Zcom XN-990 Bedienungsanleitung

IEEE 802.11n Wireless LAN

PCI Card

Model: XN-990

Quick Installation Guide

Version: 1.0

Date of issue: July, 2007

INTRODUCTION

Thank you for purchasing the IEEE 802.11n Wireless LAN PCI Adapter. This product is the

Wireless adapter that base on IEEE 802.11n draft 2.0 standard that deliver up to 12x faster than

IEEE 802.11g while staying backward compatible with 802.11g and 802.11b network. This Quick

Installation Guide will guide you through the basic installation procedure. For further information,

please check the User’s Manual in the Product CD.

About your IEEE 802.11n Wireless LAN PCI Adapter

The IEEE 802.11n Wireless LAN PCI Adapter is a wireless LAN adapter for your computer. It

can be operated in Infrastructure or Ad-Hoc network configurations. Ad-Hoc mode allows IEEE

802.11n Wireless LAN PCI Adapter users to join a Basic Service Set (i.e., peer-to-peer mode,

without access point). Infrastructure mode allows 802.11n Wireless LAN PCI Adapter users to join

an Extended Basic Service Set (i.e., connect to an Access Point).

Package Content

The product package should contain the following items:

I. IEEE 802.11n Wireless LAN PCI Adapter…………….………….…….…...……………..x1

II. Product CD…………………………………………..……………………………..…………x1

III. Quick Installation Guide…………………………………………..………………………….x1

IV. Three detachable dipole antennas …………………………………………………………x1

If any of the above items are not included or damaged, please contact your local vendor for

support.

Installation Requirement

Before installation, make sure you have computer with following:

9A minimum of 5MB available hard disk space.

9A minimum of 32 MB RAM

9A PCI slot port.

9A CD-ROM drive.

9Windows Vista/XP/2000

Installation of IEEE 802.11n Wireless LAN PCI Adapter for Windows Vista

1. Turn off your desktop PC.

2. Open the case of your desktop computer.

3. Find an available PCI slot on your computer.

4. Firmly insert the PCI Adapter into the PCI slot and close the case of the computer.

5. Connect the three antennas to the antenna connector of PCI Adapter.

6. Power on your desktop PC, it will auto-detect the IEEE802.11n Wireless LAN PCI Adapter

and a “Found New Hardware” window will show up. Select “Locate and install driver

software (recommended)” to install the driver.

7. Select “Don’t search online” to locate the driver on CD-ROM.

8. Insert the included CD into the CD-ROM drive on your laptop. And click Next.

9. The windows will appear the message about the Network Control has not passed Windows

Logo testing to verify its compatibility with Windows Vista. Select “Install this driver

software anyway” to continue installing.

10. Click Close to complete the installation.

Note: If the driver is not WHQL certified, Vista64 will not load digital-unsigned software.

To complete installation with unsigned driver, you may do the following:

1. Before starting 64-bit editions of Windows Vista, press “F8” to enter advance boot options menu.

2. Choose “Disable Driver Signature Enforcement” and Windows will start again.

3. Start to install the driver and utility for your Wireless LAN PCI Adapter.

After you install the driver and utility and insert your wireless PCI adapter, the icon appears

in the system tray.

Right click the icon, the below window will show up. And select Connect to a network to

configure the wireless LAN adapter.

Installation of IEEE 802.11n Wireless LAN PCI Adapter for Windows XP

1. Insert the included CD into the CD-ROM driver on your computer. Locate and double-click

setup.exe.

2. Click Next to accept installing IEEE 802.11n Wireless LAN PCIAdapter driver files.

3. Click Next to accept the default file location or click Browse to select an alternate folder.

4. Select a program folder or type a new folder name and click Next.

5. You may add a shortcut in the startup folder as desired and click Next.

6. Click on Finish to complete the installation.

7. Turn off your desktop PC.

8. Open the case of your desktop computer.

9. Find an available PCI slot on your computer.

11. Firmly insert the PCI Adapter into the PCI slot and close the case of the computer.

10. Connect the three antennas to the antenna connector of PCI Adapter.

11. Start your PC, it will auto-detect new hardware and will display a “Found New Hardware

Wizard” window. Select “Install the software automatically (Recommended)” and press

Next to install the driver

12. The windows will appear the message about the Network Control has not passed Windows

Logo testing to verify its compatibility with Windows XP. Click on Continue Anyway button

to continue installing.

