Windsor ROMBUS RMBS12 Bedienungsanleitung

Operating Instructions (ENG)

MODELS: RMBS12 BEFORE S/N12236

RMBS16 BEFORE S/N 16905

Read instructions before operating the machine.

980124 09/20/05

MACHINE DATA LOG/OVERVIEW

ROMBUS 980124 07/02/03

For the name and address of your dealer contact: Windsor Industries

YOUR DEALER

Name: __________________________________________________________________________________________________

Address: _______________________________________________________________________________________________

Phone Number: _________________________________________________________________________________________

MODEL _______________________________________

DATE OF PURCHASE __________________________

SERIAL NUMBER ______________________________

SALES REPRESENTATIVE # _____________________

DEALER NAME ________________________________

OPERATIONS GUIDE NUMBER ___________________

PUBLISHED __________________________________________

OVERVIEW

The Windsor Rombus Carpet Maintainer is designed to maintain your carpet using the Rombus

quick clean, quick dry carpet care system. The machine has two counter rotating brushes that help

scrub chemical into the carpet. The chemical, Red Carpet Rombus Carpet Clean Chemical,

encapsulates the dirt, allowing both to be vacuumed up once the chemical has dried. The brushes

also help to raise the pile of the carpet, giving it a lush groomed appearance.

TABLE OF CONTENTS

ROMBUS 980124 07/02/03

Machine Data Log/Overview.......................2

Table of Contents........................................3

HOW TO USE THIS MANUAL

How to use this Manual...............................1-1

SAFETY

Important Safety Instructions......................2-1

Hazard Intensity Level................................2-2

Grounding Instructions................................2-3

OPERATIONS

Technical Specifications.............................3-1

How the Machine Works.............................3-2

Machine Operation......................................3-3

Pre-run Inspection...............................3-3

Starting Machine..................................3-3

Machine Shut-down and Storage........3-3

MAINTENANCE

Brush Cleaning and Maintenance...............4-1

Machine Maintenance.................................4-1

Daily Maintenance...............................4-1

Periodic Maintenance..........................4-1

Annual Maintenance............................4-1

Machine Troubleshooting............................4-2

GROUP PARTS LIST

Handle Group..............................................5-1

Base - Motor Group....................................5-3

Base - Brush Group....................................5-5

Notes...........................................................5-7

Warranty.....................................................5-8

HOW TO USE THIS MANUAL

ROMBUS 980124 07/02/03

1-1

This manual contains the following sections:

-HOW TO USE THIS MANUAL

-SAFETY

-OPERATIONS

-MAINTENANCE

-PARTS LIST

The HOW TO USE THIS MANUAL section will tell

you how to find important information for ordering

correct repair parts.

Parts may be ordered from authorized Windsor

dealers. When placing an order for parts, the

machine model and machine serial number are

important. Refer to the MACHINE DATA box which

is filled out during the installation of your machine.

The MACHINE DATA box is located on the inside

of the front cover of this manual.

The model and serial number of your machine is

on the operator’s left hand side, side panel of

base.

The SAFETY section contains important

information regarding hazard or unsafe practices

of the machine. Levels of hazards is identified that

could result in product or personal injury, or severe

injury resulting in death.

The OPERATIONS section is to familiarize the

operator with the operation and function of the

machine.

The MAINTENANCE section contains preventive

maintenance to keep the machine and its

components in good working condition.

The PARTS LIST section contains assembled

parts illustrations and corresponding parts list. The

parts lists include a number of columns of

information:

-REF – column refers to the reference

number on the parts illustration.

-PART NO. – column lists the part

number for the part.

-QTY – column lists the quantity of the

part used in that area of the machine.

-DESCRIPTION – column is a brief

description of the part.

-SERIAL NO. FROM – column

indicates the first machine the part

number is applicable to. When the

machine design has changed, this

column will indicate serial number of

applicable machine. The main

illustration shows the most current

design of the machine. The boxed

illustrations show older designs. If

column has an asterisk (*), call

manufacturer for serial number.

-NOTES – column for information not

noted by the other columns.

NOTE: If a service or option kit is installed on your

machine, be sure to keep the KIT INSTRUCTIONS

which came with the kit. It contains replacement

parts numbers needed for ordering future parts.

NOTE: The 98# on the lower left corner of the front

cover is the part number for this manual.

