ZyXEL Communications Home Station VDSL2 Bedienungsanleitung

Home Station

VDSL2

Libertad

en una caja.

User’s guide

For further information please refer to the user’s manual on the advanced settings CD, section 2, or

the glossary section in this guide.

Package contents

(5) Advanced settings CD

VDSL2

(6) Warranty card

This guide details about the start up process for your Internet connection. You will be

able to enjoy your connection in an easy, simple and quick way. Please follow the guide

instructions step by step.

(2) Power adapter (3) Telephone line cable

(4) Ethernet cable

(1) Home Station VDSL2

Wifi

Power

DSL

Internet

234

For further information please refer to sections 3.2 and 3.3 of the user’s manual on the advanced

settings CD

Start using your VDSL...

1. Telephone line connection

Connect the grey telephony line cable (3)

to the telephone line socket and to the

connector of the Home Station VDSL2

labeled as DSL.

DSL Reset

Eth1 Eth2 Eth3 Eth4 USB Wifi On/Off

12V 1A

Power

DSL 3

2. Power adapter connection

Plug the power adapter (2) into the mains

supply and into the 12V 1A connector of

the Home Station VDSL2.

OFF

DSL Reset

Eth1 Eth2 Eth3 Eth4 USB Wifi On/Off

12V 1A

Power

For further information please refer to sections 3.4 of the user’s manual on the advanced

settings CD

3. Switching on the router

Turn the router on by putting the switch into the ON position. Wait for a few minutes until

the LEDs shine as shown below.

Indicator

Current status Description

Power ON (green) Status of the power supply.

Ethernet 1-4 OFF Status of Ethernet connection.

Wiﬁ ON (green) Status of wireless network.

Internet ON (green) Status of internet connection.

DSL ON (orange) Connectivity established with the exchange.

3G OFF For future use.

The routers provided by Movistar are optimised so that they can establish the connec-

tion with Internet without any need for installations or conﬁgurations.

Power Wi 3G

DSL Internet

Ethernet

12 3 4

Power Wi 3G

DSL Internet

Ethernet

12 3 4

Movistar can make a remote update of your equipment to offer you a better service.

During this update process the power and 3G indicators will ﬂash in green while Wiﬁ and

DSL indicators ﬂash in orange and Internet indicator ﬂashes in red.

Warning: Don’t turn off your Home Station VDSL2 while it is upgrading

because it could damage your equipment.

After about 6-8 minutes the power indi-

cator (the ﬁrst one from the left) will light

up in ﬁxed green indicating the end of the

process.

OFF

You may either connect your computer to the router using an Ethernet cable if they are

sufﬁciently close to each other or by means of a wireless network. Furthermore, you can

simultaneously have certain items of equipment connected to the router using the Ether-

net cable and others as portable through the wireless network.

You can use the wireless network as long

as your computer is equipped with a wire-

less adapter installed or this is integrated

into your equipment.

Your router has enabled the wireless

network by default. If it would not be

enabled, the ﬁrst step would be to enable

the wireless network for your router. This

is done by pressing the button Wiﬁ loca-

ted at the back of the router within four

seconds (pressing it during eight seconds

would activate the WPS process). The Wiﬁ

indicator will light up in green and will blink

when navigating.

The conﬁguration parameters by default

for your wireless network are shown on

the label at the bottom of your router.

The next step is to conﬁgure the compu-

ters on your wireless network in accordan-

ce with your router’s wireless parameters.

A. Connection using wireless network

DSL Reset

Eth1 Eth2 Eth3 Eth4 USB Wifi On/Off

12V 1A

Power

Wifi

DSL Reset

Eth1 Eth2 Eth3 Eth4 USB Wifi On/Off

12V 1A

Power

4. Connecting the computer to the router. Two options are available

Start using your VDSL...

For further information please refer to sections 3.5 of the User’s manual on the advanced settings

If you are equipped with an

external wireless device (PCM-

CIA or USB adapter), install it

with the aid of the CD that is

provided with it. If you have a

wireless device that is already

integrated into your equipment, make

sure that it is enabled with the aid of your

operating system.

Press the WPS button on the wireless

client device (check the device’s docu-

mentation to see the details about this).

You have two minutes for setting up the

connection using WPS and, after this time,

the router doesn’t allow connection using

WPS any more.

Connection using WPS

The router can use WPS for setting up a

secure wireless network. Your wireless

client device must support WPS for using

it. Otherwise, use the method explained

in “Connection using Windows wireless

client”.

Press the Wiﬁ button located at the back

of the router during eight seconds and

release it (pressing it during four seconds

would enable or disable the wireless

network).

For further information please refer to sections 3.5 of the user’s manual on the advanced settings

CD.

