A.O. Smith Jaguar Bedienungsanleitung

Size: 210mm (H) x 148mm (W)

Part No.:

Approved on:

User Guide

Instant Water Heater

EWJ 1 & 3 Litres

EWJ 3 Litres

Elite Series Available in 1 - 100 Litre Capacities

EWJ 1 Product Design: REGD/237701

EWJ 3 Product Design: REGD/237702

GLASS COATED

HEATING ELEMENT

RUST PROOF

OUTER BODY

HIGH RATED

PRESSURE

6.5

BAR

3 YEARS WARRANTY ON

HEATING ELEMENT

YEAR

WARRANTY

What's in the box?

Electric

Water Heater

User Guide Wall Mounting

Accessories

Contents

Specifications..............................................................................................1

Key features ................................................................................................2

Installation ..................................................................................................3

Operation instruction.................................................................................5

Troubleshooting..........................................................................................6

Circuit Diagram...........................................................................................6

Warranty Card.............................................................................................7

Jaquar and Company Pvt. Ltd....................................................................13

User Guide

Instant Water Heater

EWJ 1 & 3 Litres

EWJ 3 Litres

Elite Series Available in 1 - 100 Litre Capacities

EWJ 1 Product Design: REGD/237701

EWJ 3 Product Design: REGD/237702

GLASS COATED

HEATING ELEMENT

RUST PROOF

OUTER BODY

HIGH RATED

PRESSURE

6.5

BAR

3 YEARS WARRANTY ON

HEATING ELEMENT

YEAR

WARRANTY

Caution: *Safety valve has been factory fit with the water heater and set at 0.8 MPa

(8 Bar) rated pressure.

Warning: Do not tamper or detach the safety valve from the water heater.

Specifications

Model EWJ 3 EWJ 1

Volume [litres] 3 1

No. of Element One One

Power [kW] 3/4.5 3/4.5

Voltage/Frequency [V/Hz] ~230/50 ~230/50

Temperature range [°C] 25-75 25-75

Working Pressure [Bar] 6.5 6.5

Inlet/Outlet connections [Inch] ½ ½

Tank Warranty [Year] 5 5

Dimensions

Model EWJ 3 EWJ 1

A [mm] 245 215

B1 [mm] 348 306

B2 [mm] 384 346

C [mm] 197 167

Part Descriptors

1 Outlet

2 Inlet

3 Safety Valve

4 Thermostat

5 Thermal - Cutout

6 Front Casing

7 Back Casing

8 Heating Element

9 Inner Container

10 Green Lamp Indicator

11 Red Lamp Indicator

12 Reset Button

EWJ 3 Litre EWJ 1 Litre

Key Features

The container has a high pressure withstanding capacity of 95 psi (6.5 bar

equivalent to 65 metres water head), which makes it suitable for high-rise

buildings.

Superior quality ABS outer body prevents rusting. The elegantly styled water

heater matches kitchen and bathroom décor.

This Instant Water Heater gives you a 3 year warranty on the Glass Coated

Heating Element.

Scale and sediment build-up on the surface of the element can lead to

premature failure. A. O. Smith Glass Coating helps to prevent scale formation

and extends the life of the heating element.

It has a superior Thermostat. In case a fault occurs and the water temperature

exceeds the preset temperature, the Thermal Cutout cuts off the power supply

to assure safety.

The Inner Container is highly dependable, it comes with a 5 year replacement

warranty.

Glass Coated Heating Element

High-rated Pressure

6.5

BAR

Hi-tech Thermostat & Cutout

Rust-proof Outer Body

3 year Warranty on Heating Element

5 year replacement Warranty on Inner Container

YEAR

WARRANTY

YEAR

REPLACEMENT

WARRANTY

Installation

Mounting

1. Make sure that the wall can withstand at least twice the weight of water heater when

completely filled with water.

2. Use a drill bit with diameter of 6mm to drill 3 holes at least 35mm deep in the wall, as

shown in the above diagram.

3. Insert the expansion anchors into the holes, tighten the screws providing sufficient gap for

mounting the water heater.

4. Hang the water heater using the 3 screws on the wall and ensure the water heater is fixed

steadily.

EWJ 3 Litre

54.5 mm

116 mm

EWJ 1 Litre

65mm

173mm

Water heater must be mounted on the wall by fixing 3 nos. of screws (as provided)

Plumbing

1. Make necessary plumbing with reference to the above installation diagram.

2. It is recommended that suitable nylon/SS braided hoses should be used. These hoses

should have a minimum pressure rating of 6.5 Bar and should be compatible for hot water

applications.

3. Connect the cold water pipe to the inlet [blue].

4. Connect the hot water pipe to the outlet [red].

Attention: Make sure a suitable sealing tape is used for all water connections to prevent

leakage. Meanwhile, the hoses should not be tightened excessively over the inlet/outlet

tubes of the product. The hexagonal faces of the inlet outlet tubes must be held firmly by

means of a suitable wrench while fastening the hoses onto them. Failure to do so will

result in damages to the product and voids the guarantee.

