Zte MF920US Bedienungsanleitung

MF920U

Quick Start Guide

Getting to Know Your Device

Appearance

The following gure is for your reference only.

1. Charging/micro-USB jack

2. Indicator light

3. Power key

• Press and hold for about 2 seconds to power on/

o󰀨 your device.

• Press and hold for about 10 seconds to power o󰀨

your device, if it is in abnormal status. And then

press and hold for about 2 seconds to power on

your device again.

4. WPS key

Press and hold for about 2 seconds to activate the WPS

function.

5. micro-SIM card slot and reset hole

Reset hole: Press and hold for about 2 seconds to restore

your device to the factory settings.

Getting to Know Your Device

Indicator lights

Indicator Status Description

Battery

Red solid /

blinking

The battery is low. Please

charge the battery.

Green

blinking

The battery is being charged.

Green

solid

The battery level is middle or

high.

Light o󰀨 Your device is powered o󰀨 and

not being charged.

Wi-Fi

Blue solid Wi-Fi is active.

Blue

blinking

WPS is active.

Light o󰀨 Wi-Fi is o󰀨.

SMS

Blue solid You have unread messages.

Blue

blinking

You have new messages or the

message storage is full.

Light o󰀨 There is neither an unread

message nor a new message.

Network

Red The device is in error status.

• The device is not

registered to the mobile

network.

• There is no micro-SIM card

inserted.

• There is no network

service available.

Green

solid

The device is registered to the

2G/3G mobile network.

Green

blinking

The device is connected to the

2G/3G mobile network and data

is being transferred.

Blue solid The device is registered to the

4G LTE network.

Blue

blinking

The device is connected to the

4G LTE network and data is

being transferred.

Getting to Know Your Device

Connection Scenarios

The device uses your micro-SIM card to access the

Internet. It allows multiple clients to surf on the Internet at

the same time. The following gure is for your reference

only.

Installing the micro-SIM Card

1. Open the micro-SIM card slot cover.

NOTE:

Do not remove the cover rudely, because it is connected

with the device.

2. Install a micro-SIM card to the micro-SIM card slot.

WARNING!

Your device does not support SIM cards, nano-SIM cards or

any other non-standard micro-SIM cards. To avoid damage

to the device, do not use those cards or any card holders.

3. Close the micro-SIM card slot cover.

Connecting to Your Device

Using Wi-Fi

1. Power on your device.

2. Ensure that your computer or other client devices

have enabled Wi-Fi, and search for available wireless

networks.

NOTE:

Refer to your Wi-Fi-enabled client device manual for further

details on how to search for wireless networks. If you use

a computer, you need to set your computer to obtain an IP

address automatically.

3. Select the Wi-Fi name (SSID) of your device, and click

Connect.

4. Enter the Wi-Fi password if necessary, and click OK.

NOTE:

Refer to the chapter Getting to Know the Wi-Fi SSID and

Password to get the default Wi-Fi SSID and password.

5. Wait until the client device is connected to your device

successfully.

Using a USB Cable

1. Connect a computer to your device with a USB cable.

2. Power on your device. The operating system detects

and identies new hardware, and automatically installs

the software.

NOTE:

If the system does not automatically launch installation,

you can double-click the device installation icon in My

Computer > ZTEMODEM to install the software.

3. Wait until the computer is connected to your device

successfully.

Getting to Know the Wi-Fi SSID and

Password

You can view the label on the device to get the default Wi-Fi

SSID and password.

Logging in to the 4G Mobile Hotspot

Conguration Page

1. Ensure that the connection between your device and the

client device is correct.

2. Launch the Internet browser and enter http://192.168.0.1

or http://u.ztedevice.com in the address bar.

3. Enter the password to log in to the 4G Mobile Hotspot

conguration page.

NOTE:

You can view the label on the device to get the default

password.

Changing the Wi-Fi SSID or Password

1. Log in to the 4G Mobile Hotspot conguration page.

2. Select Wi-Fi Settings.

3. Change the Network Name (SSID) or the Password in

the Main SSID area.

4. Click Apply.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Zte Netzwerk-Router Handbücher

Beliebte Netzwerk-Router Handbücher anderer Marken

Allnet

Allnet ALL0333AU Bedienungsanleitung

HomeSeer

HomeSeer HT-SEL Bedienungsanleitung

Sercomm

Sercomm Genesis OC3505D Bedienungsanleitung

Billion

Billion BIPAC 5102 Series Bedienungsanleitung

TP-Link

TP-Link TD-8817 Bedienungsanleitung

Motorola

Motorola MR1900 Bedienungsanleitung

Digi

Digi IX14 Bedienungsanleitung

Cisco

Cisco NCS 540 Handbuch

XAVi

XAVi X8821e Bedienungsanleitung

BEC

BEC 6200WZL Bedienungsanleitung

MikroTik

MikroTik hAP ac3 Series Bedienungsanleitung

Korenix

Korenix JetNet 5428G Series Bedienungsanleitung

NETGEAR

NETGEAR FS526T - Switch Bedienungsanleitung

Korenix

Korenix JetNet 5710G Series Bedienungsanleitung

Automated Logic

Automated Logic ZN551 Betriebsanleitung

Cisco

Cisco ASR 1000 Series Bedienerhandbuch

EnGenius

EnGenius ESR-9710 Bedienungsanleitung

Cisco

Cisco 805 Series Bedienungs- und Sicherheitshinweise