MODEL _____________________________________

DATE OF PURCHASE ________________________

SERIAL NUMBER ____________________________

SALES REPRESENTATIVE # ___________________

DEALER NAME ______________________________

OPERATIONS GUIDE NUMBER __________________

PUBLISHED ________________________________

ROMBUS 980124 07/02/03 2-1

IMPORTANT SAFETY INSTRUCTIONS

When using an electrical appliance, basic precaution

must always be followed, including the following:

READ ALL INSTRUCTIONS BEFORE USING THIS MACHINE.

This machine is for commercial use.

To reduce the risk of fire, electric shock, or injury:

Connect to a properly grounded outlet. See Grounding Instructions.

Do not leave the machine unattended. Unplug machine from outlet when not in use and before

maintenance or service.

Do not allow machine to be used as a toy. Close attention is necessary when used by or near

children.

Use only as described in this manual. Use only manufacturer’s recommended components and

attachments.

Do not use damaged electrical cord or plug. Follow all instructions in this manual concerning

grounding the machine. If the machine is not working properly, has been dropped, damaged, left

outdoors, or dropped into water, return it to an authorized service center.

Do not pull or carry machine by electrical cord, use as a handle, close a door on cord, or pull cord

around sharp edges or corners.

Do not run machine over cord or allow the rotating brushes to come in contact with the cord. Keep

cord away from heated surfaces.

Do not unplug machine by pulling on cord. To unplug, grasp the electrical plug, not the electrical

cord.

Always use cable restraint provided and wind the cable around the cable holder on the handle. For

quick release of the electrical cable rotate the cable holder 180 degrees.

Do not handle the electrical plug or machine with wet hands.

Do not operate the machine with any openings blocked. Keep openings free of debris that may

reduce airflow.

Machine is designed for indoor use only and must not be operate or stored outdoors in wet

conditions.

Turn off all controls before unplugging.

Machine can cause a fire when operating near flammable vapors or materials. Do not operate this

machine near flammable fluids, dust or vapors.

Only the brushes provided with the machine or those specified by the manufacturer can be used.

The intended use of the brushes is specifically for the cleaning of carpeting and should not be used

in any other way.

This machine is suitable for commercial use, for example in hotels, schools, hospitals,

factories, shops and offices for more than normal housekeeping purposes.

Maintenance and repairs must be done by qualified personnel.

SAVE THESE INSTRUCTIONS

WARNING:

HAZARD INTENSITY LEVEL

ROMBUS 980124 07/02/03 2-2

The following symbols are used throughout this guide as indicated in their descriptions:

HAZARD INTENSITY LEVEL

There are three levels of hazard intensity identified by signal words -WARNING and CAUTION and FOR

SAFETY. The level of hazard intensity is determined by the following definitions:

WARNING - Hazards or unsafe practices which COULD result in severe personal injury or death.

CAUTION - Hazards or unsafe practices which could result in minor personal injury or product or

property damage.

FOR SAFETY: To Identify actions which must be followed for safe operation of equipment.

Report machine damage or faulty operation immediately. Do not use the machine if it is not in proper

operating condition. Following is information that signals some potentially dangerous conditions to the

operator or the equipment. Read this information carefully. Know when these conditions can exist.

Locate all safety devices on the machine. Please take the necessary steps to train the machine

operating personnel.

FOR SAFETY:

DO NOT OPERATE MACHINE:

Unless Trained and Authorized.

Unless Operation Guide is Read and understood.

In Flammable or Explosive areas.

In areas with possible falling objects.

WHEN SERVICING MACHINE:

Avoid moving parts. Do not wear loose clothing; jackets, shirts, or sleeves when working on the

machine. Use Windsor approved replacement parts.

WARNING

!CAUTION

GROUNDING INSTRUCTIONS

ROMBUS 980124 07/02/03 2-3

THIS PRODUCT IS FOR COMMERCIAL

USE ONLY.

ELECTRICAL:

In the USA this machine operates on a

standard 15 amp 115V, 60 hz, A.C. power

circuit . The amp, hertz, and voltage are listed

on the data label found on each machine.

Using voltages above or below those

indicated on the data label will cause serious

damage to the motors.

EXTENSION CORDS:

If an extension cord is used, the wire size

must be at least one size larger than the

power cord on the machine, and must be

limited to 50 feet (15.5m) in length.

