ZyXEL Communications Prestige P-662HW-61 Bedienungsanleitung

ZyXEL Confidential

340QR5C1.doc 1/38

ZyXEL

Firmware Release Note

Prestige 662HW-61

Standard Version

Release 3.40(QR.5)C1

Date: Feb 15, 2005

Author: Keil Chu

ZyXEL Confidential

340QR5C1.doc 2/38

ZyXEL Prestige 662HW-61 Standard Version

Release 3.40(QR.5)C1

Release Note

Date: Feb 15, 2005

Supported Platforms:

ZyXEL Prestige 662HW-61

Versions:

ZyNOS Version : V3.40(QR.5) | 12/2/2004 19:16:06

Bootbase Version : V1.10t | 1/17/2005 15:54:30

Notes:

The Prestige 662HW-61, is 4th generation of ZyXEL ADSL product family. It is a high

performance ADSL/ADSL2/ADSL2+ router for small/medium office to have Internet

access and LAN-to-LAN application over the existing copper line. P662HW-61 takes

advantage of much higher data rate than ADSL, speed up to 12Mbps (ADSL2) or 26Mbps

(ADSL2+), greater reach, faster start-up, advanced diagnostics and better power

management. This high performance ADSL router is a high integrated advanced Firewall,

Bandwidth Management and IEEE 802.11g wireless features to meet the demand of

high-end market.

P662HW-61 provides an embedded mini-PCI module for 802.11g Wireless LAN

connectivity, four single auto-sensing, auto-detection 10/100BASE-T Ethernet ports for

connection to the user’s local network, and a single RJ-11/RJ-45 port for connection to

ADSL/ADSL2/ADSL2+ line.

Internal Information:

Modifications in V 3.40(QR.2)b2 | 06/28/2004

1. [FEATURE ENHANCE]

Symptom: Support multicast firmware upgrade tools on PC, please refer to related

document for details.

Condition: N/A

1.Known Issues:

1. US Robotics modem is not supported for dial backup

2. If user wants to register to extend expired date, packet-Scan engine won’t send out

expired date request until 6th checking with Packet-Scanning server.

ZyXEL Confidential

340QR5C1.doc 3/38

3. If device LAN is connected with a switch, and device reboots, then the PC with Any-IP

can't connect with device until ARP entry is cleared by PC.

4. WLAN has Beacon failure problem when the channel is in very busy/dirty condition

5. In Web/GUI, the MBM wizard successful page is English only.

2.Features:

Modifications in V 3.40(QR.5)C1 | 02/15/2005

1. update bootbase to change MAC OUI from 00A0C5 to 001349(short term solution)

Modifications in V 3.40(QR.5)C0 | 12/2/2004

1. [FEATURE CHANGE]

Change to FCS version.

Modifications in V 3.40(QR.5)b2 | 11/29/2004

1. [BUG FIX]

Symptom: In “VC auto hunt failed” page, if we change the HTTP port number in

smt24.11, and then the “here” hyperlink can’t connect to eWC.

Condition: N/A

2. [BUG FIX]

Symptom: If the Web site is blocked by CAC Web control function, then the

centralized logs can’t display correct username and URL address in logs.

Condition: N/A

3. [FEATURE CHANGE]

Symptom: The default ESSID of wireless is changed to “ZyXEL”

Condition: N/A

4. [BUG FIX]

Symptom: In PPPoE mode, if uses the CI command “device drop channel all”, the

PPPoE can’t dial up any more.

Condition: N/A

5. [BUG FIX]

Symptom: Turn on Anti-Virus to scan HTTP packets, and go to the Web site

“http://www.alltime.ru/watch.shtml”, device will get exceptions.

Condition: N/A

Solution: Update the AV engine to 0.18 can fix this bug.

6. [BUG FIX]

Symptom: In eWC, the F/W upload page doesn’t have password protection.

Condition: N/A

7. [BUG FIX]

Symptom: For SIP pass-through feature, if the SIP client uses an account with IP

address like [email protected] , then our router will modify the IP address field, and

causes the SIP connection failed.

