ZyXEL Communications Prestige 2000W Bedienungsanleitung

Prestige 2000W

VoIP Wi-Fi Phone

Quick Start Guide

Version WJ.00.10

3/2005

VoIPon Solutions www.voipon.co.uk [email protected] Tel: +44 (0) 1245 600560

Prestige 2000W Quick Start Guide

Overview

The Prestige 2000W is a wireless Voice over IP (VoIP) telephone. It combines the benefits of Internet

telephony, like cheaper calls, with mobility. This guide covers how to configure and use your Prestige to make

phone calls through the Internet. You can make and receive calls as long you are within range of an

IEEE802.11b enabled wireless network. See the User’s Guide for more information on all features.

Note: You should have Internet access and a voice account already set up.

This guide is divided into the following sections.

1 Hardware

You need the following.

Do the following to prepare the Prestige for use.

1Hardware

2The LCD Screen Menus

3Initial Configuration

4Phonebook

5Using the Prestige

6Accessing the Web Configurator

7Troubleshooting

Prestige Battery Charger Power Adaptor

VoIPon Solutions www.voipon.co.uk [email protected] Tel: +44 (0) 1245 600560

Prestige 2000W Quick Start Guide

1Place the Prestige face down, push down on the

grooves and slide the battery cover off.

2With the side of the battery with the CE label

facing up; align the three metal contacts on the

battery to the three corresponding contacts on the

telephone and press the battery down into place.

Note: DO NOT remove the battery’s plastic tab

3Connect the included power adaptor (use only

this adaptor) to the charger.

4Plug the power adaptor into an appropriate power

outlet.

5Set the Prestige on the charger. The Prestige automatically turns on.

Note: Charge the battery for five hours before using your Prestige.

VoIPon Solutions www.voipon.co.uk [email protected] Tel: +44 (0) 1245 600560

Prestige 2000W Quick Start Guide

6The battery indicator bar on the LCD display blinks. It stops blinking when the battery is fully charged.

7Remove the Prestige from the charger.

1.1 Keypad and Front Panel

1.2 Switching the Key-lock On and Off

The keys lock automatically if the Prestige is in standby mode for more than one minute.

Press and hold the # key for approximately 2 seconds to lock or unlock the keypad.

12:00

ZyXEL

Not registered

Menu Names

Use the Left key to select on-screen menu options.

Use the Right key to return to the previous menu.

You can also use this key as a shortcut to the

Prestige’s built-in phone book.

Use the arrow keys to navigate between menus and

move the cursor.

Use the Off/On key to reject or cancel calls. Press

and hold it for approximately 2 seconds to turn the

Prestige on or off.

Use the Call key to make and receive calls.

Use the numerical keypad to enter numbers and

characters.

VoIPon Solutions www.voipon.co.uk [email protected] Tel: +44 (0) 1245 600560

Prestige 2000W Quick Start Guide

2 The LCD Screen Menus

This section introduces the Prestige’s LCD screen menu system.

The Prestige initializes after you turn it on.

2.1 The Main Screen

The main screen displays after initialization. Hold down the # key for two seconds if the keypad is locked.

Names The bottom right displays the function of the Right key. Press the Right key from the main screen to

open the phonebook.

2.2 Navigating the Menus

Press the Left button to enter the menus.

After you enter the menus, use the Up or Down arrow keys to scroll through the menu items.

Initializing….

>>Please Wait!<<

shows the strength of the

wireless LAN signal.

Menu The bottom left displays the

function of the Left key. Press the Left

key from the main screen to open the

menus.

12:00

ZyXEL

Not registered

Menu Names

shows the battery’s current

charge.

Not registered is the Prestige’s current

connection status. Registered displays

after you properly configure the menu

settings and the Prestige connects to the

SIP proxy server.

• Press the Left key to access the selected menu item.

• Press the Right key to return to the previous screen.

Note: The Prestige restarts when you return to the main screen after

configuring the wireless LAN, network or SIP settings.

2. Call History

3. Phonebook

Select Back

1. Information

VoIPon Solutions www.voipon.co.uk [email protected] Tel: +44 (0) 1245 600560

Prestige 2000W Quick Start Guide

2.3 Text Input

3 Initial Configuration

Use the LCD screen menu system for initial configuration to make calls. Your service provider may have

already configured the settings for you.

