Zte MF286R Bedienungsanleitung

Andere Handbücher für MF286R

1

Inhaltsverzeichnis

Beliebte WLAN-Router Handbücher anderer Marken

Milesight

Milesight UG67 Bedienungsanleitung

Airlogic

Airlogic AirSync Class 1 Betriebsanleitung

Samsung

Samsung WCH730B Bedienungsanleitung

TELEFONICA

TELEFONICA USB Adapter Bedienungsanleitung

NETGEAR

NETGEAR PowerLINE WiFi 1000 Series Bedienungsanleitung

Askey

Askey RAC2V1K Bedienungsanleitung

Alloy

Alloy WLF2454AP-S Bedienungsanleitung

TP-Link

TP-Link TL-WR542G Bedienungsanleitung

NETGEAR

NETGEAR WNR2000v4 Bedienungsanleitung

Hama

Hama 53120 Bedienungsanleitung

Intellinet

Intellinet 524582 Bedienungsanleitung

Asus

Asus RT-N10P Bedienungsanleitung

D-Link

D-Link DIR-506L Bedienungsanleitung

Sapido

Sapido GR297n Bedienungsanleitung

Asus

Asus DSL-N55U Bedienungsanleitung

AMTC

AMTC WR7502 Bedienungsanleitung

Compaq

Compaq CP-2W - iPAQ Connection Point Bedienungsanleitung

SMC Networks

SMC Networks WBR14-N2 FICHE Bedienungsanleitung

MF286R

Let’s go

Getting started with your device.

1

LEGAL INFORMATION

Copyright © 2019 ZTE CORPORATION.

All rights reserved.

No part of this publication may be excerpted, reproduced, translated or

utilized in any form or by any means, electronic or mechanical, including

photocopying and microlm, without the prior written permission of ZTE

Corporation.

The manual is published by ZTE Corporation. We reserve the right to

make modications on print errors or update specications without prior

notice.

Version No. : R1.0

Edition Time: August 14, 2019

2

Getting to Know Your Device

External View

NOTE:

Please use the original external antenna if necessary.

3

Indicators

Indicator State Description

POWER Blue on Power is on and external power

supply is working normally.

O󰀨 Power is o󰀨 or external power

supply is working abnormally.

WIFI

Blue on Wi-Fi works normally with no

data transmission.

Blue Blinking Wi-Fi works normally with data

transmission.

O󰀨 Wi-Fi works abnormally or the

Wi-Fi function is disabled.

PHONE O󰀨 The phone is not in use.

Blue Blinking The phone is ringing.

Blue on The phone is in calling.

4

Indicator State Description

3G/4G

Red

The device is turned on but not

registered to the mobile network.

No (U)SIM card is inserted or

there is no network service

available.

Blue Blinking

The device is connected to the

LTE network and data is being

transferred.

Blue Solid The device is registered to the

LTE network.

Green Blinking

The device is connected to the

2G/3G network and data is being

transferred.

Green Solid The device is registered to the

2G/3G network.

SIG Blue on Signal level panel. Strength is

from weak to strong.

O󰀨 There is no signal or no (U)SIM

card is inserted.

NOTE:

The phone function needs the network support.

5

Buttons

Button Description

RESET Press and hold for about 3 seconds to restore factory

default congurations.

WLAN Press to turn o󰀨/on the Wi-Fi function.

WPS • Press to activate the WPS function.

• Press to wake device up.

Installing the (U)SIM card (optional)

Hold the (U)SIM card with the cut corner oriented as shown and slip it

into the card slot until you hear a click.

6

WARNINGS!

• Before installing the (U)SIM card, power o󰀨 your device and remove

the external power adapter.

• Your device does not support micro-SIM and nano-SIM card or any

other nonstandard (U)SIM cards. To avoid device damage, please

do not use them or any card holders.

7

Getting Started With Your Device

Connecting Your Device

Follow the number to connect your device.

If you select a di󰀨erent operation mode, the connection of the LAN port

will be di󰀨erent. Please refer to the chapter “Accessing the Internet”.

If you want to use the mobile network to connect to the Internet or use

your home phone, you need to insert your (U)SIM card rst.

8

Starting Your Device

CAUTION:

Your device must be placed in a well-ventilated environment. Do not

cover the device.

Slide the on/o󰀨 switch to start your device. After the device is initialized,

make sure the LED indicators are in normal status.

NOTE:

After your device is powered o󰀨, if you are called, the caller will hear

a prompt tone like “The subscriber you are dialing cannot be reached

now.”

Conguring Your PC

The following procedure describes how to congure the Internet

Protocol in Windows for your Wi-Fi connection.

1. Right-click

Network and select Properties.

2. Select

Change adapter settings.

3. Right-click

Wireless Network Connection and select Properties.

NOTE:

If you use a network cable to connect your PC to your device, you need

to right-click Local Area Connection and select Properties.