ZyXEL Communications V500 Series Bedienungsanleitung

V500 Series

IP Phone

Quick Start Guide

Version 1.00

8/2007

Edition 1

V500 Series Quick Start Guide

Overview

At the time of writing, this Quick Start Guide covers the following models:

• V500: IP Phone.

• V501: IP Phone with Power over Ethernet (PoE).

This Quick Start Guide shows you how to set up and use your V500. It includes the

following sections:

•Hardware and Connections - introduces the physical features of the V500 and shows you

how to connect it to your network.

•Initial Configuration - discusses how to set up your network configuration and SIP server

registration using the V500’s LCD screen and keypad.

•Phone Operation - covers how to use the V500’s basic telephone functions, such as mak-

ing a call.

You can also configure the V500 via the web configurator using a computer connected to

the V500’s PC port. See your User’s Guide for details.

V500 Series Quick Start Guide

1 Hardware and Connections

The following table describes some of the hardware features used for basic operations.

See the hardware chapter in your User’s Guide for full descriptions of all features.

1 Handset

2 LCD screen

3 Account keys

4Softkeys

5 Line keys

6 Menu

7 Navigator

8 Phonebook

9 Action keys

10 Alphanumeric

keypad

11 Microphone

12 Volume keys

13 Function keys

14 Custom keys

FEATURE DESCRIPTION

Account keys Use these to select the SIP account you want to use. You can configure up

to four SIP accounts on the V500.

Note: You can select an account only when it has been

configured (use the Advanced Setting > SIP

Configuration LCD screen menus to configure an

account).

V500 Series Quick Start Guide

1.1 Stand Installation

Attach the included stand, unless you want to hang the V500 on a wall (see your User’s

Guide for wall-mounting instructions).

There are four ways to attach the

included stand, as shown.

Softkeys These keys’ functions depend on the screen currently displayed on the LCD

screen. A word or symbol displayed on the LCD screen above a softkey

shows its current function.

Line keys Press these to select the phone line you want to use. The V500 has four

phone lines.

Menu Press this to display the V500’s configuration menu. Press it again to exit

the menu. The menu is not accessible when a call is in progress.

Navigator Press these keys to move around the V500’s screens. Press to go up

one line in a menu, and press to go down one line. Press to move

one space to the right, and press to move one space to the left. You can

also press to make a menu selection, and press to return to the

previous menu.

Phonebook Use this to display the list of contacts stored in the V500. You can add, edit

and delete phonebook entries from this screen.

Alphanumeric

keypad

Use these to enter numbers, letters and symbols. Use the # key to switch

between Number mode, Uppercase mode, Lowercase mode and Symbol

mode.

Microphone The microphone is active when the V500 is in speakerphone mode.

Volume keys Use the +key to increase the volume, and use the -key to decrease it.

• When you use the handset, these keys control the handset’s speaking

and listening volume.

• When you use the headset, these keys control the speaking and

listening volume on the headphone ( ) and microphone ( ) ports on

the V500.

• When you use the speakerphone, these keys control the internal

speaker and microphone (Mic) volume.

FEATURE DESCRIPTION

V500 Series Quick Start Guide

If you want to stand the V500 at its lower angle (nearer the

horizontal) use the holes marked 1in the following figure.

Use the holes marked 2to stand the V500 at its higher angle

(nearer the vertical).

Take the stand and connect it to the V500 as shown in the following figure.

1Insert the two connectors on the longer side of the stand first.

2Pivot the stand down until the other two connectors are inserted.

3Turn the V500 the right way up. Check that the stand is securely attached.

V500 Series Quick Start Guide

1.2 Rear Panel Hardware Connections

1WAN: Use an Ethernet cable to connect the V500 to your network.

V501 only: if you are using Power over Ethernet (PoE), connect the Ethernet cable

supplying power to this port. See Section 1.3 on page 6 for more information on PoE.

2PC(optional): Use an Ethernet cable to connect your computer to the PC port on the

V500 to access your network through the V500, or to configure the V500 using the web

configurator (see your User’s Guide for information on using the web configurator).

3 HANDSET: Connect the included handset cable to the HANDSET port on the V500.

Connect the other end to the handset. Hang up the receiver before you connect the

power.

4POWER: Connect the included power adaptor to the POWER socket on the V500. Plug

the power adapter into an appropriate power source.

V501 only: if you are using Power over Ethernet (PoE), you do not need to connect the

power adaptor.

V500 Series Quick Start Guide

1.3 V501 Only: Power over Ethernet (Optional)

Power over Ethernet (PoE) is the ability to provide power to your V501 via an 8-pin CAT 5

Ethernet cable, eliminating the need for a nearby power source.

A PoE injector (not included) is also needed to supply the Ethernet cable with power. This

feature allows increased flexibility in the location of your V501.

In the following figure, Zis your V501, A is the CAT 5 Ethernet cable, B is the PoE injector

and Cis the power cable.

2 Initial Configuration

This section describes how to use the phone’s LCD screen menus to:

•Set up Your Network Connection

and

•Set up Your Voice Account

The phone does not need to be connected to a computer to do this.

