Xerox DocuPrint C525 A-AP Bedienungsanleitung

DocuPrint C525 A-AP

Linux Print Driver Operation Guide

Thank you for choosing this printer.

License Agreement for Linux Printer Driver

ATTENTION: USE OF THE SOFTWARE IS SUBJECT TO THE SOFTWARE LICENSE

TERMS SET FORTHBELOW. USING THE SOFTWARE INDICATES YOUR

ACCEPTANCE OF THESE LICENSE TERMS.

1. PROPRIETARY RIGHTS:

Title, ownership rights, and intellectual property rights in the SOFTWARE shall remain

in Fuji Xerox Co., Ltd. ("Fuji Xerox") and its third party suppliers. You have no rights in

the SOFTWARE except as expressly granted in accordance with this agreement.

2. LICENSE:

Under this agreement, you are granted a non-exclusive, non-transferable license to

use the SOFTWARE for the purpose of using with compatible Fuji Xerox products in

Japan.

3. Direction:

If any direction on usage or restriction for the SOFTWARE is expressly specified in

this web site, you are required to follow such direction.

4. Restrictions:

You are not permitted to (1) assign, sublicense, sell, rent, lease, convey, or transfer

the SOFTWARE to any third party by any tangible media such as floppy disk,

magnetic tape, or CD-ROM, (2) distribute the SOFTWARE on a network or by a

telephone line available to the public or (3) alter, modify, decompile, disassemble,

reverse engineer, or create derivative works based on the whole or any part of the

SOFTWARE.

5. TERM:

This agreement is effective upon installing the SOFTWARE until you terminate the

agreement by destroying the SOFTWARE. This agreement will also terminate if you

fail to abide by any terms of this agreement. In case of termination, you must promptly

destroy the SOFTWARE.

6. LIMITED WARRANTIES:

THE SOFTWARE IS SUPPLIED STRICTLY ON AN 'AS IS' BASIS WITHOUT

WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING BUT

NOT LIMITED TO ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A

PARTICULAR PURPOSE, WITH RESPECT TO THE SOFTWARE. YOU ARE

RESPONSIBLE FOR CHOOSING, MAINTAINING AND MATCHING OTHER

HARDWARE AND SOFTWARE COMPONENTS IN COMBINATION OF THE

SOFTWARE. IN NO EVENT, SHALL FUJI XEROX, FUJI XEROX CHANNEL

PARTNERS, AUTHORIZED DEALERS AND THEIR THIRD PARTY SUPPLIERS BE

LIABLE FOR ANY LOSS OR DAMAGE INCLUDING INCIDENTAL OR

CONSEQUENTIAL LOSS OR DAMAGE, ARISING FROM USE OF OR INABILITY

TO USE SOFTWARE, OR ANY MODIFICATION OF THE SOFTWARE.

7. LIMITATION OF LIABILITY:

IN NO EVENT WILL FUJI XEROX OR ITS LICENSORS BE LIABLE (i) FOR ANY

DIRECT, INDIRECT, SPECIAL, PUNITIVE OR CONSEQUENTIAL DAMAGES

(INCLUDING, BUT NOT LIMITED TO, DAMAGES FOR LOSS OF BUSINESS

PROFITS, BUSINESS INTERRUPTION, LOSS OF PROGRAMS OR

INFORMATION, AND THE LIKE), EVEN IF FUJI XEROX SHALL HAVE BEEN

ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, AND REGARDLESS OF

THE FORM OF ACTION, WHETHER IN CONTRACT, TORT, OR OTHERWISE; OR

(ii) FOR ANY CLAIM ATTRIBUTABLE TO ERRORS, OMISSIONS, OR OTHER

INACCURACIES IN OR DESTRUCTIVE PROPERTIES OF THE SOFTWARE.

8. EXPORT CONTROL:

You are not allowed to export the SOFTWARE in part or whole, directly or indirectly, in

violation of any restrictions, laws or regulations imposed by the government of Japan

or any other relevant countries, and are required to obtain necessary approval prior to

exporting the SOFTWARE.

9. Governing Laws, Jurisdiction and Entire Agreement:

This Agreement shall be governed by and construed in accordance with the laws of

Japan. All disputes which may arise between the parties in connection with this

Agreement shall be subject to final and exclusive jurisdiction at Tokyo District Court in

Japan. This Agreement constitutes the sole understanding of the parties about this

subject matter and terminates and supersedes all prior understandings or agreements

on the subject matter hereof.

10. Free Software Module Licensed under GPL:

The Software contains a free software module, listed as below, which is licensed

under GNU General Public License Version 2.

/usr/lib/cups/filter/FXM_PF

The module is free software. You may use, modify and distribute the module according

to GNU General Public License Version 2, and its revised terms and conditions,

provided by Free Software Foundation. Fuji Xerox thinks that the module could be

useful. However THERE IS NO WARRANTY FOR THE PROGRAM. GNU General

Public License Version 2 is attached hereunder. Would you read carefully the terms

and conditions, please.

“GNU GENERAL PUBLIC LICENSE Version 2, June 1991” (P. 21)

This is a guide on installing the Linux print driver and items that can be set for printing. To

use the print driver correctly and effectively, please read this guide before using it.

