ACME Ellipsoidal Bedienungsanleitung

CONTENTS

1. Safety Instructions ......................................................................................... 2

2. Technical Specifications ................................................................................. 4

3. How To Set The Unit....................................................................................... 7

3.1 Control Panel ........................................................................................... 7

3.2 The Unit Construction .............................................................................. 8

3.3 Installation ............................................................................................... 8

4. Main Function................................................................................................ 9

5. Control By Universal DMX Controller ........................................................... 14

5.1 DMX512 Connection.............................................................................. 14

5.2 Address Setting ...................................................................................... 15

5.3 DMX512 Configuration........................................................................... 16

6. Troubleshooting........................................................................................... 17

7. Fixture Cleaning ........................................................................................... 17

1. Safety Instructions

WARNING

Please keep this User Guide for future consultation. If you sell the unit to another user, be sure that

they also receive this instruction manual.

Important:

Damages caused by the disregard of this user manual are not subject to warranty. The dealer will

not accept liability for any resulting defects or problems.

Unpack and check carefully that there is no transportation damage before using the unit.

This product is for indoor use only. Use only in a dry location.

DO install and operate by qualified operator.

DO NOT allow children to operate the fixture.

Use safety chain when fixing the unit. Handle the unit by carrying its base instead of head only.

The unit must be installed in a location with adequate ventilation, at least 50cm from adjacent

surfaces.

Be sure that no ventilation slots are blocked, otherwise the unit will be overheated.

Before operating, ensure that the voltage and frequency of power supply match the power

requirements of the unit.

It’s important to ground the yellow/green conductor to earth in order to avoid electric shock.

Minimum ambient temperature TA: 0℃. Maximum ambient temperature TA: 40℃.

DO NOT connect the device to any dimmer pack.

Make sure there are no flammable materials close to the unit while operating to avoid fire

hazard.

Examine the power wires carefully; replace them immediately if there is any damage.

Avoid any inflammable liquids, water or metal objects entering the unit. Once it happens, cut

off the mains power immediately.

DO NOT operate in dirty or dusty environment, do clean fixtures regularly.

DO NOT touch any wire during operation as there might be a hazard of electric shock.

Avoid power wires together twist other cables.

Please read the instruction carefully which includes important information about

the installation, usage and maintenance.

Disconnect mains power before fuse replacement or servicing.

Replace fuse only with the same type.

In the event of serious operating problem, stop using the unit immediately.

Never turn on and off the unit time after time.

The housing, the lenses, or the ultraviolet filter must be replaced if they are visibly damaged.

DO NOT open the unit as there are no user serviceable parts inside.

Never try to repair the unit by yourself. Repairs carried out by unskilled people can lead to

damage or malfunction. Please contact the nearest authorized technical assistance center if

needed.

Disconnect the mains power if the fixture is has not been used for a long time.

DO use the original packing materials before transporting it again.

DO NOT look directly at the light while the LED is on.

DO NOT start on the unit without LED enclosure or when housing is damaged.

Installation:

The fixture should be mounted via its Omega Quick Release Clamp bracket. Always ensure that the

unit is firmly fixed to avoid vibration and slipping while operating and make sure that the structure

to which you are attaching the unit is secure and is able to support a weight of 10 times of the

fixtures weight. Always use a safety cable that can hold 12 times of the weight of the fixture when

installing.

The equipment must be installed by professionals. It must be installed in a place where is out of the

reach of people and no one can pass by or under it.

2. Technical Specifications

Power Voltage:

AC 100~240V, 50/60Hz

Power Consumption:

335W

Light Sources:

HD320-B (E-300 MB CW)

HD320-A (E-300 MB WW)

HD320 (E-300 MB NW)

Color Temperature:

5600±200K/3100±150K/4000K±150

Optical:

CRI: WW≥90, CW≥85

CQS: WW≥91, CW≥88

TLCI: WW≥94, CW≥90

Control:

DMX Channel: 1/2D /2 Channels

Protocols: DMX, Primary/Secondary, manual dimmer

Firmware Upgrade via DMX link

Construction:

Display: LCD display

Data In/Out: 3-pin & 5-pin XLR

Power In/Out: Power connector in/out

Protection Rating: IP20

Features:

Lens Options: 5°/11°/14°/19°/26°/36°/50°/70°

Super smooth and uniform flat light

Clear image and sharp edge

Smooth dimmer from 0% to 100%; Strobe effect and gradients effect

High-efficient cooling system to expand LED lifespan

Low noise under 25dB @1m

Dimension/Weight:

5°: 378x1155x524mm, 9.6kgs

14.9"x45.5"x20.6"in, 21.2lbs

11°/14°/19°: 276x872x524mm, 9.6kgs

10.9"x34.3"x20.6"in, 21.2lbs

26°/36°: 276x712x524mm, 9.1kgs

10.9"x28"x20.6"in, 20.1lbs

50°/70°: 276x637x524mm, 9.1kgs

10.9"x25"x20.6"in, 20.1lbs

Photometrics Diagram:

