ABBA CDR30 Bedienungsanleitung

CDR30

www.ABBALightingUSA.com

INSTALLATION GUIDE

IMPORTANT SAFETY INSTRUNCTIONS

LIGHTEN LAMP IS HOT!

WARNING: TO REDUCE THE RISK OF FIRE OR INJURY TO PERSONS:

Lamp gets HOT quickly!

Do not touch HOT lens, guard or enclosure.

Keep lamp away from materials that may burn.

Do not touch the lamp any time. Use soft cloth.

RATED VOLTAGE 12 AC/DC

Thank you for purchasing this quality product. To ensure correct function and

safety, Please read and follow all instructions carefully before assembly,

installation and before using this product.

WARRANTY

This fixture is covered by a 2 year warranty from the date of purchase, not the

date of installation. Please keep the proof of purchase

Warranty will be void if there is any damage due to improper usage or

modification to the fixture.

Failure to comply with the instruction in this manual may increase the risk of

damage or injury and will void warranty.

It is recommended only qualified persons to install this electrical product.

Before attempting to install this unit, ensure all power connections are off for

your own safety.

www.ABBALightingUSA.com

Do not instal within 10 feet of a pool, spa or fountain

CAUTION:

fixture(s) must be installed in accordance with all local codes and ordinances.

INSTALLATION INSTRUCTION

fixture(s) should be used "ONLY" with

low voltage landscape power units

that do not exceed 25A, 15V.

The main cable from power units

should be buried for less than 6 inches

under the ground level.

1. Please ensure the light cable wires

input are 12v ac/dc.

2. Turn off power before installation.

3. Attach the fixture(s) wires to the

main cable connector suitable for

direct burial. Use waterproof wire

nuts. WN12 (Sold separately).

4. Put the spike into the ground. Try to

make firm vertical mounting.

5. Adjust the light angle.

6. Turn on power.

WN12 (Sold separately)

Main Line

Connect the wires using

www.ABBALightingUSA.com

APP CONNECTION AND MODES – LED BULLET FLOOD

FIG.1

2.Turn on the Bluetooth on your Apple or Android device (see Fig. 1)

FIG.2 FIG.3

1. Scan the QR code to download and install on your iOS device (iPhone, iPad) the application HappyLighting from the AppStore. on

your Android device, download HappyLighting from Google Play Store.

3.Turn on the bullet floodlights. Run the application and tap the button on the top left corner to show device list and select the light to

start connection (Fig. 2).

4. You can group 3 to 12 lights using the app (It depends on which version of Android/iOS system you use), by tapping "Group

Manage". Select the lights and add them to the desired group (Fig 3). Multiple groups can be created.

Fig.6 Fig.7

Fig. 4 Fig. 5

7.RGBW Mode - Tap the "Adjust" button to enter RGBW mode. You can adjust both the color RGB (Red/Green/Blue) as well as the

brightness of the color. There are 6 preset and 6 standard color buttons for easy access to the individual channels. (Fig. 6)

8.RGB Scenes - Tap the "Style" button to enter RGB Scene mode. There are 20 preset modes. You can adjust the speed of each

mode using the slider (Fig. 7).

5.Music Mode - Tap the "Music" button to enter Music mode. In this mode the connected bullet floodlight will light in the rhythm of the

music playing on the smartphone or tablet. To do this, select your music library on smartphone or tablet and select the desired music.

With the pause/play button in the middle, you can start or stop the music and the LED light (Fig. 4).

6.Voice Mode - Tap the "Tape" button to enter in Voice mode. In this mode the connected bullet floodlight lights up depending on the

volume / noise from the outside like a microphone (Fig. 5).

Fig.9

Fig.8

10. Remote controller

ON/OFF Button - Switch the unit on or off.

Dimming and Speed - When in static monochrome mode use it to adjusts the brightness; when the set mode is in FADE, STROBE,

FLASH or SMOOTH it adjusts the speed

Static Monochrome - Use the buttons to directly select the desired color (16 choices)

FLASH - Automatic change of colors (fast)

STROBE - Automatic jumping change of colors (slow)

FADE - Automatic change of seven colors with blending effect

SMOOTH - Automatic change of three colors with blending effect

9.Timer - The controller has a build-in timer function. To access it tap the “Timing” button. You can set the desired ON or OFF time or

you can set the light to work in a time interval. The timer will not operate if the power supply is interrupted (Fig. 8).

Inhaltsverzeichnis

Andere ABBA Außenleuchte Handbücher

Beliebte Außenleuchte Handbücher anderer Marken

Sealey

Sealey LED37 Bedienungsanleitung

nordlux

nordlux VEJERS Benutzerhandbuch

SImx

SImx ELITE LED LHTC637 Bedienungsanleitung

GEV

GEV CAROLINE 10833 Bedienungsanleitung

NEBO

NEBO NEB-LSP-0020 Bedienungsanleitung

WE-EF

WE-EF PFL540 LED Bedienungsanleitung

Lindby

Lindby 9949029 Bedienungsanleitung

HEPER

HEPER DOGO Side LW6048.585-US Montage- und Bedienungsanleitung

HEPER

HEPER LW8034.003-US Montage- und Bedienungsanleitung

Maretti

Maretti VIBE S 14.6080.04.A Bedienungsanleitung

BEGA

BEGA 84 253 Handbuch

HEPER

HEPER MINIMO Montage- und Bedienungsanleitung

LIGMAN

LIGMAN BAMBOO 3 Bedienungsanleitung

Maretti

Maretti TUBE CUBE WALL 14.4998.04 Bedienungsanleitung

Maxim Lighting

Maxim Lighting Carriage House VX 40428WGOB Bedienungsanleitung

urban ambiance

urban ambiance UQL1273 Bedienungsanleitung

TotalPond

TotalPond 52238 Bedienungsanleitung

Donner & Blitzen

Donner & Blitzen 0-02661479-2 Bedienungsanleitung