Windsor VWB Technische Daten

Operating Instructions (ENG)

MODELS: NWB

86284220

Read instructions before operating the machine.

86037530 –C 05/18/11

PRV NO. 980183

MACHINE DATA LOG

86037530 NWB 05/18/11

Warranty Registration

Thank you for purchasing a Windsor product. Warranty registration is quick and easy.

Your registration will allow us to serve you better over the lifetime of the product.

To register your product go to:

www.windsorind.com/WarrantyRegistration.aspx

For customer assistance:

1-800-444-7654

TABLE OF CONTENTS

86037530 NWB 04/07/08

Machine Data Log................................................2

Table of Contents.................................................3

HOW TO USE THIS MANUAL

How to use this Manual........................................1-1

SAFETY

Important Safety Instructions ...............................2-1

Hazard Intensity Level..........................................2-2

OPERATIONS

Technical Specifications.......................................3-1

Notes....................................................................3-1

Controls/Components. .........................................3-2

Maintenance.........................................................3-2

PARTS LIST

Spare Parts List....................................................4-1

Warranty...............................................................4-2

HOW TO USE THIS MANUAL

86037530 NWB 04/07/08

This manual contains the following sections:

-HOW TO USE THIS MANUAL

-SAFETY

-OPERATIONS

-PARTS LIST

The HOW TO USE THIS MANUAL section will tell

you how to find important information for ordering

correct repair parts.

Parts may be ordered from authorized Windsor

dealers. When placing an order for parts, the

machine model and machine serial number are

important. Refer to the MACHINE DATA log which is

filled out during the installation of your machine. The

MACHINE DATA log is located on the inside of the

front cover of this manual.

The serial number of your machine is located just

below the handle on the cord side.

The SAFETY section contains important information

regarding hazard or unsafe practices of the

machine. Levels of hazards is identified that could

result in product or personal injury, or severe injury

resulting in death.

The OPERATIONS section is to familiarize the

operator with the operation and function of the

machine.

The PARTS LIST section contains assembled parts

illustrations and corresponding parts list. The parts

lists include a number of columns of information:

-REF – column refers to the reference

number on the parts illustration.

-PART NO. – column lists the part

number for the part.

-PRV NO. - Reference No.

-QTY – column lists the quantity of the

part used in that area of the machine.

-DESCRIPTION – column is a brief

description of the part.

-SERIAL NO. FROM – If this column has

an (*) and a Reference number, see the

SERIAL NUMBERS page in the back of

your manual. If column has two asterisk

(**), call manufacturer for serial number.

The serial number indicates the first

machine the part number is applicable

to. The main illustration shows the most

current design of the machine. When a

boxed illustration is shown, it displays

the older design.

-NOTES – column for information not

noted by the other columns.

NOTE: If a service or option kit is installed on your

machine, be sure to keep the KIT INSTRUCTIONS

which came with the kit. It contains replacement

parts numbers needed for ordering future parts.

NOTE: The number on the lower left corner of the

front cover is the part number for this manual.

86037530 NWB 04/07/08 2-1

IMPORTANT SAFETY INSTRUCTIONS

When using an electrical appliance, basic precaution

must always be followed, including the following:

READ ALL INSTRUCTIONS BEFORE USING THIS MACHINE.

To reduce the risk of fire, electric shock, or injury:

Use only indoors. Do not use outdoors or expose to rain.

Use only as described in this manual. Use only manufacturer’s recommended components and attachments.

If the machine is not working properly, has been dropped, damaged, left outdoors, or dropped into water, return

it to an authorized service center.

Do not operate the machine with any openings blocked. Keep openings free of debris that may reduce airflow.

Machine can cause a fire when operating near flammable vapors or materials. Do not operate this machine near

flammable fluids, dust or vapors.

This machine is suitable for commercial use, for example in hotels, schools, hospitals, factories, shops

and offices for more than normal housekeeping purposes.

Maintenance and repairs must be done by qualified personnel.

The machine shall only be operated by instructed and authorized persons.

Do not handle the plug or machine with wet hands.

Do not unplug machine by pulling on cord. To unplug, grasp the plug, not the cord.

Do not use with damaged cord or plug. Follow all instructions in this manual concerning grounding the machine.

Do not pull or carry by cord, use cord as a handle, close a door on cord, or pull cord around sharp edges or

corners.

Do not pull/run machine over cord. Keep cord away from heated surfaces.

