ZKTeco ProFace X SL Bedienungsanleitung
Due to regular upgrades of systems and products, ZKTeco could not guarantee exact consistency between the
actual product and the written information in this manual.
Quick Start Guide
ProFace X (SL)
Version: 1.0
1
1Overview
Speaker
Reset Button
Exit
button
Auxiliary
input
AUX
AL+
AL-
NC
COM
NO
BUT
GND
SEN
GND
Alarm
Lock
Sensor
GND
+12V Power
GND
INWD0
INWD1
Wiegand
In
Wiegand
Out
12V
GND
WD0
WD1
Networkinterface
RS232
RS485
12V
485B
485A
GND
TXD1
RXD1
GND
GND
GND
12V
12V
Power
interface
Tamper Switch
8-inch Touchscreen
RGB Camera
Near-infrared Flash
Flash
Proximity Sensor
Dot Projector
Infrared Camera
2
3 Device Installation
①Attach the mounting template sticker to the wall, and drill holes according to the mounting
paper.
②Fix the backplate on the wall using wall mounting screws.
③Attach the device to the backplate.
④Fasten the device to the backplate with a security screw.
Install on the wall
1 2
4
1.5m
3
Please refer to the following recommendations for installation.
AVOID DIRECT
SUNLIGHT
AND EXPOSURE
AVOID GLASS
REFRACTION
KEEP EFFECTIVE
DISTANCE
0.3-2.5m
KEEP DISTANCE
10ft
6.5ft
window
2 Installation Environment
①
②
Install on the barrier gate
1
2
Please thread the wire through the bracket before installation.
①Drill a hole on the barrier gate, insert the bracket into the hole and fix it with a nut.
②Adjust the angle of the device.
3
3 Device Installation
30mm
①
②
4
4 Standalone Installation
Alarm Smoke
Detector
Lock TCP/IP
Exit Button
Door Sensor
Reader
PC
5 Door Sensor, Exit Button & Alarm Connection
Door Sensor
Alarm Power
Alarm
Detector Power
SmokeDetector
ExitButton
-
+
-+
-
+
AUX
AL+
AL-
NC
COM
NO
BUT
GND
SEN
GND
GND
NO
COM
5
6 Lock Relay Connection
The system supports Normally Opened Lock and Normally Closed Lock.
The NO LOCK (normally unlocked when power-on) is connected with 'NO' and 'COM' terminals, and
the NC LOCK (normally locked when power-on) is connected with 'NC' and 'COM' terminals.
Take NC Lock as an example below:
1)Device not sharing power with the lock
Normally Closed Lock
DC12V
DC12V
2)Device sharing power with the lock
+12V
GND
FR107
FR107
Normally Closed Lock
GND
AUX
GND
SEN
GND
BUT
NO
COM
NC
AL-
AL+
DC12V
+12V
GND
GND
AUX
GND
SEN
GND
BUT
NO
COM
NC
AL-
AL+
7 Wiegand Reader Connection
Access controller
+12V
GND
Wiegand reader
INWD0
INWD1
12V
GND
WD0
WD1
Maximum 30V 3A input.
6
8 Barrier Connection
9 RS485 Connection
Barrier gate
+12V
GND
GND
485+
485-
12V
485B
485A
GND
TXD1
RXD1
GND
GND
GND
12V
12V
485 reader
12V
485B
485A
GND
TXD1
RXD1
GND
GND
GND
12V
12V
Note: 485A and 485B can be connected to the Barrier gate or the 485 Reader, separately, but cannot
be connected to the gate and reader at the same time.
11 Ethernet Connection
Connect the device and computer software over an Ethernet cable. An example is shown below:
: 192.168.1.201Default IP address
: 255.255.255.0 Subnet mask
: 192.168.1.130IP address
: 255.255.255.0 Subnet mask
Note: In LAN, IP addresses of the server (PC) and the device must be in the same network segment
when connecting to ZKBioSecurity software.
Click on [Comm.] > [Ethernet] > [IP Address], input the IP address and click on [OK].
10 Power Connection
12V3ADC
Recommended power supply: 12V - 3A
To share the power with other devices, use a power supply with higher current ratings.