Note: If your main screen already displays Registered, skip to Section 4 on page 17.

3.1 Wireless LAN Setup

When you turn the Prestige on, it searches for available wireless LAN Access Points (APs). It selects the AP

with the best signal and restarts and attempts to connect to it.

Use the following if you want to select a specific AP or enter a WEP key.

3.1.1 Site Survey

Do the following to browse the networks available in your area and select one.

• When you need to enter text or numbers in a screen, use the Off key to clear the

default text or backspace.

• Use the up and down arrows to select the type of characters (capital letters, lower-

case letters, numbers or symbols).

WEP key 1

**********

Ok Aa1@ Clear

1Select Wireless in the first menu screen (use the up or down arrow to highlight

it and then press the Left key).

8. Restart

1. Information

Select Back

2Select Site Survey.

3The Prestige checks for and displays a list of available APs. 2. SSID

3. Network Mode

Select Back

4The AP’s SSID is followed by a number describing its relative signal strength.

The higher the number, the better the signal. Select an AP to use.

5Stay in the Wireless menu and continue with the next section. AP2 90

AP3 85

Select Back

7. Wireless

1. Site Survey

AP1 99

VoIPon Solutions www.voipon.co.uk [email protected] Tel: +44 (0) 1245 600560

Prestige 2000W Quick Start Guide

3.1.2 WEP Encryption

WEP (Wired Equivalent Privacy) encryption scrambles all communication transmitted between the Prestige

and the AP to keep network communications private. Do the following if you were given a WEP key to use,

otherwise skip to Section 3.1.3 on page 8.

1Use the up or down arrow and the Left key to select WEP Select.

7. Profiles

8. Auth Type

Select Back

2Select the same length of WEP keys as the AP (64-bit or 128-bit).

[2] 64bit

[3] 128bit

Select Back

3Select a WEP key to configure.

8. WEP key 2

9. WEP key 3

Select Back

4The WEP key must be the same as on the AP. Use the left arrow button to clear

the default text. Use the up and down arrows to select the type of characters.

Enter the WEP key. Use the Left key to select Ok when you are done.

If you chose 64-bit WEP, then enter 5 ASCII characters or 10 hexadecimal

characters ("0-9", "A-F").

If you chose 128-bit WEP, then enter 13 ASCII characters or 26 hexadecimal

characters ("0-9", "A-F").

WEP key 1

**********

Ok Aa1@ Clear

5You can configure up to four WEP keys (in the same manner as the first) but

only one key can be selected (enabled) at any one time.

9. WEP key 3

10. WEP key 4

Select Back

6. WEP Select

[1] None

7. WEP key 1

8. WEP key 2

VoIPon Solutions www.voipon.co.uk [email protected] Tel: +44 (0) 1245 600560

Prestige 2000W Quick Start Guide

3.1.3 Profiles

Use a profile to save your wireless settings for future use.

3.2 Network Settings

Use this section to configure your Prestige to access the Internet.

If you were given a user name and password for Internet access, go to Section 3.2.3 on page 10.

6Select Key Select.

12. Profiles

13. Auth Type

Select Back

7Select the key that the AP is using.

8Stay in the Wireless menu and continue with the next section. Key 2

Key 3

Select Back

1Use the up or down arrow and the Left key to select Profiles.

8. Auth Type

1. Site Survey

Select Back

2Select Create to make a new profile.

2. Activate

3. Remove

Select Back

3Select a number for the profile and press the Left key. The profile uses the

name of the AP that you are using.

4Return to the main screen. The Prestige restarts.

Select Back

11. Key Select

Key 1

7. Profiles

1. Create

VoIPon Solutions www.voipon.co.uk [email protected] Tel: +44 (0) 1245 600560

Prestige 2000W Quick Start Guide

If you were given an IP address and subnet mask, go to Section 3.2.1 on page 9.

If you were not given an IP address and subnet mask, go to Section 3.2.2 on page 10.

3.2.1 Fixed IP

With this option you have to manually enter an IP address, subnet mask and gateway IP address. These are

given to you by the network administrator.