Condition: N/A

Solution: It is not necessary to modify the SIP tag “from”, and “to” field at any time.

Modifications in V 3.40(QR.5)b1 | 11/18/2004

1. [BUG FIX]

ZyXEL Confidential

340QR5C1.doc 4/38

Symptom: The Web redirect function can’t work if HTTP port number is changed by

remote management function.

Condition: N/A

2. [BUG FIX]

Symptom: Device will crash when doing PAP with INode PPPoE server

Condition: If PPPoE server uses PAP and then our device receive a packet PAP ACK

or PAP NAK, but it only happens in Inode server.

3. [BUG FIX]

Symptom: When delete SMT4 and the ADSL mode changes to multi mode

automatically even we configure it as G.DMT

Condition: N/A

4. [BUG FIX]

Symptom: IPSec Transport mode will be treated as Tunnel mode

Condition: N/A

5. [BUG FIX]

Symptom: The IP Alias is active in rom-t, but it is actually inactive in SMT

Condition: N/A

6. [BUG FIX]

Symptom: DNS server can't work after configuring DNS server in smt3.2 or web LAN

page, it need reboot system to let DNS server work.

Condition: N/A

7. [BUG FIX]

Symptom: Routing table doesn't update when change different remote IP in SMT4 and

encapsulation is ENET ENCAP.

Condition: N/A

8. [BUG FIX]

Symptom: In Web/GUI firewall rule summary page there is no LAN to WAN ACL set

Condition: N/A

9. [BUG FIX]

Symptom: In Web/GUI, changing the setting of Windows Networking (NetBIOS over

TCP/IP) in DMZ setting page will cause system reboot

Condition: N/A

10. [BUG FIX]

Symptom: Customers report that can’t build VPN tunnel between 2 devices when using

DES/3DES encryption, but after we changing the AES encryption the tunnel is built

OK.

Condition: N/A

11. [BUG FIX]

Symptom: In smt3 2, we change nothing but it still save to ROM file

Condition: N/A

12. [BUG FIX]

Symptom: Use ENET ENCAP mode, traffic redirect/Dial backup function can't work

fine if the destination IP is in the same subnet with WAN IP address.

Condition: N/A

ZyXEL Confidential

340QR5C1.doc 5/38

Modifications in V 3.40(QR.4)C0 | 10/01/2004

1. [FEATURE CHANGE]

Symptom: Change to FCS version

Condition: N/A

Modifications in V 3.40(QR.4)b2 | 09/30/2004

1. [BUG FIX]

Symptom: The router gets exception when a client PC runs a port scan tool “bonk”.

Condition: N/A

2. [BUG FIX]

Symptom: User can’t login to embedded Web/GUI, if PC uses windows XP and

installed service pack 2, and the system UPnP is enabled.

Condition: Only happens when UPnP function is enabled.

Modifications in V 3.40(QR.4)b1 | 09/22/2004

1. [BUG FIX]

Symptom: Enable email Anti-Virus packet scanning function, then system gets

exception when doing email stress test.

Condition: N/A

2. [BUG FIX]

Symptom: For Zero-Configuration feature, when VC auto hunt successfully, and the

display PPPoE username/password page, but input wrong value, the Web page will be

always in testing state.

Condition: N/A

Modifications in V 3.40(QR.2)b6 | 09/16/2004

1. [BUG FIX]

Symptom: Configuring the bandwidth of MBM class by command “bm

defaultClassBw 20 (kbps)”, but it doesn’t work.

Condition: N/A

2. [BUG FIX]

Symptom: Register and Activate CAC but disable it, and configure some Web

categories to block web sites and then uses browser to get on Internet, the system will

get exception.

Condition: N/A

3. [BUG FIX]

Symptom: Using Web/GUI to update firmware, the Web page will display error

message.

Condition: N/A

4. [BUG FIX]

Symptom: Reset to default ROM file, and after Anti-Virus activated, the first time to

update AV engine will get failed, but it only found in PQA’s environment.

Condition: N/A

5. [BUG FIX]

ZyXEL Confidential

340QR5C1.doc 6/38

Symptom: The Zero-configuration(VC auto-hunting) is not turned on by default.

