X-Vision VIS200DX-2 Bedienungsanleitung

Model:

VIS238D

Colour Varifocal Dome Camera

•Please unpack the box carefully and identify that all the parts are present.

•Do not cut the camera cables, this will void the warranty.

•Makesure you use only the recommended power supply.Damage caused to the camera by

incorrect voltage or wiring is not covered by the warranty.

The camera is suitable for indoor or outdoor use. Please bear in mind the following points when

choosing a mounting position.

•The camera must be positioned so that it will not point directly into the sun (sunrise and

sunset) or any bright light, as this may cause damage to the camera.

•Avoid viewing areas where half the area is in bright sunlight and the other half is dark,

such as in the shadow of a building. All types of cameras have difficulty in ‘seeing’ with

such a large lux level variation.

Model: VIS200DX-2

Colour High Resolution

Vandal Dome Camera

Model:

VIS200DX-2

Colour High Resolution

Vandal Dome Camera

Before you begin

•Please unpack the box carefully and identify that all the parts are present.

•Do not cut the camera cables, this will void the warranty.

•Makesure you use only the recommended power supply.Damage caused to the camera by

incorrect voltage or wiring is not covered by the warranty.

The camera is suitable for indoor or outdoor use. Please bear in mind the following points when

choosing a mounting position.

•The camera must be positioned so that it will not point directly into the sun (sunrise and

sunset) or any bright light, as this may cause damage to the camera.

•Avoid viewing areas where half the area is in bright sunlight and the other half is dark,

such as in the shadow of a building. All types of cameras have difficulty in ‘seeing’ with

such a large lux level variation.

Shown with the chameleon cover

CCTVCCTV

THANK YOU VERY MUCH FOR PURCHASING OUR PRODUCT

The VIS200DX-2 Colour Vandal Dome camera is designed for medium

to high risk applications and is able to withstand a blow from a 10

pound sledgehammer. It offers very high resolution 480 TVL images

from its Sony 1/3" Super HAD CCD and has a high quality wide angle

lens. It will provide images in light levels as low as 0.1 lux. The camera

is designed for internal or external use and wall or ceiling mounting.

2. Product Description

1. Package Contents

1.Instruction

Manual

2. VIS200DX-2

Dome Camera

1 2

3. Chameleon Cover

3. Features

•Very High Resolution CCD sensor provides great quality Colour images

in light levels of 0.1 lux and above

•Sony 1/3" Super HAD CCD image sensor for 500 TVL resolution images

•Discreet styling for unobtrusive low profile use, includes paintable

chameleon cover

•Tamper and Vandal Resistant, can withstand a blow from a 10 pound

sledgehammer

•3-Axis mechanism for flexible wall or ceiling mounting

•Xvision IXC1 Digital Signal Processing (DSP) chip which has been

optimised for internal viewing and features Automatic Gain Control,

Auto White Balance, Automatic Electronic Iris, Back Light Compensation,

Low Smear,Edge Enhancement and Zero Colour Rolling

•3.6mm focus free Electronic Iris lens with 78° viewing angle lens for

super sharp images and easy selection of the optimum viewing angle

during installation

4. Adjust the camera viewing angle by first

tilting (STEP 1) then rotating the camera

module (STEP 2), and then turn the

horizontal adjustment ring (STEP 3) to

correct the image and achieve the required orientation (as shown in

Figure 2).

5. Place the dome cover on the camera and tighten it by turning it

clockwise.

Camera

Module Horizontal

Adjustment

Ring

Top

Tilt

Rotate

Figure 2

1. Select a suitable position on the wall or

ceiling to install the camera.

2. Rotate the dome cover by unscrewing

it counterclockwise to remove it from

the camera base.

3. Secure the camera in the desired

position with the three fixing screws

(as shown in Figure 1).

4. Installation

Figure 1

5. Dipswitch Setting

5.1 AES Function- The AES (Automatic Electronic Shutter) function

controls the brightness of the camera image, it should always be

in the AES position.

5.2 BLC Function- The BLC (Back Light Compensation) function makes

objects in front of a bright scene (such as a window on a bright

sunny day) clearer to see by increasing their brightness and

making the background darker. To turn on the BLC function flick

the dipswitch to the BLC position, to turn it off, flick the dipswitch

to the OFF position.

5.3 AGC Function- For better performance in low light conditions the

AGC (Automatic Gain Control) can be increased from the

standard 16db to 26db. This has the effect of making the picture

brighter (however it may also add more noise to the picture, as it

is amplifying all aspects of the video signal). To increase the AGC

flick the dipswitch to the AGC position, to turn leave it as normal,

flick the dipswitch to the OFF position.

5.4 Flickerless Function- The flickerless function is designed to

improve the images and colour balance when using the cameras

where Fluorescent Lighting is present. Toturn on the flickerless

function flick the dipswitch to the F.L. position, to turn it off, flick

the dipswitch to the OFF position.

DIP Switches on the Camera Board

1. Connect the video output (Yellow BNC Connector) to a monitor or

other video device through a 75 Ohms type coaxial cable.

