Winmate R15IB3S-65EX Bedienungsanleitung

Please read this instructions before operating the device and retain them for future reference.

15” Full IP65 Stainless

Class I Division 2

Flat Touch Series

R15IB3S-65EX

User Manual

V1.0

For more information on this

and other Winmate products,

please visit our website at:

www.winmate.com

Document Part Number: 9152150I1006

User Manual Contents

- 2 -

Contents

Preface.............................................................................................................- 4 -

About This User Manual .........................................................................- 11 -

Chapter 1: Introduction.................................................................................- 13 -

1.1 Product Features............................................................................- 13 -

1.2 Packing List....................................................................................- 14 -

1.3 Appearance....................................................................................- 15 -

1.3.1 Front View.............................................................................- 15 -

1.3.2 Side and Rear Views ............................................................- 15 -

1.3.3 LED Indicators ......................................................................- 16 -

1.4 Mechanical Dimensions..................................................................- 16 -

1.4.1 Dimensions 15”.....................................................................- 16 -

1.5 Hazardous Locations......................................................................- 17 -

Chapter 2: Getting Started............................................................................- 19 -

2.1 Turning On and Off Your Device ....................................................- 19 -

2.2 Adjusting the LCD Display Brightness............................................- 21 -

2.3 Connectors.....................................................................................- 22 -

2.3.1 Wiring Requirements ............................................................- 22 -

2.3.2 Connecting the Interface.......................................................- 23 -

2.3.3 Workstation...........................................................................- 25 -

2.3.4 Connector Pinouts ................................................................- 28 -

Chapter 3: Installation...................................................................................- 32 -

3.1 Cable Mounting Considerations......................................................- 32 -

3.2 Safety Precautions .........................................................................- 33 -

3.3 Mounting Guide..............................................................................- 33 -

3.3.1 VESA Mount.........................................................................- 34 -

Chapter 4: Maintenance................................................................................- 42 -

4.1 Cleaning the Display Screen ..........................................................- 42 -

4.2 Cleaning the Casing .......................................................................- 42 -

5 BIOS Setup Utility.......................................................................................- 44 -

5.1 When and How to Use BIOS Setup................................................- 44 -

5.2 BIOS Functions ..............................................................................- 45 -

5.3 BIOS Menu.....................................................................................- 46 -

User Manual Contents

- 3 -

5.3.1 Main Menu............................................................................ - 46 -

5.3.2 Advanced Menu.................................................................... - 47 -

5.3.3 Chipset Menu ....................................................................... - 66 -

5.2.6 Save & Exit........................................................................... - 70 -

5.3 Using Recovery Wizard to Restore Computer................................ - 72 -

Chapter 6: Technical Support...................................................................... - 74 -

6.1 Software Developer Support.......................................................... - 74 -

6.2 Problem Report Form..........................................................................74

Appendix A: Product Specifications........................................................... - 76 -

Appendix B: Touchscreen ........................................................................... - 79 -

User Manual Preface

- 4 -

Preface

No part of this document may be reproduced, copied, translated, or

transmitted in any form or by any means, electronic or mechanical, for any

purpose, without the prior written permission of the original manufacturer.

Trademark Acknowledgement

Brand and product names are trademarks or registered trademarks of their

respective owners.

Disclaimer

We reserve the right to make changes, without notice, to any product,

including circuits and/or software described or contained in this manual in

order to improve design and/or performance. We assume no responsibility or

liability for the use of the described product(s) conveys no license or title

under any patent, copyright, or masks work rights to these products, and

make no representations or warranties that these products are free from

patent, copyright, or mask work right infringement, unless otherwise specified.

Applications that are described in this manual are for illustration purposes

only. We make no representation or guarantee that such application will be

suitable for the specified use without further testing or modification.

Warranty

Our warranty guarantees that each of its products will be free from material

and workmanship defects for a period of one year from the invoice date. If the

customer discovers a defect, we will, at his/her option, repair or replace the

defective product at no charge to the customer, provide it is returned during

the warranty period of one year, with transportation charges prepaid. The

returned product must be properly packaged in its original packaging to obtain

warranty service. If the serial number and the product shipping data differ by

over 30 days, the in-warranty service will be made according to the shipping

date. In the serial numbers the third and fourth two digits give the year of

manufacture, and the fifth digit means the month (e. g., with A for October, B

for November and C for December).

For example, the serial number 1W14Axxxxxxxx means October of year

2014.

User Manual Preface

- 5 -

Customer Service

We provide a service guide for any problem by the following steps: First, visit

the website of our distributor to find the update information about the product.

Second, contact with your distributor, sales representative, or our customer

service center for technical support if you need additional assistance.

You may need the following information ready before you call:

Product serial number

Software (OS, version, application software, etc.)

Description of complete problem

The exact wording of any error messages

In addition, free technical support is available from our engineers every

business day. We are always ready to give advice on application

requirements or specific information on the installation and operation of any of

our products.