Electrical Connections

Filling Water

EWJ 3 Litre EWJ 1 Litre

1. Open a hot water faucet nearby to permit the air to escape.

2. Open the cold water inlet valve fully, filling the heater and the piping.

3. Close the hot water faucet when water flows.

4. Check all the connections to see if there is any leak. In case of a leak, drain the heater

completely, repair the leaking joint and then refill the heater.

 The Power cord is provided with this water heater. Customer should procure a suitable plug

with adequate ratings.

 For a 3kW unit , the power plug should be having a minimum 15 A rating.

 For a 4.5kW unit , the power plug should be having a minimum 20 A rating.

 The Power plug should be BIS certified in view of Product performance and Safety.

Warning:

Connect the water heater using independent sockets, adhering to national standards, to

ensure reliable earthing. Do not use adapters. Use pen multimeter to check whether the

live line and neutral line are not reverse, to ensure complete safety.

Note :

 The RED, BLACK and GREEN wires in the power cord corresponds to Live, Neutral & Earth

connections.

 These should be connected in the Plug accordingly. It is not permitted to leave out or

short the earth wire with Neutral.

 Reliable earthing in the circuit should be ensured by the customer before installation.

 Ensure that the Live, Neutral & Earth Terminals in the plug corresponds to the same in the

socket.

 Use a pen multimeter to check the socket for any reversed Live & neutral lines and take

corrective action by a qualified electrician if required.

Safety Valve

Cold water inlet

Hot water outlet

Safety Valve

Cold water inlet

Hot water outlet

1. Ensure the installation is done as per instructions (refer Mounting, Plumbing & Electrical

Connections section in pages 3 & 4).

2. Ensure the inner container is filled with water (refer Filling Water section in page 4).

3. Plug in the electrical power cord & switch on the electrical supply.

4. Once the water heater is switched on, both the red & green indicators will glow. Red light

indicates the heating & green light indicates the power supply to the water heater.

5. After the water reaches the preset temperature, the red light will switch off indicating that

the heating is completed & water heater is in standby mode. The water heater will be in

standby mode until the hot water is withdrawn from the outlet or the temperature of

the water drops due to passage of time.

6. Open the outlet faucet to get the hot water. Upon withdrawing sufficient amount of hot

water, the water heater will again enter into heating mode. This is indicated by glowing of

red & green lights.

7. After usage, switch off the electrical supply & close the outlet valve.

Caution: Hot water over 50°C will cause scalding. In order to protect you and your family

especially for the safety of children, ensure that the hot water flow & cold water mix is

adjusted in the faucet accordingly before usage. It is advised not to use the outlet from

this water heater directly in a shower or in a faucet. Suitable mixing with cold water is

required before usage.

Operation Instructions

Warning: This water heater should not be operated with insufficient amount of water.

Failure to do so may result in damage to the water heater & injuries to the users. This

will also make the warranty null & void.

Warning: The water heater should be connected to the mains using a power plug

conforming to national standards and suitable current carrying capacity (refer Electrical

Connections in page 4).

Do not switch on the heater, if the water in the inner container is in frozen condition.

Troubleshooting

Problem Possible Cause(s) Solution

• Green and Red No power to heater Turn on electrical switch. Check for

light off blown fuses or tripped breaker

• No hot water Thermal cutout switch open Press Reset button

Control circuit or internal Call Customer Care Centre

wiring error

• Green light on Non-functioning Call Customer Care Centre

Red light off thermostat

• No hot water Control circuit or internal

wiring error

• Water heats slowly Non-functioning element Call Customer Care Centre

• Thermostat does Non-functioning Call Customer Care Centre

not shut off thermostat

Improper calibration Call Customer Care Centre

• Piping connection Connection not sealed Call plumber

leaks

• Leaky cover Tank or parts leak Shut off power immediately and

Call Customer Care Centre

Circuit Diagram

1. Cut-out

2. Indicator Lamp Green

3. Thermostat

4. Indicator Lamp Red

5. Heating Element

Dear Customer,

Congratulations! You have bought a world-class product manufactured by A. O. Smith India Water

Heating Private Limited. It is a wholly owned subsidiary of A. O. Smith Corporation (A. O. Smith).

A. O. Smith is one of the largest water heater manufacturer in the world and a global leader in

innovative technology and energy efficient solutions. Jaquar, the leader in the Indian bath fitting

industry has always emphasised on Quality, Reliability and Service. The key philosophy of Jaquar is

to provide consumers more value for their money. The reason why Jaquar believes in that - Its

products must make Friends not just Customers.

To further its commitment to customer delight, Jaquar offers an exclusive premium range of water

heaters manufactured by A. O. Smith India Water Heating Private Limited.

Our customer-centric approach manifests in many ways. Jaquar has the largest sales and after sales

network with 22 regional centres, over 2200 local dealers complemented by over 225 service

technicians.

If you need any further assistance, please call our Customer Care.

Keep smiling for years to come.

Customer Care No.

