Wilson Electronics WILSON PRO 4000 Bedienungsanleitung

In-Building Multi-Antenna Signal Booster

With Extended Dynamic Range

WILSON PRO

4000

A Wilson Electronics Brand

wilsonpro.com 866.294.1660

User Manual

ENGLISH FRANÇAIS

Package Content

About The WilsonPro 4000

Key Features

Competitive Advantages

Post Install Setup

Status Screen

Port/Band Status Screens

Enable/Disable Ports

Safety Guidelines

Warranty

Index

WILSON PRO 4000 IN-BUILDING MULTI-ANTENNA SIGNAL BOOSTER EN

Package

Content

WilsonPro

4000

2’ Wilson

400

Lightning Surge

Protector

Wide Band Directional

Antenna + 75’

Wilson 400 Cable

4 Qty. Dome

Antenna + 4 Qty. 100’

Wilson 400 Cable

Kit 460223

2IN-BUILDING MULTI-ANTENNA SIGNAL BOOSTER WILSON PRO 4000

Easy Installation

Neat and clean installation while leaving

the unit easily accessible.

Onboard Software For

Better Control

Each indoor antenna path is

independently and automatically

controlled with onboard software,

ensuring great connectivity throughout

large spaces and multi-story buildings.

Color LCD For Easier

Access

Unlike other boosters, the WilsonPro

4000 has a color LCD screen

with four-way navigation, allowing

integrators to have easy and eective

control of the product.

Extended Dynamic

Range For Continuous

Connectivity

XDR allows the booster to never shutdown

due to too strong of a signal. No matter how

strong, the booster will never overpower and

shutdown.

WilsonPro 4000

WILSON PRO 4000 IN-BUILDING MULTI-ANTENNA SIGNAL BOOSTER EN

The WilsonPro 4000 incorporates four

separate signal ampliﬁers feeding multiple

indoor antennas. The 4000 literally delivers

the power of four boosters in a single mount

unit, and provides cell coverage for up to

100,000 square feet of indoor space, or

even more depending on the strength of the

incoming signal from the tower.

Designed to provide enhanced in-building cellular coverage for commercial and large

residential spaces, the WilsonPro 4000 ampliﬁes weak cell signals to provide reliable

voice and data coverage – including 4G – to inside spaces where signals

may not penetrate.

Like all WilsonPro cellular signal boosters, the WilsonPro 4000 features cell site

protections that auto-detect and prevent any cell tower interference. Wilson

Electronics quality and an industry-leading three-year warranty make the 4000 a clear

choice for the professional technology integrator.

The 4000 Literally Delivers The Power Of Four Boosters

4IN-BUILDING MULTI-ANTENNA SIGNAL BOOSTER WILSON PRO 4000

Easy installation: The 4000 is intended to ﬁt into an existing server

rack. This design allows for a neat and clean installation while leaving

the unit easily accessible.

Onboard Software for Better Control: Each indoor antenna path is

independently and automatically controlled with onboard software,

ensuring great connectivity throughout large spaces and multi-story

buildings. Since all ports are independently controlled, each can

adjust its gain level up or down as required by the conditions of the

immediate signal environment without disrupting coverage from any

other antenna.

Extended Dynamic Range (XDR) for continuous connectivity: Gives

the 4000 much greater tolerance than any competing booster for a

strong incoming signal from the tower. XDR lets the 4000 system work

with an incoming signal stronger than any competing booster and

never shuts down due to a strong outside signal.

Color LCD for Easier Access: Unlike other boosters, the Wilson 4000

has a color LCD screen with four-way navigation, allowing integrators

to have easy and eective control of the product.

Key Features

WILSON PRO 4000 IN-BUILDING MULTI-ANTENNA SIGNAL BOOSTER EN

Highest Downlink Power: Up to +12dB more downlink power than

the competition allows for stronger signal in environments where

the incoming signal is weak. The beneﬁt is a stronger signal sent to

the inside antennas, providing larger coverage area from a single

booster.

Highest Uplink Power: This allows for a stronger signal transmitted

to the tower, up to +3dB more than the competition, providing greater

user capacity and increased range from the cell site.

Lower Overload and Shutdown Threshold: No matter how strong

the outside signal, the WilsonPro 4000 never shuts down. This is a

huge beneﬁt in strong signal environments like cities and locations

close to a carrier tower.

Intelligent Control: WilsonPro cellular boosters automatically adjust

signal gain while still providing even signal coverage throughout the

building.

Sophisticated Software: Cellular signals are constantly ﬂuctuating.

The software is always monitoring signal levels and making

immediate adjustments as needed, allowing the booster to operate at

maximum gain consistently.

Competitive

Advantages

6IN-BUILDING MULTI-ANTENNA SIGNAL BOOSTER WILSON PRO 4000

Outside

Directional

Antenna

Inside Dome

Antenna(s)

to power

power

Lightning

Surge Protector

Installation

Diagram

Simple wall-mount

installation.

The direction of the

outside antenna should

be adjusted until the

“DL” bar is maximized.