Connect to a properly grounded outlet. See Grounding Instructions.

Do not allow to be used as a toy. Close attention is necessary when used near children.

Do not leave the appliance when plugged in. Unplug from outlet when not in use or before servicing.

Turn off all controls before unplugging.

SAVE THESE INSTRUCTIONS

WARNING:

HAZARD INTENSITY LEVEL

86037530 NWB 04/07/08

2-2

The following symbols are used throughout this guide as indicated in their descriptions:

HAZARD INTENSITY LEVEL

There are three levels of hazard intensity identified by signal words -WARNING and CAUTION and FOR

SAFETY. The level of hazard intensity is determined by the following definitions:

WARNING - Hazards or unsafe practices which COULD result in severe personal injury or death.

CAUTION - Hazards or unsafe practices which could result in minor personal injury or product or property

damage.

FOR SAFETY: To Identify actions which must be followed for safe operation of equipment.

Report machine damage or faulty operation immediately. Do not use the machine if it is not in proper operating

condition. Following is information that signals some potentially dangerous conditions to the operator or the

equipment. Read this information carefully. Know when these conditions can exist. Locate all safety devices on

the machine. Please take the necessary steps to train the machine operating personnel.

FOR SAFETY:

DO NOT OPERATE MACHINE:

Unless Trained and Authorized.

Unless Operation Guide is Read and understood.

In Flammable or Explosive areas.

In areas with possible falling objects.

WHEN SERVICING MACHINE:

Avoid moving parts. Do not wear loose clothing; jackets, shirts, or sleeves when working on the

machine. Use Windsor approved replacement parts.

!WARNING

!CAUTION

GROUNDING INSTRUCTIONS

86037530 NWB 04/07/08 2-3

THIS PRODUCT IS FOR COMMERCIAL USE

ONLY.

ELECTRICAL:

In the USA this machine operates on a standard 15

amp 115V, 60 hz, A.C. power circuit. The amp,

hertz, and voltage are listed on the data label found

on each machine. Using voltages above or below

those indicated on the data label will cause serious

damage to the motors.

EXTENSION CORDS:

If an extension cord is used, the wire size must be at

least one size larger than the power cord on the

machine, and must be limited to 50 feet (15.5m) in

length.

GROUNDING INSTRUCTIONS:

This appliance must be grounded. If it should

malfunction or break down, grounding provides a

path of least resistance for electric current to reduce

the risk of electric shock. This appliance is equipped

with a cord having an equipment-grounding

conductor and grounding plug. The plug must be

inserted into an appropriate outlet that is properly

installed and grounded in accordance with all local

codes and ordinances.

This appliance is for use on a nominal 120-volt

circuit, and has a grounded plug that looks like the

plug in “Fig. A”. A temporary adaptor that looks like

the adaptor in “Fig. C” may be used to connect this

plug to a 2-pole receptacle as shown in “Fig. B”, if a

properly grounded outlet is not available. The

temporary adaptor should be used only until a

properly grounded outlet (Fig. A) can be installed by

a qualified electrician. The green colored rigid ear,

lug, or wire extending from the adaptor must be

connected to a permanent ground such as a

properly grounded outlet box cover. Whenever the

adaptor is used, it must be held in place by a metal

screw.

Improper connection of the equipment-

grounding conductor can result in a risk of

electric shock. Check with a qualified electrician

or service person if you are in doubt as to

whether the outlet is properly grounded. Do not

modify the plug provided with the appliance - if it

will not fit the outlet, have a proper outlet

installed by a qualified electrician.

TECHNICAL SPECIFICATIONS

86037530 NWB 04/07/08

3-1

ITEM DIMENSION/CAPACITY

Electrical 115Volt, 9.5 Amps, 60Hz

Electric Vacuum Motor Single Two Stage

Dimensions – Weight (with filter and hose assembly) 13 lbs (5.9 kg)

Dimensions – Length (W/O filter and hose assembly) 12 in. (30.5 cm)

Dimensions - Height 11.5 in. (29.2 cm)

Dimensions - Width 8.5 in. (21.6 cm)

Power Cable 9.5 ft. (2.4 m)

NOTES:

CONTROLS/COMPONENTS/MAINTENANCE

86037530 NWB 04/07/08 3-2

CONTROLS/COMPONENTS

1. Main Handle. Used to carry and move

machine.