13. The windows will find 802.11n Wireless LAN PCI Adapter and start copying corresponding

files into the system. Click on Next to continue.

14. Click Finish to complete the installation.

15. After installing the Wireless LANAdapter, the Windows XP will display a “Wireless Network

Connection # ” message.

Click on the message and the “Automatic Wireless Network Configuration” will then appear

automatically. You may click on Connect button to allow users to connect to an available wireless

infrastructure network (Access Point).

You may also click the Advanced button to make advanced configuration for the Wireless LAN

Adapter, shown as below.

For more information on using the Automatic Wireless Network Configuration please refer to

Windows XP Help file.

However, the WLAN Utility, which came with the Wireless LAN Adapter, provides you more tools

to configure the IEEE 802.11n Wireless LAN PCI Adapter and to monitor the wireless connection.

For more information on installing and using the WLAN Utility, please refer to the following

sections “Installation of the Wireless LAN Utility” and “Usage of the WLAN Utility”.

Installation of the IEEE 802.11n Wireless LAN PCI Adapter for Windows 2000

1. Insert the included CD into the CD-ROM driver on your computer. Go to Utility folder and

double-click setup.exe.

2. Click Next to accept installing IEEE 802.11n Wireless LAN PCI Adapter driver and utility files.

3. Click Next to accept the default file location or click Browse to select an alternate folder.

4. Select a program folder or type a new folder name and click Next.

5. You may add a shortcut in the startup folder as desired and click Next.

Warning: You must choose one

way to configure Wireless LAN

PC Adapter either of using our

WLAN Utility, or using Windows

XP Automatic Wireless Network

Configuration first. If you want

to switch configuration from

WLAN Utility to Zero

Configuration, you need to

check the check box “Use

Windows to configure my

wireless network settings” to

enable the WZC service.

6. Click on Finish to complete the installation.

7. Turn off your desktop PC.

8. Open the case of your desktop computer.

9. Find an available PCI slot on your computer.

10.Firmly insert the PCI Adapter into the PCI slot and close the case of the computer.

11.Connect the three antennas to the antenna connector of PCI Adapter.

12.Power on your desktop PC, it will auto-detect new hardware and will display a “Found New

Hardware Wizard” window. Click Next to continue.

13.Select “Search for a suitable driver for my device (recommended)”. Insert the Product

CD-ROM into the appropriate drive. Click Next to install the driver.

14.The windows will find “IEEE 802.11n Wireless LAN PCI Adapter”. Click Next to continue.

15.A Digital Signature Not Found message may appear. Click Yes button to proceed.

16. Click Finish to complete the installation.

Installation of the Wireless LAN Utility

1. Insert the Driver and Utility CD into the CD-ROM drive. Locate and double-click setup.exe to

follow the windows instructions to install wireless utility.

2. When the Welcome screen appears, click Next.

3. The Choose Destination Location screen displays the default Destination Folder. If you want to

change the default folder, you can click Browse and choose a different destination folder.

Click Next to go to the next screen.

4. The Select Program Folder screen appears. Accept or change the default folder name and

click Next to continue.

5. Accept to add shortcut of this utility and click Next to continue.

6. Completing the utility installation.

7. Upon completion, go to Program Files and run the Wireless LAN Utility. The utility interface will

then appear and at the same time its icon appears in the System Tray in the bottom right

corner of your task bar.

WLAN Utility Summary

The WLAN Utility consists of window with 3 items for you to monitor and configure the IEEE

802.11n Wireless LAN PCI Adapter: Configuration, Site Survey and About.

The Configuration Screen

The Configuration item allows you to modify the configuration parameters for the IEEE 802.11n

Wireless LAN PCI Adapter.

