Wilson Electronics WILSON PRO 4000R Bedienungsanleitung

NEED HELP? wilsonelectronics.com 866.294.1660

User Manual

In-Building Multi-Antenna Signal Booster

With Extended Dynamic Range

WILSON PRO

4000R

A WILSON ELECTRONICS, LLC COMPANY

Package Content 1

Key Features 3

Competitive Advantages 4

Installation Diagram 5

Post Install Setup 6

Status Screen 7

Port/Band Status Screens 9

Enable/Disable Ports 12

Safety Guidelines 13

Warranty 16

_____

Index

IN-BUILDING MULTI-ANTENNA SIGNAL BOOSTER

WILSON PRO

4000R

________

Package

Content

WilsonPro

4000R

WilsonPro

4000R

2’ Wilson

400

2’ Wilson

400

Lightning Surge

Protector

Lightning Surge

Protector

Wide Band Directional

Antenna + 75’ Wilson

400

Wide Band Directional

Antenna + 75’ Wilson

400

4 Qty. Dome

Antenna + 4 Qty. 75’

Wilson 400

4 Qty. Wide Band Panel

Antenna + 4 Qty. 75’

Wilson 400

Kit 460231

Kit 460123

2IN-BUILDING MULTI-ANTENNA SIGNAL BOOSTER

WILSON PRO

4000R

The WilsonPro 4000R is the ﬁrst rack mounted, cell booster to incorporate four

separate signal ampliﬁers feeding multiple indoor antennas. The 4000R literally

delivers the power of four boosters in a single rack mount unit, and provides cell

coverage for up to 100,000 square feet of indoor space, or even more depending on

the strength of the incoming signal from the tower.

Designed to provide enhanced in-building cellular coverage for all commercial

spaces, including hospitals, hotels, warehouses and oces, the WilsonPro 4000R

ampliﬁes weak cell signals to provide reliable voice and data coverage – including 4G

– to inside spaces where signals may not penetrate. Adjustable uplink and downlink

gain controls on each band make it easy to customize the cell phone booster for any

speciﬁc signal environment.

Like all WilsonPro cellular signal boosters, the WilsonPro 4000R features cell

site protections that auto-detect and prevent any cell tower interference. Wilson

Electronics quality and an industry-leading three-year warranty make the 4000R a

clear choice for the professional technology integrator.

_______________

WilsonPro 4000R

IN-BUILDING MULTI-ANTENNA SIGNAL BOOSTER

WILSON PRO

4000R

Easy rack-mounted installation: The 4000R is intended to ﬁt into

an existing server rack. This design allows for a neat and clean

installation while leaving the unit easily accessible.

Onboard Software for Better Control: Each indoor antenna path is

independently and automatically controlled with onboard software,

ensuring great connectivity throughout large spaces and multi-story

buildings. Since all ports are independently controlled, each can

adjust its gain level up or down as required by the conditions of the

immediate signal environment without disrupting coverage from any

other antenna.

Extra Dynamic Range (XDR) for continuous connectivity: Gives

the 4000R much greater tolerance than any competing booster for

a strong incoming signal from the tower. XDR lets the 4000R system

work with an incoming signal up to 10 dB stronger than any competing

booster can tolerate, before overloading and shutting down.

Color LCD for Easier Access: Unlike other boosters, the Wilson

4000R has a color LCD screen with four-way navigation, allowing

integrators to have easy and eective control of the product.

____________

Key Features

4IN-BUILDING MULTI-ANTENNA SIGNAL BOOSTER

WILSON PRO

4000R

Highest Downlink Power: Up to +12dB more downlink power than

the competition allows for stronger signal in environments where

the incoming signal is weak,. The beneﬁt is a stronger signal sent to

the inside antennas, providing larger coverage area from a single

booster.

Highest Uplink Power: This allows for a stronger signal transmitted

to the tower, up to +3dB more than the competition, providing greater

user capacity and increased range from the cell site.

Lower Overload and Shutdown Threshold: This allows the booster

to work with a stronger incoming signal, up to +10dB stronger, before

overloading and shutting down. This is a huge beneﬁt in strong signal

environments like cities and locations close to a carrier tower.

Intelligent Control: WilsonPro cellular boosters automatically adjust

signal gain while still providing even signal coverage throughout the

building.

Sophisticated Software: Cellular signals are constantly ﬂuctuating.

The software is always monitoring signal levels and making imme-

diate adjustments as needed, allowing the booster to operate at

maximum gain consistently.

___________

Competitive

Advantages

IN-BUILDING MULTI-ANTENNA SIGNAL BOOSTER

WILSON PRO

4000R

__________

Installation

Diagram

Outside Directional

Antenna

Inside Dome

Antenna(s)

6IN-BUILDING MULTI-ANTENNA SIGNAL BOOSTER

WILSON PRO

4000R

__________

Post Install

Setup

The WilsonPRO 4000R is designed with advanced internal programming, which allows

it to automatically adjust for a variety of conditions, while still boosting weak signals.

Once the AC power cable and antenna cables are connected, turn the unit on by

toggling the power switch located near the AC power receptacle, located at the rear

of the unit.