Condition: N/A

6. [BUG FIX]

Symptom: Configuring ATUR two remote nodes with PPPoE mode, after two PVC

are connected, change the DSLAM first PVC setting with a wrong VPI/VCI. Drop the

first PVC in ATUR, and dial it again, the first PVC (PPPoE) still can dial up

successfully.

Condition: N/A

7. [BUG FIX]

Symptom: DNS resolving wrong, if the ping an address from console like

“www.123.com”, system resolves as 0.123.0.0.

Condition: N/A

8. [BUG FIX]

Symptom: NetMeeting can’t be connected when the connection is from WAN to LAN

Condition: N/A

9. [BUG FIX]

Symptom: Configure a MAC address and IP address in static DHCP pool, if a PC is

requesting IP by DHCP but it is not in the static DHCP pool, the system will assign the

IP address which is belong to static DHCP pool.

Condition: N/A

10. [FEATURE CHANGE]

Symptom: In CAC feature, configure 4 groups name “GROUP1” to “GROUP4” by

default.

Condition: N/A

11. [BUG FIX]

Symptom: In AV feature, the E-Mail scanning will cause our CPU loading to reach to

100% and SMT will hang up for a few seconds.

Condition: Only happens when receiving E-Mail attachments and E-Mail AV scanning

is enabled.

12. [FEATURE ENHANCE]

Symptom: Enhance CI command under “lan” to support DMZ interface, please refer to

appendix – CI command list for details.

Condition: N/A

13. [FEATURE ENHANCE]

Symptom: If WLAN card is not existed, system will change product name

automatically to “P662H-61”.

Condition: N/A

14. [BUG FIX]

Symptom: In Web/GUI, change PPPoE pass-through from “No” to “Yes” but the

function can’t work immediately, but after reboot it can work fine.

Condition: N/A

15. [BUG FIX]

Symptom: The string “Enter Menu selection number:" display two times in SMT 15.1

Condition: N/A

16. [FEATURE CHANGE]

Symptom: In Web/GUI, content filter keyword blocking page if we key in capital letter

ZyXEL Confidential

340QR5C1.doc 7/38

then the content filter function can't work.

Condition: N/A

Solution: Use case-insensitive type instead of case-sensitive for keyword search.

17. [BUG FIX]

Symptom: When multiple stations connected to AP, once the previous one leave, the

other stations also disappeared.

Condition: N/A

18. [BUG FIX]

Symptom: Use CI command ”wlan association” to show association list will cause

system reboot.

Condition: When 3 stations connect to device if user uses CI command ”wlan

association” to show association list will cause system reboot

19. [BUG FIX]

Symptom: When Cerberian server stop the service, our request to Cerberian will get

“request error”, at that time, uses CAC will cause system exception.

Condition: Happens only when Cerberian server stop service, and our reqest will get

“request error”.

20. [BUG FIX]

Symptom: In AV feature, the message “scanned by GGreat” message will appear in

Email when virus detected

Condition: N/A

Modifications in V 3.40(QR.2)b5 | 08/11/2004

1. [BUG FIX]

Symptom: In Web/GUI, firewall page, the help about the customized services is

updated

Condition: N/A

2. [FEATURE CHANGE]

Symptom: In Web/GUI, CAC time scheduling should be "from Midnight to 24:00PM”

by default.

Condition: N/A

3. [BUG FIX]

Symptom: In Web/GUI CAC/Web category page, if user clicks "more…" to extend the

categories, and then click "basic…", the Web page swapping is very slow.

Condition: N/A

4. [BUG FIX]

Symptom: Enable the CAC, and then reboot device, and then PPPoE connection can’t

be dialed up by packets.

Condition: N/A

5. [BUG FIX]

Symptom: In CAC feature, when time budget is used up, it should not show "Idle Time

out" in small logout windows.

Condition: N/A

6. [BUG FIX]

ZyXEL Confidential

340QR5C1.doc 8/38

Symptom: In content filter, the schedule function and trusted user IP don’t work

Condition: N/A

7. [BUG FIX]

Symptom: WEB translation and characters of DHCP relay page has error in French

language.