This guide is written with the assumption that you are familiar with the basic knowledge, and

way of operating your Linux computer and printer.

For details on how to operate the printer, please read the manual provided with the printer.

The screen images in this manual are examples from a Turbolinux 10 Desktop.

Contents

License Agreement for Linux Printer Driver ..................................................................... 1

Conventions .....................................................................................................................3

Environments Confirmed for Operation............................................................................ 4

Preparation for Installing the Print Driver ......................................................................... 4

Installing/Uninstalling the Print Driver............................................................................... 5

Creating a Print Queue..................................................................................................... 7

Creation procedure........................................................................................................... 7

Setting Printer-specific Features .................................................................................... 14

Message List .................................................................................................................. 20

Possible Problems.......................................................................................................... 20

GNU GENERAL PUBLIC LICENSE Version 2, June 1991............................................ 21

Conventions

1. The following icons are used in this guide:

Important Indicates important information which you should read.

Note Indicates additional information on operations or features.

Refer to Indicates reference sources.

2. The following conventions are used in this guide:

Refer to "xxx" : The cross-reference is within this guide.

Refer to xxx : The cross-reference is not within this guide.

[ ] : Indicates items displayed on the computer and the printer control

panel. Also indicates the title of printed reports/lists from the printer.

3. "On" and "Off" indicate the statuses in which the check box is selected and in which

the check box is cleared, respectively.

• Turbolinux and the Turbolinux logo are registered trademarks or trademarks of Turbolinux, Inc.

• Red Hat and RPM are trademarks or registered trademarks of Red Hat Inc. in the United States and

other countries.

• MIRACLE LINUX and its logos are registered trademarks used under license by Miracle Linux

Corporation.

• Linux is a trademark or registered trademark of Linus Torvalds in the United States and other countries.

• The Common UNIX Printing System, CUPS, and the CUPS logo are the trademarks of Easy Software

Products.

• All product/brand names are trademarks or registered trademarks of the respective holders.

Environments Confirmed for Operation

The environments confirmed for the operation of the Linux print driver is as follows. The print

driver uses CUPS (Common Unix Printing System) as the printing system.

Linux Distribution and CUPS Version (*1)

• MIRACLE LINUX Version 3.0 - Asianux Inside: CUPS Version 1.1.17

• RedHat Enterprise Linux WS Version 3: CUPS Version 1.1.17

• SUSE Linux 9.2 Professional: CUPS Version 1.1.21

• Turbolinux 10 Desktop: CUPS Version 1.1.19

(*1): The supported environments are subject to change without prior notice.

Refer to our company's web site.

Hardware Environment

A computer with a 32-bit CPU that is x 86 compatible and can run Linux distributions.

Interface

• Parallel

•USB

(*2)

• Ethernet (supported protocol: LPR (TCP/IP))

(*2): The USB interface must be equipped as standard. (Note, however, that operation of

all USB peripheral devices is not guaranteed.)

Preparation for Installing the Print Driver

Confirming the Network Configuration

When using this printer in a network environment (LPR protocol) connected by Ethernet,

check the following settings before you start to install the print driver.

Note

• The printer settings can be confirmed by printing [Printer Settings]. Refer to the Setup and Quick

Reference Guide on how to print the printer settings.

• For details on settings on the Linux computer, refer to the manual provided with the Linux computer.

Downloading the Print Driver

Download the print driver for the Linux operating system from our company's web site onto

your computer.

Important

• Please take note that the communication cost will be borne by the customers.

Linux computer Printer

The configuration for IP address and TCP/

IP must be set to use them.

• The IP address must be set.

• The LPD protocol must be set to [Enable]. (default:

[Enable])

Refer to

• Setup and Quick Reference Guide

Our company's web site http://www.fxprinters.com/

Installing/Uninstalling the Print Driver

The installer (RPM package) is provided with the printer to install the print driver in your

Linux computer. By using the installer, you can upgrade or uninstall the print driver that has

already been installed in the computer.

Installing/Upgrading the Print Driver

To install or upgrade the print driver, specify the RPM package from the command line of

the terminal.

The procedure is as follows.

1. Open a terminal.

Note

• The method to open a terminal differs according to the Linux distribution. For details, refer to the manual

provided with your Linux distribution.

2. Log in as a superuser and execute the following command.

rpm -Uvh Fuji_Xerox-DocuPrint_C525_A_AP-x.x-1.i386.rpm

Note

• In this example the RPM package is in the current directory. If the RPM package is in a different

directory, specify the path to the RPM package.

• Change x.x to the version of the file to be installed.

3. When the following screen appears, installation is complete. Confirm and then go to

“Creating a Print Queue” (P. 7).

Uninstalling the Print Driver

To uninstall the print driver, select the RPM package from the command line of the terminal.

The procedure is as follows.

1. Open a terminal.

Note

• The method to open a terminal differs according to the Linux distribution. For details, refer to the manual

provided with your Linux distribution.