GROUNDING INSTRUCTIONS:

This appliance must be grounded. If it should

malfunction or break down, grounding

provides a path of least resistance for electric

current to reduce the risk of electric shock.

This appliance is equipped with a cord having

an equipment-grounding conductor and

grounding plug. The plug must be inserted

into an appropriate outlet that is properly

installed and grounded in accordance with all

local codes and ordinances.

This appliance is for use on a nominal 120-

volt circuit, and has a grounded plug that

looks like the plug in “Fig. A”. A temporary

adaptor that looks like the adaptor in “Fig . C”

may be used to connect this plug to a 2-pole

receptacle as shown in “Fig. B”, if a properly

grounded outlet is not available. The

temporary adaptor should be used only until a

properly grounded outlet (Fig. A) can be

installed by a qualified electrician. The green

colored rigid ear, lug, or wire extending from

the adaptor must be connected to a

permanent ground such as a properly

grounded outlet box cover. Whenever the

adaptor is used, it must be held in place by a

metal screw.

Improper connection of the equipment-

grounding conductor can result in a risk of

electric shock. Check with a qualified

electrician or service person if you are in

doubt as to whether the outlet is properly

grounded. Do not modify the plug

provided with the appliance - if it will not fit

the outlet, have a proper outlet installed by

a qualified electrician.

TECHNICAL SPECIFICATIONS

ROMBUS 980124 07/02/03 3-1

ITEM DIMENSION/CAPACITY

Electrical 115V

Nominal Power 550W

Rated Amperage 7 Amps

Brush Width

-RMBS12

-RMBS16 12 inches (30 cm)

16 inches (40 cm)

Brush RPM 600 RPM

Wheels 3 inches (7.5 cm) non-marking grey

Dimensions – Weight

-RMBS12

-RMBS16 40 lbs. (18kg)

44 lbs. (20kg)

Dimensions – Height

-with handle 44 inches (112 cm)

Dimensions – Depth 12 inches (30 cm)

Power Cord 33 feet (10 m)

HOW THE MACHINE WORKS

ROMBUS 980124 07/02/03 3-2

Congratulations!

You are now the proud owner of a Windsor

Rombus Carpet Maintainer.

The Windsor Rombus Carpet Maintainer is

designed to maintain your carpet using the

Rombus Quick Clean, Quick Dry Carpet Care

System. By using the Rombus Carpet Maintainer

in conjunction with Windsor Red Carpet Rombus

Carpet Clean (W145-4) chemical solution, you

can perform a regular light cleaning and grooming

of your carpet very quickly, and have the carpet

dry and ready for traffic within 30 minutes.

The Rombus machine handle detaches for easy

stair cleaning, transportation and compact

storage. The handle has a 180 degree movement

for maximum flexibility and allows the machine to

clean under low furniture. There is a foot

operated on/off switch and handle lock keeping

the handle in an upright position when placed in

the tray.

The tray is for machine storage when not in use.

This will protect the brush bristles from being

crushed.

The brush guard protects the machine brushes by

preventing loose threads or wires (telephone or

electrical) getting caught-up in the brushes.

This appliance conforms with international and

national safety directives: EN55014-2, EN5504-1,

EN61000-3-2/3-3, EN60335-1/2-10/2-69/2-67.

IEC 60335-1/2/10/2-67/2-69. LVD 73/23/EEC.

The Windsor Rombus Maintainer comes with a

one year warranty on all parts except for cords,

switch, gears, capacitors and brushes. See

Windsor New Machine Warranty Policy, product

section labeled “Airmover/Dri-matic/Titan”, for

more detail.

MACHINE OPERATION

ROMBUS 980124 07/02/03 3-3

PRE-RUN MACHINE INSPECTION

Perform a pre-run inspection to find possible

problems that could cause poor performance or

lost time from breakdown. Check the rating plate

to confirm voltage and frequency is the same as

the power supply. NOTE: A 10% variation in

voltage is acceptable.

STARTING MACHINE

NOTE: Perform pre-run machine check before

operating machine.

FOR SAFETY: Before starting machine, make

sure that all covers are in place and secured

properly.

1. Connect the machine to a power supply.

2. Take the machine out of the tray. Do this by

leaning the machine back and wheeling

away from the tray. NOTE: Place the tray

out of the way when machine in use.