A Wilson Lightning Surge Protector is recommended for all building installations. Make

sure the protector is installed outside the building at point of entry connected to a

suitable ground and in line between the Outside Antenna and the Signal Booster.

WILSON PRO 4000 IN-BUILDING MULTI-ANTENNA SIGNAL BOOSTER EN

Post Install

Setup

The WilsonPRO 4000 is designed with advanced internal programming, which allows

it to automatically adjust for a variety of conditions, while still boosting weak signals.

Once the AC power cable and antenna cables are connected, turn the unit on by tog-

gling the power switch located near the AC power receptacle.

8IN-BUILDING MULTI-ANTENNA SIGNAL BOOSTER WILSON PRO 4000

The 4000 takes about 20 seconds to boot up. Once boot up is complete, the status

screen will appear, showing the ampliﬁcation and status of each port and band.

A solid green light indicates that a

band/port is operating correctly with

maximum allowable gain.

A solid yellow light indicates band/

port gain reduction because of an

oscillation condition. Reposition

antennas (more separation between

indoor and outdoor antennas, and

pointed in opposite directions)

and reboot (power cycle) the 4000

for maximum performance. When

adequate separation is achieved, the

yellow lights will return to green upon

reboot. Note that when the light is

yellow, the band/port is operational;

however, performance is reduced.

Status Screen

System Status Screen

Splash Screen

Lights Description

Inhaltsverzeichnis

Sprachen:

Andere Wilson Electronics Extender Handbücher

Wilson Electronics

Wilson Electronics Signal 3G Bedienungsanleitung

Wilson Electronics

Wilson Electronics weBoost Connect 4G-X 471104R Bedienungsanleitung

Wilson Electronics

Wilson Electronics 277380 Bedienungsanleitung

Wilson Electronics

Wilson Electronics Tri-Band 4G-A Bedienungsanleitung

Wilson Electronics

Wilson Electronics 460006 Bedienungsanleitung

Wilson Electronics

Wilson Electronics Sleek Bedienungsanleitung

Wilson Electronics

Wilson Electronics 271265 Bedienungsanleitung

Wilson Electronics

Wilson Electronics DB Pro 4G Bedienungsanleitung

Wilson Electronics

Wilson Electronics 460061 Bedienungsanleitung

Wilson Electronics

Wilson Electronics weBoost DRIVE 4G-X 470510R Bedienungsanleitung

Wilson Electronics

Wilson Electronics SLEEK 2B5225 Bedienungsanleitung

Wilson Electronics

Wilson Electronics weboost DRIVE REACH FLEET Bedienungsanleitung

Wilson Electronics

Wilson Electronics SLEEK 2B5225 Bedienungsanleitung

Wilson Electronics

Wilson Electronics MobileMaxx 3G 460011 Bedienungsanleitung

Wilson Electronics

Wilson Electronics AWS 70 Bedienungsanleitung

Wilson Electronics

Wilson Electronics Pro 70 Plus Bedienungsanleitung

Wilson Electronics

Wilson Electronics IoT 5-Band Bedienungsanleitung

Wilson Electronics

Wilson Electronics weBoost Drive Reach RV Bedienungsanleitung

Wilson Electronics

Wilson Electronics weboost DRIVE REACH Bedienungsanleitung

Wilson Electronics

Wilson Electronics 2B1216 Bedienungsanleitung

Wilson Electronics

Wilson Electronics DB Pro 271265 Bedienungsanleitung

Wilson Electronics

Wilson Electronics WilsonPro A1000 Bedienungsanleitung

Wilson Electronics

Wilson Electronics weboost DRIVE REACH OTR FLEET Bedienungsanleitung

Wilson Electronics

Wilson Electronics weboost Office 100 Bedienungsanleitung

Beliebte Extender Handbücher anderer Marken

SY HDBT-60T Bedienungsanleitung

Appsys ProAudio

Appsys ProAudio ADX-16 Bedienungsanleitung

Atlona

Atlona RS232 Bedienungsanleitung

IDK

IDK OPF-TH1000-A Bedienungsanleitung

Enable-IT

Enable-IT 824WP Bedienungsanleitung

Worx

Worx Landroid RadioLink WA0864 Technisches Datenblatt

TP-Link

TP-Link TL-WA730RE Bedienungsanleitung

Camplex

Camplex CMX-HDMI-SFPL Bedienungsanleitung

SC&T

SC&T HE03-4K Bedienungsanleitung

Marmitek

Marmitek MegaView70 Bedienungsanleitung

Samsung

Samsung SCS-26UC4 Bedienungsanleitung

Foxun

Foxun SX-GES24 Bedienungsanleitung

MuxLab

MuxLab 500771 Bedienungsanleitung

foxunhd

foxunhd SX-AEX01 Bedienungsanleitung

TERK Technologies

TERK Technologies LFIRX2 Bedienungsanleitung

Devolo

Devolo Audio Extender Handbuch

Edimax

Edimax EW-7438RPn V2 Bedienungsanleitung

Shinybow USA

Shinybow USA SB-6335T5 Bedienungsanleitung