2. Power Switch. Turns on blower motor.

3. Blower Port. Directs flow into Hose

assembly.

4. Filter. Keeps debris from the motor,

facilitates easy cleaning.

5. Shoulder Strap.

DAILY/REGULAR MAINTENANCE

Before making any adjustments or repairs to the

machine, disconnect the power cord from electrical

source.

Inspect all hoses, electrical cables and connections

on your machine. Frayed or cracked hoses should

be repaired or replaced to eliminate pressure loss.

If the cable insulation is broken or frayed, repair or

replace it immediately. Do not take chances with

electrical fire or shock.

Remove lint, dirt or debris build-up from filter. This

will give your motor added life. Added build-up may

decrease blower performance and/or damage your

motor.

SPARE PARTS LIST

86037530 NWB 04/07/08

4-1

REF PART NO. PRV NO. QTY DESCRIPTION SERIAL NO.

FROM NOTES:

1 86161330 34423 1 FILTER, NWB

2 86161350 730287 1 STRAP ASM, NWB COMPLETE

3 86161340 39701 1 HOSE ASM, NWB COMPLETE

4 86244120 500848 1 LABEL, NORTHWIND NOT SHOWN

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Windsor Staubsauger Handbücher

Windsor

Windsor Sensor 10120300 Bedienungsanleitung

Windsor

Windsor SRXP12 10120240 Bedienungsanleitung

Windsor

Windsor RECOVER 18 Bedienungsanleitung

Windsor

Windsor Wave WAV 10125050 Bedienungsanleitung

Windsor

Windsor Sensor SR 15 Bedienungsanleitung

Windsor

Windsor NW Bedienungsanleitung

Windsor

Windsor Sensor SRS12 Bedienungsanleitung

Windsor

Windsor Carpet Maintainer IMIE17 10066550 Bedienungsanleitung

Windsor

Windsor Sensor XP 18 Bedienungsanleitung

Windsor

Windsor Sensation SX2 Bedienungsanleitung

Windsor

Windsor Recover 7 Bedienungsanleitung

Windsor

Windsor AXCESS 12 1.012-061.0 Bedienungsanleitung

Windsor

Windsor Sensor SRXP18I Bedienungsanleitung

Windsor

Windsor ROMBUS RMBS12 Bedienungsanleitung

Windsor

Windsor Dri-Matic Bedienungsanleitung

Windsor

Windsor SENSOR S12 Bedienungsanleitung

Windsor

Windsor NORTHWIND NWB 86284220 Bedienungsanleitung

Windsor

Windsor Priza Bedienungsanleitung

Windsor

Windsor Sensor SRXP18 Bedienungsanleitung

Windsor

Windsor VP6 Bedienungsanleitung

Windsor

Windsor 1.014-013.0 Bedienungsanleitung

Windsor

Windsor Sensor S15 Bedienungsanleitung

Windsor

Windsor CV86LI Bedienungsanleitung

Windsor

Windsor Chariot iCapsol CI24 Technische Daten

Beliebte Staubsauger Handbücher anderer Marken

Bissell

Bissell LittleGreen Proheat 1425 Series Bedienungsanleitung

Panasonic

Panasonic MC-YL637S147-AE Bedienungsanleitung

NEFF

NEFF N17XH10 0 Series Bedienungsanleitung

LG A9 Series Bedienungsanleitung

Oreck

Oreck Cordless Captura BK51700 Series Bedienungsanleitung

Kogan

Kogan KAVACROBVWA Bedienungsanleitung

Kränzle

Kränzle VENTOS 50 ID Benutzerhandbuch

EVVO

EVVO Ai35 Bedienungsanleitung

DeWalt

DeWalt DWH200D Bedienungsanleitung

Pontec

Pontec Pondomatic Vacuum Cleaner Bedienungsanleitung

Cleanmaxx

Cleanmaxx PC-P007E Bedienungsanleitung

Exido

Exido 240-114 Bedienungsanleitung

RIDGID

RIDGID WD1685AU0 Bedienungsanleitung

Ezviz

Ezviz RE4P Bedienungsanleitung

STG global

STG global TANVAC HDV3000 Bedienungsanleitung

Shark

Shark ROTATOR PRO COMPLETE NV550 Series Bedienungsanleitung

Factory

Factory M3340 Bedienungsanleitung

Shop-Vac

Shop-Vac VN92 SERIES Bedienungsanleitung