7
ZKBioSecurity
12 UserRegistration
8
Clickon> [User Mgt.] > [New User] to register a new user. Settings include entering user ID and
name, face, password and profile photo, setting user role and access control role.
Method1: Register on the device
When there is no super administrator set in the device, click on to enter the menu. After setting the
super administrator, the system will request for the administrator’s verification before entering the menu.
For the security purpose, it is recommended to register a super administrator at the first time you use
the device.
Tap-to-Wake
Main Menu
User Mgt. User Role COMM. System
Data Mgt.Personalize Attendance
Search
Autotest System Info
Access Control
L
User Mgt.
New User
All Users
Display Style
L
Wednesday
3
1
*****
New User
User ID
Name
User Role
Face
Password
Profile Photo
Access Control Role
Normal User
1
Enroll Face
Mike
Method2: Register on ZKBioSecurity software
Please set the IP address and cloud service server address in the Comm. Menu option on the device.
9
Click [Access] > [Access Device] > [Device] > [Search Device] to search the device on the software.
When an appropriate server address and port is set on the device, the searched devices are displayed
automatically.
1.
Click [Add] in operation column, a new window will pop-up. Select Icon type, Area, and Add to Level
from each dropdowns and click [OK] to add the device.
For more details, please refer to the ZKBioSecurity User Manual.
2.
3.
4.
Refresh New Delete Export Search Device Device Control Set up View and Get Device Info Communication
Search Device
Search No device found? Download Search Tools to Local Disk
Total Progress
IP Address
IP Address
Device Type Serial Number
Searched devices count:2
Number of devices added:1
MAC Address Subnet Mask Gateway Address Serial Number Device Type Set Server Operations
192.168.0.31 255.255.255.0 192.168.0.1 S*********** This device has been added
Add
192.168.10.214 255.255.255.0 192.168.1.1
XXXX000000000
XXXX000000000 ProFace X [SL]
The current systen communication port is 8088, please make sure the device is set correctly.
Step 1
Step 2
Step 3
Add
Clear Data in the Device when Adding
Device Name *
Icon Type*
Area*
Add to Level
192.168.4.18
Door
Area Name
[Clear Data in the Device when Adding] will delete data in the device (except event
record), please use with caution!
OK Cancel
Step 4
Click [Personnel] > [Person] > [New] and fill in all the required fields to register a new users in the
software.
Click [Access] > [Device] > [Device Control] > [Synchronize All Data to Devices] to synchronize all
the data to the device including the new users.
Inhaltsverzeichnis
Andere ZKTeco IP-Zugriffskontrollsysteme Handbücher
ZKTeco
ZKTeco MultiBio 700 Bedienungsanleitung
ZKTeco
ZKTeco SA40 Bedienungsanleitung
ZKTeco
ZKTeco X8-BT Bedienungsanleitung
ZKTeco
ZKTeco MA500 Fehlerbehebungshandbuch
ZKTeco
ZKTeco LFace10 Bedienungsanleitung
ZKTeco
ZKTeco ProlD Series Bedienungsanleitung
ZKTeco
ZKTeco MB10-VL Bedienungsanleitung
ZKTeco
ZKTeco MB20-VL Bedienungsanleitung
ZKTeco
ZKTeco FR1200 Datenblatt
ZKTeco
ZKTeco SpeedFace-V3L Bedienungsanleitung
ZKTeco
ZKTeco SilkID F21-ID Bedienungsanleitung
ZKTeco
ZKTeco SpeedFace-V5L Bedienungsanleitung
ZKTeco
ZKTeco F6 Bedienungsanleitung
ZKTeco
ZKTeco Ultima Series Bedienungsanleitung
ZKTeco
ZKTeco ProCapture-WP Bedienungsanleitung
ZKTeco
ZKTeco LockerPad-7B Bedienungsanleitung
ZKTeco
ZKTeco FaceDepot-7BL Bedienungsanleitung
ZKTeco
ZKTeco IN710 Bedienungsanleitung
ZKTeco
ZKTeco OP-200 Bedienungsanleitung
ZKTeco
ZKTeco TF1600 ZKTeco Bedienungsanleitung