2. Log in as a superuser and execute the following command.

rpm -e Fuji_Xerox-DocuPrint_C525_A_AP

Note

• Change x.x to the version of the file to be uninstalled.

3. When the following screen appears, uninstallation is complete. Confirm the

application has been uninstalled.

Creating a Print Queue

To use the printer on a Linux operating system, you must create a print queue after installing

the print driver. The following describes the procedure for creating a print queue using the

Web browser from the Web Managemnet page (http://localhost:631/).

Set the CUPS password (for SUSE only)

If you are using SUSE (CUPS Version 1.1.21 or later), execute the following command in

the terminal window in advance, and then set the CUPS password.

1. Open a terminal.

Note

• The method to open a terminal differs according to the Linux distribution. For details, refer to the manual

provided with your Linux distribution.

2. Log in as a superuser and execute the following command.

lppasswd -g sys -a root

In step 5 of the next section, when asked to enter a password, enter the password that is

set here.

Creation procedure

1. Make sure that the printer is on. When using the parallel or USB connection, also

make sure that the Linux computer is correctly connected to the printer by the cable.

2. Start a Web browser, and then enter the following URL into the address bar to access

to the CUPS Web Management page.

http://localhost:631/

3. Click [Printers] or [Manage Printers].

4. Click [Add Printer].

5. If the dialog box asks you to enter a user name (root) and password (CUPS’s

password when using SUSE), log in with a user that has administrator right.

6. Specify each item, and then click [Continue].

Note

• You can specify [Location] and [Description] for your preference.

7. Follow the procedures below to add the printer, according to your connection type.

When Using an LPR Connection

1. Select [LPD/LPR Host or Printer] from the [Device] menu, and then click [Continue].

2. Enter “lpd://The IP address of the printer/The queue name” for [URI], and then click

[Continue].

The following is an example of using “192.168.1.100” for the IP address and “queue”

for the queue name.

Note

• You can specify the queue name for your preference.

3. Select [FX] from the [Make] list, and then click [Continue].

4. Select the product name for the printer, and then click [Continue].

Inhaltsverzeichnis

Andere Xerox Drucker Handbücher

Xerox

Xerox 8860MFP - Phaser Color Solid Ink Bedienungsanleitung

Xerox

Xerox 4215 Technisches Handbuch

Xerox

Xerox DocuColor 5000AP Montageanleitung

Xerox

Xerox Phaser 6020 Betriebsanleitung

Xerox

Xerox Phaser 6022 Betriebsanleitung

Xerox

Xerox Phaser 8560 Betriebsanleitung

Xerox

Xerox DocuColor 2045 Bedienungsanleitung

Xerox

Xerox DocuPrint 96 Handbuch

Xerox

Xerox 6125N - Phaser Color Laser Printer Bedienungsanleitung

Xerox

Xerox D Series Bedienungsanleitung

Xerox

Xerox Phaser 860 Bedienungsanleitung

Xerox

Xerox Phaser 6100 Bedienungsanleitung

Xerox

Xerox DocuPrint 65 Technisches Handbuch

Xerox

Xerox 4400N - Phaser B/W Laser Printer Bedienungsanleitung

Xerox

Xerox DocuColor 5000 Bedienungsanleitung

Xerox

Xerox 4045 Technisches Dokument

Xerox

Xerox Phaser 6280 Bedienungsanleitung

Xerox

Xerox Wide Format IJP 2000 Bedienungsanleitung

Xerox

Xerox DocuPrint P8EX Bedienungsanleitung

Xerox

Xerox Phaser 7300 Montageanleitung

Xerox

Xerox Phaser 3140 Bedienungsanleitung

Xerox

Xerox 701P40016 Bedienungsanleitung

Xerox

Xerox 5500DT - Phaser B/W Laser Printer Bedienungsanleitung

Xerox

Xerox Nuvera 100 Bedienungsanleitung

Beliebte Drucker Handbücher anderer Marken

Canon

Canon i70 Series Bedienungsanleitung

Evolis

Evolis Elypso Bedienungsanleitung

Kyocera

Kyocera FS-9530DN Bedienungsanleitung

Canon

Canon LASER SHOT LBP-1210 Bedienungsanleitung

Samsung

Samsung BIXOLON SRP-350plusF Bedienungsanleitung

Canon

Canon PIXMA PRO-1 Series Bedienungsanleitung

Canon

Canon PIXMA G3560 Einrichtungshandbuch

Dell

Dell Color Laser Printer 2130cn Bedienungsanleitung

Tektronix

Tektronix Phaser 840 Bedienungsanleitung

Brother

Brother 1440 - HL B/W Laser Printer Kurzanleitung

Fuji Xerox

Fuji Xerox DocuPrint P375 dw Bedienungsanleitung

WOOSIM

WOOSIM PORTI-S30 Bedienungsanleitung

Olivetti

Olivetti PG L2140 Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub 224e Bedienungsanleitung

Canon

Canon LBP113w Bedienungsanleitung

Canon

Canon PRO-500 Series Einrichtungshandbuch

Epson

Epson ET-7750 Betriebsanleitung

Lexmark

Lexmark Infoprint 1332 Bedienungsanleitung