Power Wi 3G

DSL Internet

Ethernet

12 3 4

Connection using Windows wireless

client

When conﬁguring your wireless device in

Windows XP SP2, Vista or Windows 7 you

can use the wireless client management

application. For Windows XP SP2 or Vista,

press with the right mouse button on the

wireless network connection icon on the

system tray (next to the clock) and select

“View available wireless networks”. For

Windows 7, press with the left mouse

button on the same icon. For other ope-

rating systems refer to the wireless client

assistance manual.



For further information please refer to sections 3.5 of the user’s manual on the advanced settings

CD.

Search the available wireless networks.

You can update this list with the button

“Refresh network list” or by clicking the

button

Select the network whose identiﬁer (SSID)

is the one that appears on the router label

and press on Connect.

Connect to the wireless network (to do

this, use the Connect or OK button).

Enter the security key that appears on the

router label.

IMPORTANT. The wireless security key

for the router is of the WPA/PSK type and

its format is alphanumerical. Make sure

you enter that security key exactly as it

appears on the label.

Check to make sure that the wireless net-

work connection icon for the system tray

indicates that the connection has been

correctly established.

For further information please refer to section 3.3 of the user’s manual on the advanced settings CD.

Connect the yellow Ethernet cable (4) to

the Ethernet card on the PC and to one of

the router’s connectors labeled as Eth1 to

Eth4.

Switch the PC on. The ETHERNET

indicator will light up in green after a few

seconds. This led will blink when transfe-

rring data.

Power Wi 3G

DSL Internet

Ethernet

12 3 4

B. Connection using Ethernet cable

DSL Reset

Eth1 Eth2 Eth3 Eth4 USB Wifi On/Off

12V 1A

Power

DSL Reset

Eth1 Eth2 Eth3 Eth4 USB Wifi On/Off

12V 1A

Power

Congratulations, now you can access Internet

using your VDSL !

Open your browser, go to the web address www.movistar.es and start

surﬁng the net.

Should you not be able to access, please see refer to the Solutions to fre-

quent problems in this guide.

Activate your free e-mail accounts and your website with the Internet

access service contracted.

Once you have accessed www.movistar.es, you can activate your mail account. After ty-

ping in the initial identiﬁcador (user) and contraseña (password) provided in the letter with

the service data or the one obtained calling 900 50 20 10 from the telephone line where

you have installed the VDSL service, you will access a website where you can publish your

personal web pages.

Protect your PC

Once you are connected to the VDSL service we strongly recommend you to protect your

PC against Internet viruses or attacks. If you wish to do so, you can contract these servi-

ces (Antivirus PC, Anti-Intrusos PC, Pack Seguridad PC, etc.) at www.movistar.es, calling

1004 or through your usual channel.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere ZyXEL Communications Netzwerk-Router Handbücher

ZyXEL Communications

ZyXEL Communications Prestige 650R-31/33 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications Prestige 623 series Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-2302R-P1 Series Referenzhandbuch

ZyXEL Communications

ZyXEL Communications P-663H-51 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-2812HNU-51c Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-2302R-P1C Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications LTE3301-PLUS Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications XS1920 Series Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications VMG8825 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-663H-51 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications PES-100 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications Prestige 941 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P964 APR 964 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P2602IAD Betriebsanleitung

ZyXEL Communications

ZyXEL Communications ZyWALL 10 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications ES-116P Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P8701T Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications GS1100-16 - EDITION 1 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications IES-1000 - ANNEXE 7 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-660R-D Series Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications ES-1024B Referenzhandbuch

ZyXEL Communications

ZyXEL Communications ES-2108 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications NXC2500 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications ZyWALL Series Bedienungsanleitung

Beliebte Netzwerk-Router Handbücher anderer Marken

Allnet

Allnet ALL0333AU Bedienungsanleitung

HomeSeer

HomeSeer HT-SEL Bedienungsanleitung

Sercomm

Sercomm Genesis OC3505D Bedienungsanleitung

Billion

Billion BIPAC 5102 Series Bedienungsanleitung

TP-Link

TP-Link TD-8817 Bedienungsanleitung

Motorola

Motorola MR1900 Bedienungsanleitung

Digi

Digi IX14 Bedienungsanleitung

Cisco

Cisco NCS 540 Handbuch

XAVi

XAVi X8821e Bedienungsanleitung

BEC

BEC 6200WZL Bedienungsanleitung

MikroTik

MikroTik hAP ac3 Series Bedienungsanleitung

Korenix

Korenix JetNet 5428G Series Bedienungsanleitung

NETGEAR

NETGEAR FS526T - Switch Bedienungsanleitung

Automated Logic

Automated Logic ZN551 Betriebsanleitung

Cisco

Cisco ASR 1000 Series Bedienerhandbuch

EnGenius

EnGenius ESR-9710 Bedienungsanleitung

Cisco

Cisco 805 Series Bedienungs- und Sicherheitshinweise

LevelOne

LevelOne FBR-1416 Bedienungsanleitung