Condition: N/A

8. [BUG FIX]

Symptom: The French login page is Germany, and the Germany login page is French

Condition: N/A

9. [BUG FIX]

Symptom: In French windows OS, the CAC budget left timer do not run

Condition: N/A

10. [BUG FIX]

Symptom: In eWC, the DMZ page, RIP version default should be N/A

Condition: N/A

11. [BUG FIX]

Symptom: When click "Activation" and "update now" of the anti-virus, system needs

to display a warning message that is to warn device needing reboot

Condition: N/A

12. [BUG FIX]

Symptom: When CAC turn on, the NAT server set (port forwarding) can’t work

Condition: N/A

Solution: If CAC is turn on, and LAN server should accept incoming request from

external side, if LAN PC is configured in NAT server set.

13. [BUG FIX]

Symptom: System is configured as PPPoE, after PPPoE is idle timeout, and then start

IE to trigger PPPoE, but it will redirect to "enter the username and password" page. It

problem also happens when the WAN link switch from dial backup to DSL link.

Condition: N/A

14. [BUG FIX]

Symptom: Using dial backup, the Web dynamic category block function of CAC do

not work, and device sometimes reboot when using IE to get web page

Condition: N/A

15. [BUG FIX]

Symptom: Reset to default configuration, using Web/GUI connection wizard to setting

connection to be PPPoE, after diagnostic is successful, and then starting the IE, it can

not get on Internet.

Condition: N/A

16. [FEATURE ENHANCE]

Symptom: In Web/GUI Anti-Virus, the item “Default action when session overflow”

supports multi language.

Condition: N/A

17. [FEATURE ENHANCE]

Symptom: In Web/GUI BW-Mgnt, the help page is updated for dynamic service H.323

and FTP

Condition: N/A

ZyXEL Confidential

340QR5C1.doc 9/38

18. [FEATURE ENHANCE]

Symptom: In Web/GUI MBM Wizard, the help and multi language is supported.

Cndition: N/A

19. [FEATURE ENHANCE]

Symptom: The redirected Web pages of Zero-Configuration support multi language

Condition: N/A

20. [FEATURE ENHANCE]

Symptom: In Web/GUI, CAC page supports help and support multi language.

Condition: N/A

21. [FEATURE ENHANCE]

Symptom: In Web/GUI, firewall page, the help in customized services support multi-

language

Condition: N/A

22. [BUG FIX]

Symptom: In MBM advance, add a class and budget is over than root budget, system

will save it anyway with a warning message, if you go to Wizard system will return an

error also.

Condition: N/A

23. [BUG FIX]

Symptom: In eWC CAC feature, if admin is login-in, system will allow the PC to

connect Internet but if admin is timeout from eWC, the PC still can connect Internet

Condition: N/A

Solution: If Admin is timeout or logout, the PC should redirect to login page.

24. [BUG FIX]

Symptom: The throughput from LAN to WLAN is only 10Mb around when tested by

Chariot tool.

Condition: N/A

25. [FEATURE ENHANCE]

Symptom: The AV engine is updated to version 0.13.

Condition: N/A

26. [FEATURE ENHANCE]

Symptom: In logs page, add alert for Anti-Virus feature, that means if virus is detected

system can send an email to Admin immediately.

Condition: N/A

27. [FEATURE ENHANCE]

Symptom: Add a command “bm defaultClassBw” to adjust the default bandwidth of

class for MBM.

Condition: N/A

28. [BUG FIX]

Symptom: When system receive OAM AIS packet, the data channel will be corrupted

and can’t be recovered until ADSL drop and connected again.

Condition: N/A

Modifications in V 3.40(QR.2)b4 | 07/16/2004

1. [FEATURE ENHANCE]

ZyXEL Confidential

340QR5C1.doc 10/38

Symptom: Support CAC (Content Access Control) feature, please refer to external

specification or appendix for details.

Condition: N/A

2. [FEATURE ENHANCE]

Symptom: Support Vantage CNM

Condition: N/A

3. [BUG FIX]

Symptom: If WAN (ISP) provides static IP address, and the VC auto-hunt is active,

then the hunting will fail always.