2. To connect the power source,

insert the DC Power plug

into the DC Jack (Red) on

the camera’s trailing lead.

(as shown in Figure 4).

7. Connection

Figure 4

1. Simply place the chameleon cover over the

dome and press down until your hear it

click (as shown in Figure 3).

2. The chameleon cover can be painted to

match the decor of any interior without

affecting the warranty of the camera.

Figure 3

6. Using the Chameleon Cover

8. Specifications

Model: VIS200DX-2

Picture Type: Colour

Image Sensor: Sony 1/3” Super HAD CCD

DSP: Xvision IXC1

Resolution: 480 TVL

Lens Viewing Angle: 78° (92° Diagonal)

Infra Red Nightvision: No

Minimum Illumination: 0.1 Lux

Audio: No

Operating Voltage: 12V DC 150mA

Suggested Power Supply: 12V DC 300mA Regulated

Mounting: Wall/Ceiling

Weatherproofing: Yes

Dimensions (ØxD): 110x70mm

CCTVCCTV

TECHNICAL SUPPORT:

For Technical Support for any Xvision product please contact your local

distributor.

LIMITED WARRANTY:

This product is supplied with a 2 Year warranty. The Warranty excludes

products that have been misused, (including accidental damage) and

damage caused by normal wear and tear. In the unlikely event that you

encounter a problem with this product, it should be returned to the place

of purchase.

Manufactured exclusively for Xvision - www.x-vision.co.uk

Europe

Unit 2, Valley Point,

Beddington Farm Road,

Croydon, Surrey

CR0 4WP

United Kingdom

Far East

Kyoung Am Building

157-27 Samsung-dong

Kangnam-ku

135 090 Seoul

Korea

Middle East

Burjuman Tower,

18th Floor

PO Box 121828

Dubai 43659

United Arab Emirates

North America

100 Park Avenue

New York City,

New York

10017

United States

Inhaltsverzeichnis

Andere X-Vision Sicherheitskamera Handbücher

X-Vision

X-Vision XPD700WIR-2 Bedienungsanleitung

X-Vision

X-Vision VIS338D Bedienungsanleitung

X-Vision

X-Vision CVR811 Bedienungsanleitung

X-Vision

X-Vision XSD27ZIR-2 Bedienungsanleitung

X-Vision

X-Vision XP1080B Bedienungsanleitung

X-Vision

X-Vision PCC422E Bedienungsanleitung

X-Vision

X-Vision VIS249D-2 Bedienungsanleitung

X-Vision

X-Vision PCC427 Bedienungsanleitung

X-Vision

X-Vision VIS338DX-3 Bedienungsanleitung

X-Vision

X-Vision Professional NPR Camera Einrichtungshandbuch

X-Vision

X-Vision VIS200DX-3 Bedienungsanleitung

X-Vision

X-Vision XIR538 Bedienungsanleitung

X-Vision

X-Vision XC960S30IRN Bedienungsanleitung

X-Vision

X-Vision XC960VA Bedienungsanleitung

X-Vision

X-Vision XSD27ZS Bedienungsanleitung

X-Vision

X-Vision VIS249DX Bedienungsanleitung

X-Vision

X-Vision VIS238D Bedienungsanleitung

X-Vision

X-Vision XPT600 Bedienungsanleitung

X-Vision

X-Vision XPD700W-2 Bedienungsanleitung

X-Vision

X-Vision XIR501 Bedienungsanleitung

X-Vision

X-Vision XSD27ZIR Bedienungsanleitung

X-Vision

X-Vision XHC1080S10IRN Bedienungsanleitung

X-Vision

X-Vision XP1080S20 Bedienungsanleitung

X-Vision

X-Vision VIS249D Bedienungsanleitung

Beliebte Sicherheitskamera Handbücher anderer Marken

Okina USA

Okina USA SIR36-870VF650LP Bedienungsanleitung

Divio

Divio NDR155PA Bedienungsanleitung

Canon

Canon VB-C500D Bedienungsanleitung

Easy Access

Easy Access EasyGuard Bedienungsanleitung

Vivotek

Vivotek FD9389-EHV-v2 Bedienungsanleitung

TUYA

TUYA COSMO W2 Bedienungsanleitung

Eusso

Eusso UNC7500-IR Einrichtungshandbuch

urmet domus

urmet domus 1096/204 Bedienungsanleitung

VC VC20 series Bedienungsanleitung

Axis

Axis Q1614 Bedienungsanleitung

ieGeek

ieGeek DD201 Bedienungsanleitung

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Bedienungsanleitung

Vicon

Vicon V662-D-1 Betriebsanleitung

Grundig

Grundig GCH-K0274P Bedienungsanleitung

Lorex

Lorex VANTAGE LBC7032 Bedienungsanleitung

4xem

4xem WPT Bedienungsanleitung

Samsung

Samsung SCV-3082 Bedienungsanleitung

Vitek

Vitek VTC-C544 Bedienungsanleitung