Configuration

LABEL DESCRIPTION

Profile

The Profile field allows you to set values for all parameters by selecting a previously defined

profile. To create the profile, go to the Profile field, type a profile name and set the corresponding

parameters.After changing parameters, save the profile and click the Apply button to take effect.

You can have multiple profiles and modify the profile at any time.

SSID The SSID is the unique ID used by Access Points and stations to identify a wireless LAN.

Wireless clients associating to anyAccess Point must have the same SSID.

Network Type This field displays the network type (Infrastructure or Ad Hoc) for user select.

Ad-hoc Channel

To form Ad-Hoc network, the same channel is required. Before choosing a channel, it is advised

to use the Site Survey tool to check the quality of each channel. Afterwards, go to the Channel

field and choose a clear channel for your wireless LAN stations. Click on the Apply button to

make the change take effect.

Transmit Rate Dynamic Data Rate Scaling from 300 to 1Mbps.

State This field displays the MAC address of the wireless device to which the wireless LAN Adapter is

associated.

Current Channel This field displays the radio channel the wireless LAN Adapter is currently using.

Current Tx Rate This field displays the current transmission rate of the wireless LAN adapter in megabits per

second (Mbps).

Throughput

(Packets/sec) This field displays the real-time statistics of the data rate.

Link Quality The status bar shows the quality of the signal.

Signal Strength The status bar shows the strength of the signal.

The Site Survey Screen

Use the Site Survey screen to scan for and connect to a wireless network automatically. By

clicking on the Rescan button, the Site Survey can display Access Points around the working

environment. Besides showing the ESSID of each Access Point, it also displays BSSID, Channel,

Capability, Signal, and Supported Rates. To join any of the displayed Access Points, highlight the

Access Point you desire to connect and then click Join.

Site Survey

LABEL DESCRIPTION

ESSID This field displays the SSID (Service Set IDentifier) of each wireless device.

BSSID This field displays the MAC address of each wireless device.

Channel This field displays the channel number used by each wireless device.

Network Type This field displays the network type (Infrastructure or Ad Hoc) of the wireless device.

Security This field shows whether data encryption is activated (WEP (WEP or 802.1x), WPA, WPA-PSK,

WPA2, WPA2-PSK) or inactive (Disabled).

Signal This field displays the signal strength of each wireless device.

Supported Rates This field displays the supported rates of each wireless device.

The About Screen

The About page shows the versions of the Wireless LAN Utility, driver, and firmware of the IEEE

802.11n Wireless LAN PCI Adapter. Also, the MAC address and frequency domain are displayed.

Inhaltsverzeichnis

Andere Zcom PCI-Karte Handbücher

Zcom

Zcom XG-650E Bedienungsanleitung

Beliebte PCI-Karte Handbücher anderer Marken

ERMA

ERMA SSI 1417 Bedienungsanleitung

SIIG

SIIG CyberSerial Dual PCI Montageanleitung

Moxa Technologies

Moxa Technologies CP-102E Bedienungsanleitung

I-Bus

I-Bus IBC2602 Bedienungsanleitung

Exsys

Exsys EX-60102 Bedienungsanleitung

Chelsio Communications

Chelsio Communications T5 Series Bedienungsanleitung

Conrad Electronic

Conrad Electronic 97 46 71 Bedienungsanleitung

Micro Innovations

Micro Innovations USB650A Bedienungsanleitung

KTI Networks

KTI Networks KF-310 Bedienungsanleitung

Asus

Asus SpaceLink WL230 Bedienungsanleitung

SIIG

SIIG SC2475 Bedienungsanleitung

TRENDnet

TRENDnet TEW-703PI Bedienungsanleitung

Belkin

Belkin F5D7000F Bedienungsanleitung

Pericom

Pericom PI7C7100 Bedienungsanleitung

ADLINK Technology

ADLINK Technology cPCI-3548 Bedienungsanleitung

Digium

Digium TE200 Series Bedienungsanleitung

Allo.com

Allo.com 2nd Gen E1/T1/J1 Bedienungsanleitung

Western Digital

Western Digital FireWire PCI Adapter Bedienungsanleitung