3. How To Set The Unit

3.1 Control Panel

1. DISPLAY: To show the various menus and the selected function

2. LED:

PRIMARY

Primary Mode

SECONDARY

Secondary Mode

DMX

DMX input present

3. Button:

To enter into move backward or leave the menu

To go backward to move up in the menu

DOWN

To go forward to move down in the menu

ENTER

To perform the desired functions

4. DIMMER: Manually adjust the dimmer value

5. MAINS IN: To connect to supply power

6. MAINS OUT: To connect to the next fixture

7. POWER SWITCH: Turns on/off the power

8. FUSE(T 6.3A): Protects the unit from over-voltage or short circuit

9. DMX IN:For DMX512 link, use 3/5-pin XLR cable to link the unit and DMX controller

10. DMX OUT: For DMX512 link, use 3/5-pin XLR cable to link the next units

11. ETHERNET: Transfers fixture’s information to a main controller

3.2 The Unit Construction

3.3 Installation

1 2

Loosen the two screws on the Main Body (MB) and put the Framing System into the MB, then turn

the Framing System right .Tighten the two screws to fix the Framing System.

1. Lens Module

2. Framing System

3. Bracket

4. Main Body

5. Clip for Gel Holder

(Standard/Optional)

6. Gobo Slot

3 4

Put the Lens Module into the Framing System and tighten the Lens Module into the Framing System

with two screws.

4. Main Function

Turn on the unit, press the MENU button into menu mode, and press the UP/DOWN button until

the required function is shown on the monitor. Select the function by the ENTER button. Use the

UP/DOWN button to choose the submenu, press the ENTER button to store and automatically

return to the last menu. Press the MENU button or let the unit idle 30 seconds to exit menu mode.

The main functions are shown below:

Inhaltsverzeichnis

Andere ACME DJ-Equipment Handbücher

ACME

ACME FARANDOLE AM-BAR Bedienungsanleitung

ACME

ACME CP-56U Bedienungsanleitung

ACME

ACME Theatre LED Colour Flood Bedienungsanleitung

ACME

ACME LED-MTX25 IP Bedienungsanleitung

ACME

ACME E-10C WW DXX Bedienungsanleitung

ACME

ACME LED-MB50 Bedienungsanleitung

ACME

ACME LED-BR10 Bedienungsanleitung

ACME

ACME LED-245 II Bedienungsanleitung

ACME

ACME LED-PAR 100 WW/CW Bedienungsanleitung

ACME

ACME LP-TS200 CW Bedienungsanleitung

ACME

ACME ELLIPSOIDAL E-300 Bedienungsanleitung

ACME

ACME Eventx 100 Bedienungsanleitung

ACME

ACME IU-01 Bedienungsanleitung

ACME

ACME CYC-200 FC Bedienungsanleitung

ACME

ACME CW-108 Bedienungsanleitung

ACME

ACME BLINDER LINE 10 IP Bedienungsanleitung

ACME

ACME CP-21TC Bedienungsanleitung

ACME

ACME BP-40 QW S DXX Bedienungsanleitung

ACME

ACME IM-5S-ELC Bedienungsanleitung

ACME

ACME Dotline360 TB-1230 QW Bedienungsanleitung

ACME

ACME SPLENDOR 90 Bedienungsanleitung

ACME

ACME LED-737 Bedienungsanleitung

ACME

ACME LED-MS150 Bedienungsanleitung

ACME

ACME LED-RC8 Bedienungsanleitung

Beliebte DJ-Equipment Handbücher anderer Marken

ALPHA LITE

ALPHA LITE ALPHA 1500 Betriebsanleitung

Chauvet

Chauvet OVATION E-930VW Bedienungsanleitung

Snow Masters

Snow Masters Zig Oscillator Bedienungsanleitung

EuroLite

EuroLite 50530554 Bedienungsanleitung

Beamz

Beamz BUV243 Bedienungsanleitung

thomann

thomann Stairville DJ Lase 40-G MK-III Bedienungsanleitung

Eagletone

Eagletone 6 Eyes Flower Bedienungsanleitung

EuroLite

EuroLite FLD-1508 Bedienungsanleitung

Technical Pro

Technical Pro LG8xSEA Bedienungsanleitung

JB Systems

JB Systems Lounge Laser DMX Bedienungsanleitung

Lightmaxx

Lightmaxx Vega Halo 90 Bedienungsanleitung

Elation

Elation FUZE WASH Z350 Bedienungsanleitung

Maverick

Maverick MK3 WASH Bedienungsanleitung

Infinity

Infinity TF-260C7 Fresnel Bedienungsanleitung

Chauvet

Chauvet EVE E-50Z Bedienungsanleitung

Eliminator Lighting

Eliminator Lighting E 138 Bedienungsanleitung

EuroLite

EuroLite Mini Multicolor LED Flashing Light SC Bedienungsanleitung

KAM

KAM DMX Laser80 FScan Bedienungsanleitung