1.800.121.6808

J A QUA R CUS T O M ER C A R E ( A )

C O N D IT I ONS O F W A R R A N T Y

• This warranty certificate must be duly filled, stamped and signed by the dealer.

This certificate must be preserved and produced whenever required.

• During the warranty period and under normal use, if the product is found to be of

faulty manufacture, the same will be repaired or replaced upon production of this

warranty certificate, at our option, without charge either for part or labour.

No allowance however, will be mode for labour, transport charges consequential

damages, losses or any other incidental expenses incurred.

• This warranty is not valid for damage resulting from faulty installation,

mishandling, negligence, accidents and unauthorised repairs.

We hereby warrant this product against failure arising through faulty designs,

material or workmanship for a period as mentioned below from the date of purchase

subject to certain conditions specified.

EWJ Instant

• Tank - 5 years

• Heating Element - 3 years

• Rest of the parts - 2 years

Name of Buyer: ..........................................................................................................

Address: ....................................................................................................................

..................................................................................................................................

Ph: ............................. Mobile: ............................... E-mail: ......................................

Date of Purchase: ............................................ Invoice No.: .......................................

Dealer's Name & Address

(Stamp)

..............................................................

.............................................................. ..................................

.............................................................. Signature of the Buyer

Jurisdiction: The courts of competent jurisdiction at Bangalore, Karnataka shall have exclusive

jurisdiction over all matters arising out of any disputes in relation to the product.

Warranty Card

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere A.O. Smith Boiler Handbücher

A.O. Smith

A.O. Smith GPVT 40 Bedienungsanleitung

A.O. Smith

A.O. Smith SGS - 100 Beilage

A.O. Smith

A.O. Smith Vortex HPTU-50 Produktinformationsblatt

A.O. Smith

A.O. Smith DVE-150, DHE-200 Bedienungsanleitung

A.O. Smith

A.O. Smith 185874-001 Bedienungsanleitung

A.O. Smith

A.O. Smith BTXL-100 Bedienungsanleitung

A.O. Smith

A.O. Smith HSE-HAS Bedienungsanleitung

A.O. Smith

A.O. Smith ARGSS02306 Bedienungsanleitung

A.O. Smith

A.O. Smith BTP-600-2500 Anwendungshandbuch

A.O. Smith

A.O. Smith GCV/XCV 65/65L Bedienungsanleitung

A.O. Smith

A.O. Smith 970 Series Bedienungsanleitung

A.O. Smith

A.O. Smith CEWHR-PE6 Bedienungsanleitung

A.O. Smith

A.O. Smith BTH 120-250(A) Handbuch

A.O. Smith

A.O. Smith EES - 120 Bedienungsanleitung

A.O. Smith

A.O. Smith Vertex GPHE-50 Bedienungsanleitung

A.O. Smith

A.O. Smith EWJH 15 Bedienungsanleitung

A.O. Smith

A.O. Smith BTC 201 Bedienungsanleitung

A.O. Smith

A.O. Smith PGX 30, PGX 40, PGX 50, PGXH 30, PGXH 40, PGXH 50, PGR 30, PGR 40, PGR 50, PGXL 30, PGXL... Bedienungsanleitung

A.O. Smith

A.O. Smith Jaguar HSE-SCJ-006 Bedienungsanleitung

A.O. Smith

A.O. Smith CEWHR 35 Bedienungsanleitung

A.O. Smith

A.O. Smith ProMax Direct-Vent GDV-50 Bedienungsanleitung

A.O. Smith

A.O. Smith ZIP Bedienungsanleitung

A.O. Smith

A.O. Smith COF 199 Fehlerbehebungshandbuch

A.O. Smith

A.O. Smith 1000 SERIES 100 Bedienungsanleitung

Beliebte Boiler Handbücher anderer Marken

Kenmore

Kenmore 153.582400 Bedienungsanleitung

STIEBEL ELTRON

STIEBEL ELTRON Eltronom SHU 5 S Bedienungsanleitung

clage

clage E-Mini Series Bedienungsanleitung

Toyotomi

Toyotomi Oil Miser OM-180 Bedienungsanleitung

Bradford White

Bradford White EF Series Bedienungsanleitung

Eccotemp

Eccotemp 40-H Bedienungsanleitung

Dimplex

Dimplex ECSd125-580 Leitfaden

Dux

Dux 32FCR6N Bedienungsanleitung

Noritz

Noritz N-132M Gebrauchsanweisung

TESY

TESY GCV7/4S 10047 Technisches Datenblatt

Toyotomi

Toyotomi Oil Miser OM-148 (Type D) Fehlerbehebungshandbuch

Koryo

Koryo KWHZF15Y Bedienungsanleitung

Pentair

Pentair PSC-14-4-02 Bedienungsanleitung

GE 40M06AAG Montageanleitung

Thermor

Thermor AEROMAX SPLIT 2 Bedienungsanleitung

American Hometec

American Hometec AHQ-B03X Bedienungsanleitung

PVI

PVI MAXIM Bedienungsanleitung

Sunerg Solar Energy

Sunerg Solar Energy Calor Top 200D Betriebsanleitung