ABB SM3000 Bedienungsanleitung
1
noitpircseD.oNtraPytQ
gnidulcni(ylbmessa-buShctiwSenarbmeM
)rooDaideM 2503/0002RG1
gnirpSnoisserpmoCtloBtoviProoDaideM68711B1
wercS4x4M15121B7
pilcriCwercSgnikcaJ02111B1
enarbmeM0003MS–teehSnoitamrofnI
tnemecalpeRylbmessa-buShctiwS 57/30FNI1
rehsaWnialP45021B2
INFORMATION
No. INF03/75 Date: June 2008 Product SM3000 Multipoint Videographic Recorder
Manual IM/SM3000
SM3000
Membrane Switch Sub-Assembly Replacement
1Introduction
This information sheet describes the procedure for replacing the
SM3000 instrument's Membrane Switch sub-assembly, which
is an integral part of the Display Molding.
The Membrane Switch Sub-assembly Pack, GR2000/3710,
includes the following items:
Continued…
Withdraw the instrument
from the case
Remove tamper-proof
seal, if fitted
Unscrew the jacking screw
securing the instrument to
the case
3
1
2
Fig. 3.1 Removing the Instrument from its Case
Information. Refitting is the
reverse of removal.
2Tools Required
•Medium flat-bladed screwdriver
•No.2 Pozidriv screwdriver
•Small-bladed screwdriver or pointed instrument
3Membrane Switch Sub-Assembly Replacement –
Figs. 3.1 and 3.2
Caution. The instrument is vulnerable to
electrostatic damage. Wear an anti-static strap or dismantle
the unit on an anti-static workbench.
1) Isolate the instrument from the power supply.
2) Remove the instrument from its case – see Fig. 3.1.
2
…3 Membrane Switch Sub-Assembly Replacement – Figs. 3.1 to 3.3
3) Stand the instrument on a protective surface to prevent damage to the exterior finish and screen.
4) Remove the chassis from the display molding – see Fig. 3.2.
Fig. 3.2 Removing the Chassis from the Display Molding
Disconnect
membrane switch
flexi-cable from
main board
Pivot bottom of
chassis away from
moulding…
2
Lay instrument face
down on a protective
surface and remove
chassis securing
screws
(one each side)
Disengage lugs
from slots at top
of chassis and lift
chassis clear
of molding
1
…ensuring that
membrane switch
flexi-cable passes
through slot in front
plate
34
Information. Refitting is the reverse of removal.
3
6) Fit the items removed at step 5) to the new display molding
– see Fig. 3.3.
7) Refit the chassis to the display molding – see Fig. 3.2.
8) Refit the instrument to the case – see Fig. 3.1.
9) Restore the power supply to the instrument.
…3 Membrane Switch Sub-Assembly Replacement – Figs. 3.1 to 3.3
5) Disassemble the display molding – see Fig. 3.3
Remove screws
(2 off) securing
lower bracket
and remove
bracket
1Remove screws
(3 off) securing
upper bracket
and remove
bracket
2
Remove jacking
screw circlip…
… nylon spacer…
…and jacking
screw, ensuring
nylon spacer
under head
remains on
jacking screw
3 4
5
Information. Reassembly is the reverse of
disassembly.
Fig. 3.3 Disassembling the Display Molding
Note. When fitting the jacking screw,
ensure one nylon spacer is fitted below the
screw head and another below the circlip.
4
INF03/75 Issue 3
The Company’s policy is one of continuous product
improvement and the right is reserved to modify the
information contained herein without notice.
Printed in UK (06.08)
© ABB 2008
ABB Limited
Howard Road, St. Neots
Cambridgeshire, PE19 8EU
UK
Tel: +44 (0)1480 475 321
Fax: +44 (0)1480 217 948
ABB Inc.
125 E. County Line Road
Warminster, PA 18974
USA
Tel: +1 215-674-6000
Fax: +1 215-674-7183
ABB has Sales & Customer Support expertise in
over 100 countries worldwide
www.abb.com
Andere Handbücher für SM3000
3
Andere ABB Messgerät Handbücher
ABB
ABB CoriolisMaster FCB100 Bedienungsanleitung
ABB
ABB 4630 Bedienungsanleitung
ABB
ABB Relion 670 series Gebrauchsanweisung
ABB
ABB 4690 Series Bedienungsanleitung
ABB
ABB 2117 U-500 Bedienungsanleitung
ABB
ABB Endura AZ20 series Bedienungsanleitung
ABB
ABB EasyLine EL3000 Bedienungsanleitung
ABB
ABB IM300-I Kurzanleitung
ABB
ABB XRC G5 Bedienungsanleitung
ABB
ABB ADS420 Bedienungsanleitung
ABB
ABB AnalyzeIT AX460 Bedienungsanleitung
ABB
ABB AK101 Bedienungsanleitung
ABB
ABB MagMaster Bedienungsanleitung
ABB
ABB Navigator 550 Schulungshandbuch
ABB
ABB JDF300 Bedienungsanleitung
ABB
ABB FEF series Bedienungsanleitung
ABB
ABB CoriolisMaster FCM2000 Bedienungsanleitung
ABB
ABB 10D1476 Bedienungsanleitung
ABB
ABB C1900 Series Bedienungsanleitung
ABB
ABB 4670 Series Bedienungsanleitung