"When entering information, use the # key to cycle between Uppercase,

Lowercase, Symbol and Number modes. The current mode is displayed

on the LCD screen.

Press a key multiple times to access the different characters. For example,

in Uppercase mode press 9four times to enter “Z”.

V500 Series Quick Start Guide

2.1 Set up Your Network Connection

When you have finished your hardware

connections, look at the LCD screen. The V500

displays your Voice over Internet (VoIP) account

registration status in the tabs on the right, and time

and date details in the top section.

The V500 allows you to configure up to four VoIP

accounts (also known as SIP accounts). When a

VoIP account is not active, Unused displays. When

an account is active but not successfully

registered, No Reg displays in the tab. When an

account is active and successfully registered, the

tab displays the account name (SIP 1 in this

example).

VIf the LCD screen displays nothing, recheck your hardware connections.

See section 1.2.

Follow these steps to configure your network settings.

1Press the Menu key, and use the navigator to

select Advanced Setting. Press Select.

"You can also use the alphanumeric keypad to make your selections in the

LCD screen. For example, you can press the 6 key in the Menu Setting

screen (above) to go to the Advanced Setting screen.

11:45 2006-12-12

SIP 1

Unused

ZyXEL

Menu Setting

1 System Info

2 Ring Setting

3 Volume Setting

4 Call Preference

5 Phonebook

6 Advanced Setting

7 System Restart

8 Feature Code Show

Select Back

V500 Series Quick Start Guide

2Select Network Setting.

Choose from the following options:

• If you were given a username and password for

network access, go to section 2.1.1 on page 8.

• If you were given an IP address and subnet mask

to use, go to section 2.1.2 on page 9.

• If you were not given an IP address to use, go to

section 2.1.3 on page 10.

2.1.1 Set Up PPPoE

1If you were given a username and password,

select PPPoE (Off) in the Advanced Setting >

Network Setting menu. Press the On softkey to

have the V500 use PPPoE.

The screen displays PPPoE (On). Press Select

to enter your information.

2Press 1to enter the user name for your

account.

Advanced Setting

1 Network Setting

2 SIP Configuration

3 Auto Provision (Off)

4 Programmable Feature Key

5 Display Adjusting

Select Back

Network Setting

1 PPPoE (On)

2 Static IP (Off)

3 DHCP (Off)

Select On Back

PPPoE

1 Username

2 Password

Select Back

V500 Series Quick Start Guide

3The PPPoE Username screen displays. Press

Edit and enter your user name.

Press Save when you are done, then press 2to

enter the PPPoE Password screen. Press Edit.

4Enter your password, then go down to Confirm

and re-enter it. Press Save when you are done.

2.1.2 Set Up a Static IP Address

PPPoE Username

Current:

New: User123

Number mode

Save <- Back

Edit Password

Current:

New: NewPassword

Confirm: NewPassword

Lowercase mode

Save <- Back

Andere Handbücher für V500 Series

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere ZyXEL Communications IP-Telefon Handbücher

ZyXEL Communications

ZyXEL Communications V300-T1 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications V-630 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications V-630 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications U250 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications Prestige 2000W Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications V300 Series Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications V500-T1 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications Prestige 2000W Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications Prestige P2000W V2 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications V-630 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications V310 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications V300 Series Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications V300-T1 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications V300-T1 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications V300-T1 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications PRESTIGE 2000W V2 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications Prestige P-2000W Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications Prestige 2000W Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications V300 Series Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications V500 Series Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications V501-T1 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications Prestige 2000W Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications Prestige P2000W V2 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications V500 Series Bedienungsanleitung

Beliebte IP-Telefon Handbücher anderer Marken

Alcatel

Alcatel 4028 Bedienungsanleitung

Polycom

Polycom Polycom VVX 600 Bedienungsanleitung

Polycom

Polycom SoundPoint IP 450 Bedienungsanleitung

Cisco

Cisco SPA-500 Series Bedienungsanleitung

Polycom

Polycom SoundPoint IP 650 Bedienungsanleitung

Proximus

Proximus Maestro 3016 IP Bedienungsanleitung

Fanvil

Fanvil X4 Bedienungsanleitung

Cisco

Cisco 7962 Bedienungsanleitung

Snom

Snom 320 Bedienungsanleitung

Yealink

Yealink Yealink SIP-T46G Bedienungsanleitung

Avaya

Avaya 4625SW Bedienungsanleitung

Yealink

Yealink SIP-T52S Bedienungsanleitung

Nortel

Nortel 1140E Bedienungsanleitung

Nexotek

Nexotek NT-P500 Bedienungsanleitung

Avaya

Avaya Integral 5 R3.0 Bedienungsanleitung

GE 28320EE2 - Dect 6.0 InfoLink 2 Bedienungsanleitung

Avaya

Avaya 4600 Series Service-Handbuch

Mitel

Mitel MIVOICE OFFICE 400 6940 SIP Bedienungsanleitung