1Select Net Settings in the first menu screen (use the up or down arrow to

highlight it and then press the Left key).

5. SIP Settings

6. Settings

Select Back

2Select Network Mode.

2. IP Address

3. Subnet Mask

Select Back

3Select Fixed IP.

[2] DHCP

[3] PPPoE

Select Back

4Select IP Address.

3. Subnet Mask

4. Gateway

Select Back

5Use the left arrow button to clear the default text. Use the up and down arrows

to select the type of characters. Enter your IP address. Use the Left key to

select Ok when you are done.

IP Address

192.168.1.3

Ok Aa1@ Clear

6Select Subnet Mask.

4. Gateway

1. Network Mode

Select Back

4. Net Settings

1. Network Mode

[1] Fixed IP

2. IP Address

3. Subnet Mask

VoIPon Solutions www.voipon.co.uk [email protected] Tel: +44 (0) 1245 600560

Prestige 2000W Quick Start Guide

3.2.2 DHCP

If you do not have a specific IP address for your Prestige, use the following directions to set your Prestige to

get it automatically via DHCP (Dynamic Host Control Protocol).

3.2.3 PPPoE

7Clear the subnet mask and enter your’s. Subnet Mask

255.255.255.0

Ok Aa1@ Clear

8Select Gateway.

1. Network Mode

2. IP Address

Select Back

9Clear the gateway IP address and enter your’s.

10The Prestige restarts when you return to the main screen.

Gateway

192.168.1.1

Ok Aa1@ Clear

1Select Net Settings in the first menu screen (use the up or down arrow to

highlight it and then press the Left key).

5. SIP Settings

6. Settings

Select Back

2Select Network Mode.

2. IP Address

3. Subnet Mask

Select Back

3Select DHCP.

4The Prestige restarts when you return to the main screen. [3] PPPoE

[1] Fixed IP

Select Back

4. Gateway

4. Net Settings

1. Network Mode

[2] DHCP

VoIPon Solutions www.voipon.co.uk [email protected] Tel: +44 (0) 1245 600560

Andere Handbücher für Prestige 2000W

Inhaltsverzeichnis

Andere ZyXEL Communications IP-Telefon Handbücher

ZyXEL Communications

ZyXEL Communications V300-T1 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications V300 Series Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications V300-T1 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications V310 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications U250 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications V500 Series Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications V300 Series Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications V500-T1 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications Prestige P-2000W Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications PRESTIGE 2000W V2 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications V500 Series Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications V501-T1 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications Prestige P2000W V2 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications PRESTIGE 2000W V2 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications Prestige 2000W Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications Prestige P2000W V2 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications V-630 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications V300-T1 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications V310 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications V300-T1 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications Prestige P2000W V2 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications V500 Series Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications V300-T1 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications V-630 Bedienungsanleitung

Beliebte IP-Telefon Handbücher anderer Marken

Alcatel

Alcatel 4028 Bedienungsanleitung

Polycom

Polycom Polycom VVX 600 Bedienungsanleitung

Polycom

Polycom SoundPoint IP 450 Bedienungsanleitung

Cisco

Cisco SPA-500 Series Bedienungsanleitung

Polycom

Polycom SoundPoint IP 650 Bedienungsanleitung

Proximus

Proximus Maestro 3016 IP Bedienungsanleitung

Fanvil

Fanvil X4 Bedienungsanleitung

Cisco

Cisco 7962 Bedienungsanleitung

Snom

Snom 320 Bedienungsanleitung

Yealink

Yealink Yealink SIP-T46G Bedienungsanleitung

Avaya

Avaya 4625SW Bedienungsanleitung

Yealink

Yealink SIP-T52S Bedienungsanleitung

Nortel

Nortel 1140E Bedienungsanleitung

Nexotek

Nexotek NT-P500 Bedienungsanleitung

Avaya

Avaya Integral 5 R3.0 Bedienungsanleitung

GE 28320EE2 - Dect 6.0 InfoLink 2 Bedienungsanleitung

Avaya

Avaya 4600 Series Service-Handbuch

Mitel

Mitel MIVOICE OFFICE 400 6940 SIP Bedienungsanleitung