Power Switch

IN-BUILDING MULTI-ANTENNA SIGNAL BOOSTER

WILSON PRO

4000R

After the WilsonPRO splash screen appears for a few seconds, the status screen,

showing the ampliﬁcation status of each port and band, will appear.

A solid green light indicates that a

band/port is operating correctly with

maximum allowable gain.

A yellow light with a red slash indicates

that gain for that band/port has been

reduced due to a detected oscillation

condition. Oscillation is caused by

insucient isolation (separation and

direction) between the outdoor (donor)

antenna and one or more indoor

antennas, for indicated band port. The

ampliﬁer IS working, but overall system

gain has been reduced. If indoor

coverage is insucient, attempt to

increase antenna isolation (separation

and direction).

____________

Status Screen

Lights Description

8IN-BUILDING MULTI-ANTENNA SIGNAL BOOSTER

WILSON PRO

4000R

________

(LIGHTS DESCRIPTION cont.)

A solid yellow light indicates band/

port gain has been reduced because

of the oscillation condition detected at

a nearby band/port. Once the antenna

isolation (separation and direction) is

corrected at the indicated port(s), the

solid yellow light will change to green.

A red light indicates a band/port for

which has been completely shut

down by the ampliﬁer’s internal

microprocessor. If the ampliﬁer is

correctly installed, this should not

occur. Contact WilsonPRO technical

support if you see a red light.

Inhaltsverzeichnis

Andere Wilson Electronics Extender Handbücher

Wilson Electronics

Wilson Electronics MobileMaxx 3G 460011 Bedienungsanleitung

Wilson Electronics

Wilson Electronics Mobile 4G 460021 Bedienungsanleitung

Wilson Electronics

Wilson Electronics weboost 472061 Bedienungsanleitung

Wilson Electronics

Wilson Electronics Tri-Band 4G-C Bedienungsanleitung

Wilson Electronics

Wilson Electronics 277380 Bedienungsanleitung

Wilson Electronics

Wilson Electronics PRO 70 PLUS SELECT Bedienungsanleitung

Wilson Electronics

Wilson Electronics WILSON PRO 1050 Bedienungsanleitung

Wilson Electronics

Wilson Electronics 801105 Bedienungsanleitung

Wilson Electronics

Wilson Electronics Sleek 4G Bedienungsanleitung

Wilson Electronics

Wilson Electronics AWS 70 Bedienungsanleitung

Wilson Electronics

Wilson Electronics Tri-Band 4G-A Bedienungsanleitung

Wilson Electronics

Wilson Electronics SLEEK 2B5225 Bedienungsanleitung

Wilson Electronics

Wilson Electronics 271265 Bedienungsanleitung

Wilson Electronics

Wilson Electronics AG Pro 75 Bedienungsanleitung

Wilson Electronics

Wilson Electronics weboost Office 100 Bedienungsanleitung

Wilson Electronics

Wilson Electronics 4000R Bedienungsanleitung

Wilson Electronics

Wilson Electronics SIGNALBOOST 811210 Bedienungsanleitung

Wilson Electronics

Wilson Electronics weBoost DRIVE X RV Bedienungsanleitung

Wilson Electronics

Wilson Electronics weBoost DRIVE X Bedienungsanleitung

Wilson Electronics

Wilson Electronics Tri-Band 4G-V Bedienungsanleitung

Wilson Electronics

Wilson Electronics AG Pro 75 Bedienungsanleitung

Wilson Electronics

Wilson Electronics WilsonPro A1000 Bedienungsanleitung

Wilson Electronics

Wilson Electronics weBoost DRIVE X 475021R Bedienungsanleitung

Wilson Electronics

Wilson Electronics weboost Drive Reach OTR Installationsanleitung

Beliebte Extender Handbücher anderer Marken

SY HDBT-60T Bedienungsanleitung

Appsys ProAudio

Appsys ProAudio ADX-16 Bedienungsanleitung

Atlona

Atlona RS232 Bedienungsanleitung

IDK

IDK OPF-TH1000-A Bedienungsanleitung

Enable-IT

Enable-IT 824WP Bedienungsanleitung

Worx

Worx Landroid RadioLink WA0864 Technisches Datenblatt

TP-Link

TP-Link TL-WA730RE Bedienungsanleitung

Camplex

Camplex CMX-HDMI-SFPL Bedienungsanleitung

SC&T

SC&T HE03-4K Bedienungsanleitung

Marmitek

Marmitek MegaView70 Bedienungsanleitung

Samsung

Samsung SCS-26UC4 Bedienungsanleitung

Foxun

Foxun SX-GES24 Bedienungsanleitung

MuxLab

MuxLab 500771 Bedienungsanleitung

foxunhd

foxunhd SX-AEX01 Bedienungsanleitung

TERK Technologies

TERK Technologies LFIRX2 Bedienungsanleitung

Devolo

Devolo Audio Extender Handbuch

Edimax

Edimax EW-7438RPn V2 Bedienungsanleitung

Shinybow USA

Shinybow USA SB-6335T5 Bedienungsanleitung