User Manual Preface

- 6 -

Advisory Conventions

Four types of advisories are used throughout the user manual to provide helpful

information or to alert you to the potential for hardware damage or personal injury.

These are Notes, Important, Cautions, and Warnings. The following is an

example of each type of advisory.

NOTE:

A note is used to emphasize helpful information

IMPORTANT:

An important note indicates information that is important for you to

know.

CAUTION/ ATTENTION

A Caution alert indicates potential damage to hardware and

explains how to avoid the potential problem.

Une alerte d’attention indique un dommage possible à

l’équipement et explique comment éviter le problème potentiel.

WARNING!/ AVERTISSEMENT!

An Electrical Shock Warning indicates the potential harm from

electrical hazards and how to avoid the potential problem.

Un Avertissement de Choc Électrique indique le potentiel de

chocs sur des emplacements électriques et comment éviter ces

problèmes.

ALTERNATING CURRENT / MISE À LE TERRE!

The Protective Conductor Terminal (Earth Ground) symbol

indicates the potential risk of serious electrical shock due to

improper grounding.

Le symbole de Mise à Terre indique le risqué potential de choc

électrique grave à la terre incorrecte.

User Manual Preface

- 7 -

Safety Information

WARNING! / AVERTISSEMENT!

Always completely disconnect the power cord from your chassis

whenever you work with the hardware. Do not make connections

while the power is on. Sensitive electronic components can be

damaged by sudden power surges. Only experienced electronics

personnel should open the PC chassis.

Toujours débrancher le cordon d’alimentation du chassis lorsque

vous travaillez sur celui-ci. Ne pas brancher de connections

lorsque l’alimentation est présente. Des composantes

électroniques sensibles peuvent être endommagées par des

sauts d’alimentation. Seulement du personnel expérimenté

devrait ouvrir ces chassis.

CAUTION/ATTENTION

Always ground yourself to remove any static charge before

touching the CPU card. Modern electronic devices are very

sensitive to static electric charges. As a safety precaution, use a

grounding wrist strap at all times. Place all electronic

components in a static-dissipative surface or static-shielded bag

when they are not in the chassis.

Toujours verifier votre mise à la terre afin d’éliminer toute charge

statique avant de toucher la carte CPU. Les équipements

électroniques moderns sont très sensibles aux décharges

d’électricité statique. Toujours utiliser un bracelet de mise à la

terre comme précaution. Placer toutes les composantes

électroniques sur une surface conçue pour dissiper les charge,

ou dans un sac anti-statique lorsqu’elles ne sont pas dans le

chassis.

User Manual Preface

- 8 -

Safety Precautions

For your safety carefully read all the safety instructions before using the

device. All cautions and warnings on the equipment should be noted.

Keep this user manual for future reference.

CAUTION/ATTENTION

Do not cover the openings!

Ne pas couvrir les ouvertures!

*Let service personnel to check the equipment in case any of the

following problems appear:

oThe power cord or plug is damaged.

oLiquid has penetrated into the equipment.

oThe equipment has been exposed to moisture.

oThe equipment does not work well or you cannot get it to

work according to the user manual.

oThe equipment has been dropped and damaged.

oThe equipment has obvious signs of breakage.

Do not leave this equipment in an uncontrolled environment where

the storage temperature is below -20°C (-4°F) or above 60°C

(140°F). It may damage the equipment.

CAUTION/ATTENTION

Use the recommended mounting apparatus to avoid risk of

injury.

Utiliser l’appareil de fixation recommandé pour éliminer le

risque de blessure.

WARNING! / AVERTISSEMENT!

Only use the connection cords that come with the product.

When in doubt, please contact the manufacturer.

Utiliser seulement les cordons d’alimentation fournis avec le

produit. Si vous doutez de leur provenance, contactez le

manufacturier.

WARNING!/ AVERTISSEMENT!

Always ground yourself against electrostatic damage to the

device.

Toujours vérifier votre mise à la terre afin que l’équipement ne

se décharge pas sur vous.

User Manual Preface

- 9 -

Important Information

Federal Communications Commission Radio Frequency

Interface Statement

This device complies with part 15 FCC rules.

Operation is subject to the following two conditions:

This device may not cause harmful interference.

This device must accept any interference

received including interference that may cause

undesired operation.

This equipment has been tested and found to comply with the limits for a

class "B" digital device, pursuant to part 15 of the FCC rules. These limits are

designed to provide reasonable protection against harmful interference when

the equipment is operated in a commercial environment. This equipment

generates, uses, and can radiate radio frequency energy and, if not installed

and used in accordance with the instruction manual, may cause harmful

interference to radio communications. Operation of this equipment in a

residential area is likely to cause harmful interference in which case the user

will be required to correct the interference at him own expense.

EC Declaration of Conformity

This equipment is in conformity with the requirement of

the following EU legislations and harmonized

standards. Product also complies with the Council

directions.