3. Release the handle lock.

4. Depress the foot switch to engage machine.

After applying a light spray of diluted Red

Carpet Rombus Carpet Clean onto the carpet

using a pressurized tank sprayer, commence

cleaning by pushing and pulling the machine

slowly over the wetted carpet.

Best results are obtained by moving the

machine in multiple directions and overlapping

strokes.

Flammable materials can cause an explosion

or fire. Do not use flammable materials with

this machine.

MACHINE SHUT-DOWN AND

STORAGE

1. Depress the foot switch to power off

machine.

2. Lock handle in the upright position.

3. Disconnect the power cord from the power

supply. Wind the power cord around the

cable holder on the handle.

4. Remove the brushes for cleaning. See

Brush Cleaning and Maintenance section.

5. Once daily maintenance has been

performed, place the machine back into the

tray.

The machine is now ready for storage until the

next use. Make sure to store your equipment in

a dry place to prolong the life of your machine.

Storage outdoors or unprotected could cause

damage to your machine or internal parts,

therefore voiding your warranty.

When not in use or during interrupted cleaning,

the machine must always be placed in the tray

provided to prevent deformation of the brush

bristles. Deformation of brush bristles can

result in unbalanced running and excessive

vibrating or jumping.

!WARNING

!CAUTION

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Windsor Staubsauger Handbücher

Windsor

Windsor VS 14 Bedienungsanleitung

Windsor

Windsor PRS2 Bedienungsanleitung

Windsor

Windsor IM Technische Daten

Windsor

Windsor SENSOR S12 Bedienungsanleitung

Windsor

Windsor Saber Compact 22 Bedienungsanleitung

Windsor

Windsor CV24 Technische Daten

Windsor

Windsor SRXP12 10120240 Bedienungsanleitung

Windsor

Windsor CV86LI Bedienungsanleitung

Windsor

Windsor VERSAMATIC VS14 Bedienungsanleitung

Windsor

Windsor Dri-Matic Bedienungsanleitung

Windsor

Windsor NORTHWIND NWB 86284220 Bedienungsanleitung

Windsor

Windsor AXCESS 12 Bedienungsanleitung

Windsor

Windsor Sensor XP 12 Bedienungsanleitung

Windsor

Windsor IMX Bedienungsanleitung

Windsor

Windsor VERSAMATIC 10120340 Bedienungsanleitung

Windsor

Windsor Sensor SRXP18I Bedienungsanleitung

Windsor

Windsor Sensor SR 15 Bedienungsanleitung

Windsor

Windsor CV34 Bedienungsanleitung

Windsor

Windsor Sensor SRXP12IA Technische Daten

Windsor

Windsor Sensor SRXP18 Bedienungsanleitung

Windsor

Windsor Chariot 3 - CV 86/1 RS Bp Bedienungsanleitung

Windsor

Windsor Sensor 10120220 Bedienungsanleitung

Windsor

Windsor Sensor SRS15 Bedienungsanleitung

Windsor

Windsor Sensor SRS12 Bedienungsanleitung

Beliebte Staubsauger Handbücher anderer Marken

Bissell

Bissell LittleGreen Proheat 1425 Series Bedienungsanleitung

Panasonic

Panasonic MC-YL637S147-AE Bedienungsanleitung

NEFF

NEFF N17XH10 0 Series Bedienungsanleitung

LG A9 Series Bedienungsanleitung

Oreck

Oreck Cordless Captura BK51700 Series Bedienungsanleitung

Kogan

Kogan KAVACROBVWA Bedienungsanleitung

Kränzle

Kränzle VENTOS 50 ID Benutzerhandbuch

EVVO

EVVO Ai35 Bedienungsanleitung

DeWalt

DeWalt DWH200D Bedienungsanleitung

Pontec

Pontec Pondomatic Vacuum Cleaner Bedienungsanleitung

Cleanmaxx

Cleanmaxx PC-P007E Bedienungsanleitung

Exido

Exido 240-114 Bedienungsanleitung

RIDGID

RIDGID WD1685AU0 Bedienungsanleitung

Ezviz

Ezviz RE4P Bedienungsanleitung

STG global

STG global TANVAC HDV3000 Bedienungsanleitung

Shark

Shark ROTATOR PRO COMPLETE NV550 Series Bedienungsanleitung

Factory

Factory M3340 Bedienungsanleitung

Shop-Vac

Shop-Vac VN92 SERIES Bedienungsanleitung