Condition: N/A

Solution: If WAN (ISP) provides static IP address, the VC auto-hunt feature should be

turn off in SMT4, SMT11, and connection Wizard.

4. [FEATURE CHANGE]

Symptom: The default ROM file setting of DMZ- RIP should be turned off

Condition: N/A

5. [BUG FIX]

Symptom: In Web/GUI, spelling error in firewall customized port hyperlink, and

change to multi language the customized port link will display error.

Condition: N/A

6. [BUG FIX]

Symptom: In Web/GUI, NAT page, click edit details, and change NAT setting to full

feature and don’t apply it, but it always configured as full feature.

Condition: N/A

7. [BUG FIX]

Symptom: In Anti-Virus page, the activating and update function display successfully

but the expire date is still old (1970/01/01).

Condition: N/A

8. [BUG FIX]

Symptom: Turning on Anti-Virus debug flag will cause update function failed

Condition: N/A

Modifications in V 3.40(QR.2)b3 | 07/08/2004

1. [BUG FIX]

Symptom: DMZ can’t work fine when promiscuous mode is enabled.

Condition: N/A

2. [BUG FIX]

Symptom: In MBM Wizard, disable active button then go next the device will get

exception

Condition: N/A

3. [BUG FIX]

Symptom: In MBM Web/GUI, change the FTP priority in advance setup, and then goes

to Wizard, and the priority item doesn’t go to “others”.

Condition: N/A

4. [BUG FIX]

Symptom: In MBM Web/GUI, add a class (for example port 80) in advance and then

Andere Handbücher für Prestige P-662HW-61

Inhaltsverzeichnis

Andere ZyXEL Communications Netzwerk-Router Handbücher

ZyXEL Communications

ZyXEL Communications P-663H-51 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications Prestige 650HW Handbuch

ZyXEL Communications

ZyXEL Communications P-2602R-D1A Handbuch

ZyXEL Communications

ZyXEL Communications Prestige 650 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications Prestige 645R-A Series Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-660R-T1 v3 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-335 Plus Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications GS-2724 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications Prestige 650H-E Series Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications Prestige 100 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P8802T Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-334 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications Prestige 2602HW-C Series Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications ADSL2+ Ethernet / USB Router P-660RU-Tx v2 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications Prestige 2602HWL-D3A Montageanleitung

ZyXEL Communications

ZyXEL Communications VMG3925 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications FR1000Z Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications GS-1116A Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-660RU-Tx v3 SERIES Handbuch

ZyXEL Communications

ZyXEL Communications NBG7510 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications LTE Series Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications NR2101 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-660HN-T1H Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-2812HNU-51c Bedienungsanleitung

Beliebte Netzwerk-Router Handbücher anderer Marken

Allnet

Allnet ALL0333AU Bedienungsanleitung

HomeSeer

HomeSeer HT-SEL Bedienungsanleitung

Sercomm

Sercomm Genesis OC3505D Bedienungsanleitung

Billion

Billion BIPAC 5102 Series Bedienungsanleitung

TP-Link

TP-Link TD-8817 Bedienungsanleitung

Motorola

Motorola MR1900 Bedienungsanleitung

Digi

Digi IX14 Bedienungsanleitung

Cisco

Cisco NCS 540 Handbuch

XAVi

XAVi X8821e Bedienungsanleitung

BEC

BEC 6200WZL Bedienungsanleitung

MikroTik

MikroTik hAP ac3 Series Bedienungsanleitung

Korenix

Korenix JetNet 5428G Series Bedienungsanleitung

NETGEAR

NETGEAR FS526T - Switch Bedienungsanleitung

Automated Logic

Automated Logic ZN551 Betriebsanleitung

Cisco

Cisco ASR 1000 Series Bedienerhandbuch

EnGenius

EnGenius ESR-9710 Bedienungsanleitung

Cisco

Cisco 805 Series Bedienungs- und Sicherheitshinweise

LevelOne

LevelOne FBR-1416 Bedienungsanleitung