User Manual Preface

- 10 -

Certifications and Standards

Agency Standard for Marking

Description

II 3 G Ex ic nA IIC Gc

Certification with ATEX Directive 94/9/EC;

Independent 3rd party assessment (Notified

Body: DEMKO)

DEMKO 14 ATEX 1319472U

EN 60079-0: 2012 / EditionEN 60079-11:

2012 / EditionEN 60079-15: 2010 Edition

EX nA IIC T4 Gc

Independent 3rd party assessment

IECEx UL 17.0030X

IEC 60079-0:2011, 6th Edition

IEC 60079-15:2010, 4th Edition

N. A. Safety for Information

Technology Equipment

Certification by Underwriter’s Laboratories

to UL60950-1, 2nd Edition standard and

equivalent CSA C22.2 No 60950-1-07, 2nd

Edition Standard

N. A. Safety for Hazardous

Locations Class I, Div. 2,

Groups A, B, C, D, T4

Certification by Underwriter’s Laboratories

to ANSI/ISA- 12.12.01 -2012 standard and

equivalent CAN/CSA C22.2 No 213-M1987

Standard

Self-Declaration in accordance with

European LVD Directive 2006/95/EC;

Independent 3rd party assessment

(Accredited by IEC 17025)

Self-Declaration in accordance with EMC

Directive 2004/108/EC; Independent 3rd

party assessment (Accredited by IEC

17025)

Andere Handbücher für R15IB3S-65EX

Inhaltsverzeichnis

Andere Winmate Touchscreen Handbücher

Winmate

Winmate G-WIN Slim IP65 Bedienungsanleitung

Winmate

Winmate PT Series Bedienungsanleitung

Winmate

Winmate E-Series Bedienungsanleitung

Winmate

Winmate W10FA3S-GSH1 Bedienungsanleitung

Winmate

Winmate R15IE3S-PTC3 Bedienungsanleitung

Winmate

Winmate ARM-11 HMI Series Bedienungsanleitung

Winmate

Winmate R15IB3S-65A1FTP Bedienungsanleitung

Winmate

Winmate G-WIN Bedienungsanleitung

Winmate

Winmate R10L100-PCT2-PoE Bedienungsanleitung

Winmate

Winmate R15ID3S-65A1FTE Bedienungsanleitung

Winmate

Winmate W07IB3S-PCM1AC Bedienungsanleitung

Winmate

Winmate W05TA3S-PCT3AC Bedienungsanleitung

Winmate

Winmate R05FA3S-IPD1HMHB Bedienungsanleitung

Winmate

Winmate IP69K Stainless P-Cap Bedienungsanleitung

Winmate

Winmate W10IB3S-GSH1 Bedienungsanleitung

Winmate

Winmate R15IK3S-SPC369 Bedienungsanleitung

Winmate

Winmate R15IH3S-MRA3FP Bedienungsanleitung

Winmate

Winmate GC Series Bedienungsanleitung

Winmate

Winmate W07FA3S-PCO1AC-POE Fehlerbehebungshandbuch

Winmate

Winmate W05TA3S-PCT3AC Bedienungsanleitung

Winmate

Winmate R15IH3S-67A3HB Bedienungsanleitung

Winmate

Winmate W04FA3S-EHT1 Bedienungsanleitung

Winmate

Winmate W07FA3S-GSM1 Bedienungsanleitung

Winmate

Winmate W07IB3S-POM1 Bedienungsanleitung

Beliebte Touchscreen Handbücher anderer Marken

FlowLine

FlowLine Data loop Bedienungsanleitung

ALPEX

ALPEX AEx-8 P Series Bedienungsanleitung

Ltech

Ltech E5S Bedienungsanleitung

Harman

Harman AMX MODERO S MSD-701-L2 Bedienungsanleitung

Acnodes

Acnodes PC 1150 Bedienungsanleitung

AIS

AIS IP10IA99 series Bedienungsanleitung

IBASE Technology

IBASE Technology ASTUT-152-RE1S Bedienungsanleitung

YASKAWA

YASKAWA TP 610C Bedienungsanleitung

B&R

B&R Power Panel C Series Bedienungsanleitung

Beijer Electronics

Beijer Electronics X2 control Bedienungsanleitung

AXIOMTEK

AXIOMTEK GOT321W-521 Bedienungsanleitung

TRIDONIC.ATCO

TRIDONIC.ATCO x-touchBOX Bedienungsanleitung

Qomo

Qomo QIT1386 Bedienungsanleitung

DFI

DFI KS104-CD Bedienungsanleitung

AMX

AMX AXP-PPC Leitfaden

Sartorius

Sartorius X3 PR 5410 Bedienungsanleitung

AMX

AMX Modero X Series Bedienungsanleitung

Advantech

Advantech TPC-30 Series Bedienungsanleitung