electronics Extender Handbücher

Wilson Electronics

Wilson Electronics Weboost AM100-PRO Bedienungsanleitung

Wilson Electronics

Wilson Electronics weBoost Drive Reach RV Bedienungsanleitung

Wilson Electronics

Wilson Electronics 460102 Bedienungsanleitung

Wilson Electronics

Wilson Electronics SIGNALBOOST 811210 Bedienungsanleitung

Wilson Electronics

Wilson Electronics 271265 Bedienungsanleitung

Wilson Electronics

Wilson Electronics iDEN 800 MHz 274080 Bedienungsanleitung

Wilson Electronics

Wilson Electronics SLEEK 2B5225 Bedienungsanleitung

Wilson Electronics

Wilson Electronics PRO 1100 Bedienungsanleitung

Wilson Electronics

Wilson Electronics weboost AH100-PRO Bedienungsanleitung

Wilson Electronics

Wilson Electronics AG Pro 75 Bedienungsanleitung

Wilson Electronics

Wilson Electronics WEBOOST DRIVE X OTR Bedienungsanleitung

Wilson Electronics

Wilson Electronics weBoost Connect 4G-X 471104R Bedienungsanleitung

Wilson Electronics

Wilson Electronics 460054 Bedienungsanleitung

Wilson Electronics

Wilson Electronics weboost DRIVE REACH Bedienungsanleitung

Wilson Electronics

Wilson Electronics Sleek Bedienungsanleitung

Wilson Electronics

Wilson Electronics 460008 Bedienungsanleitung

Wilson Electronics

Wilson Electronics Signal 3G Bedienungsanleitung

Wilson Electronics

Wilson Electronics 4000R Bedienungsanleitung

Wilson Electronics

Wilson Electronics PRO 70 PLUS SELECT Bedienungsanleitung

Wilson Electronics

Wilson Electronics AG Pro Quint 461104 Bedienungsanleitung

Wilson Electronics

Wilson Electronics WilsonPro Single Room Bedienungsanleitung

Wilson Electronics

Wilson Electronics DT4G 460101 Bedienungsanleitung

Wilson Electronics

Wilson Electronics 463005 Bedienungsanleitung

Wilson Electronics

Wilson Electronics weBoost DRIVE X Bedienungsanleitung

Beliebte Extender Handbücher anderer Marken

SY HDBT-60T Bedienungsanleitung

Appsys ProAudio

Appsys ProAudio ADX-16 Bedienungsanleitung

Atlona

Atlona RS232 Bedienungsanleitung

IDK

IDK OPF-TH1000-A Bedienungsanleitung

Enable-IT

Enable-IT 824WP Bedienungsanleitung

Worx

Worx Landroid RadioLink WA0864 Technisches Datenblatt

TP-Link

TP-Link TL-WA730RE Bedienungsanleitung

Camplex

Camplex CMX-HDMI-SFPL Bedienungsanleitung

SC&T

SC&T HE03-4K Bedienungsanleitung

Marmitek

Marmitek MegaView70 Bedienungsanleitung

Samsung

Samsung SCS-26UC4 Bedienungsanleitung

Foxun

Foxun SX-GES24 Bedienungsanleitung

MuxLab

MuxLab 500771 Bedienungsanleitung

foxunhd

foxunhd SX-AEX01 Bedienungsanleitung

TERK Technologies

TERK Technologies LFIRX2 Bedienungsanleitung

Devolo

Devolo Audio Extender Handbuch

Edimax

Edimax EW-7438RPn V2 Bedienungsanleitung

Shinybow USA

Shinybow USA SB-6335T5 Bedienungsanleitung