ACME RAYZOR HYBRID XA-100 BSW Bedienungsanleitung

XA-100 BSW

User Manual

Please read the instruction carefully before use

CONTENTS

1. Safety Instructions..........................................................................................2

2. Technical Specifications..................................................................................4

3. Description.....................................................................................................5

3.1 Control Panel ..........................................................................................5

4. Gobo and Lamp..............................................................................................6

4.1 Gobos .....................................................................................................6

5. How To Set The Unit.......................................................................................7

5.1 Main Function.........................................................................................7

5.2 Home Position Adjustment...................................................................14

5.3 Error Information..................................................................................16

6. Control By Universal DMX Controller ...........................................................17

6.1 Connection ...........................................................................................17

6.2 Address Setting .....................................................................................18

6.3 DMX 512 Configuration ........................................................................18

7. Troubleshooting ...........................................................................................26

8. Cleaning .......................................................................................................27

1. Safety Instructions

WARNING

Please keep this User Guide for future consultation. If you sell the unit to another user, be sure that

they also receive this instruction manual.

Important:

Damages caused by the disregard of this user manual are not subject to warranty. The dealer

will not accept liability for any resulting defects or problems.

Unpack and check carefully that there is no transportation damage before using the unit.

The unit is for indoor use only. Use only in a dry location.

DO install and operate by qualified operator.

DO NOT allow children to operate the fixture.

Use safety chain when fixing the unit. Handle the unit by carrying its base instead of head only.

The unit must be installed in a location with adequate ventilation, at least 50cm from adjacent

surfaces.

Be sure that no ventilation slots are blocked, otherwise the unit will be overheated.

Before operating, ensure that the voltage and frequency of power supply match the power

requirements of the unit.

It’s important to ground the yellow/green conductor to earth in order to avoid electric shock.

Maximum ambient temperature TA: 40℃. DO NOT operate it when the temperature is higher.

DO NOT connect the device to any dimmer pack.

During initial start-up some smoke or smell may arise. This is a normal process and does not

necessarily mean that the device is defective, and it will decrease gradually within 15 minutes.

Make sure there are no flammable materials close to the unit while operating to avoid fire hazard.

Examine the power wires carefully; replace them immediately if there is any damage.

Unit’s surface temperature may reach up to 85℃. DO NOT touch the housing bare-handed during

its operation, and allow about 15 minutes for cooling the unit down before replacing bulb or

maintenance as it could be very hot.

Avoid any inflammable liquids, water or metal objects entering the unit. Once it happens, cut off

Please read the instruction carefully which includes important information about

the installation, usage and maintenance.

the mains power immediately.

DO NOT operate in dirty or dusty environment, do clean fixtures regularly.

DO NOT touch any wire during operation as there might be a hazard of electric shock.

Avoid power wires together twist other cables.

The minimum distance between light output and the illuminated surface must be more than 12

meters.

Disconnect mains power before fuse/lamp replacement or servicing.

Replace fuse/lamp only with the same type.

In the event of serious operating problem, stop using the unit immediately.

Never turn on and off the unit time after time.

The housing, the lenses, or the ultraviolet filter must be replaced if they are visibly damaged.

DO NOT open the unit as there are no user serviceable parts inside.

Never try to repair the unit by yourself. Repairs carried out by unskilled people can lead to damage

or malfunction. Please contact the nearest authorized technical assistance center if needed.

Disconnect the mains power if the fixture is has not been used for a long time.

DO use the original packing materials before transporting it again.

Cautions:

To prevent or reduce the risk of electrical shock or fire, do not expose the unit to rain or moisture.

Hot lamp explosion hazard. DO NOT open the unit within 15 minutes after switching off.

DO replace the bulb once it is damaged, deformed or life-expired.

DO NOT look directly at the light while the bulb is on.

Never touch bulb with bare fingers, as it is very hot after using.

DO NOT start on the unit without bulb enclosure or when housing is damaged.

Installation:

The unit is fully operational in three different mounting positions, hanging upside-down from a ceiling

or set on a flat level surface. To avoid internal damage to the unit, never mount the unit on its side as

illustrated above. Be sure this fixture is kept at least 0.5m away from any flammable materials

(decoration etc.). Always use and install the supplied safety cable as a safety measure to prevent

accidental damage and/or injury in the event the clamp fails.

2. Technical Specifications

Power supply

- AC 100~240V 50/60Hz

Power Consumption

- 189W

Light Source

- 1 X 90W LED

Angle

-Beam Angle: 11°(on full open)

2°/4°/6°/8°/10° (with beam reducer)

3°/6°/9°/12°/15° /20°(with zoom lens)

-Spot Angle: Fix Gobo: 2°15°(with zoom lens)

Rotating Gobo: 10°17°(with zoom lens)

-Wash Angle: 15°28°

Movement

- Pan: 540°

- Tilt: 270°

- Pan/Tilt moving speed adjustable.

- Automatic Pan/Tilt correction.

- Easy calibration and maintenance by magnetic home positioning.

Dimmer/Shutter

- Blackout, 0~100% smooth dimming, independent shutter and various strobe effect.

- Integrated three features: beam, spot and wash

Color wheel

- 8 fixed colors plus white

- Rainbow effect in both directions.

Gobo wheel

- 1 Static gobo wheel with 7 gobos plus open

1 Rotating gobo wheel with 6 gobos plus open

Prism

- Prism : 3 facet prism rotating in both directions

Frost

- Independent frost effect

Focus

- Motorized focus

Zoom

- Motorized linear zoom system

Protocols

- DMX 512

- Date input/output: 3/5 Pin XLR socket

Weight

- 12 Kg

Dimension

- 452× 290×256mm

3. Description

3.1 Control Panel

Front view Rear view

1234567

1.LED:

MASTER On Master mode

SLAVE On Slave mode

SOUND On Sound activation

DMX On DMX input present

2.Display: To show the various menus and the selected function.

3.Button:

290

452

256

MENU To enter into move backward or leave the menu

UP To go backward to move up in the menu

DOWN To go to move down in the menu

ENTER To perform the desired functions

4.DMX input/output: For DMX 512 operation, use 3/5 -pin XLR plug cable to link the units together

5.Power In:Used to connect to supply power.

6.Power out: Used to connect to next unit.

7.Fuse (T 5A): Protect the unit from damage of over current.

4. Gobo and Lamp

4.1 Gobos

CAUTION: Never unscrew the screws of the rotating gobo as the ball bearing will otherwise be

opened!

DANGER!

Install the gobos with the device switched off only.

Unplug from mains before changing gobos!

5. How To Set The Unit

5.1 Main Function

Turn on the unit, press the MENU button into menu mode, and press the UP/DOWN button until the

required function is shown on the monitor. Select the function by the ENTER button. Use the

UP/DOWN button to choose the submenu, press the ENTER button to store and automatically return

to the last menu. Press the MENU button or let the unit idle one minute to exit menu mode.

In the event of disconnecting with mains power, press the UP button for one minute to enter into

menu mode. Press MENU button or let the unit idle one minute to exit.

The main functions are shown below（the grayed boxes are preset settings）:

Fixture Test

DMX Settings

512

MasterSlave

Display Settings

Hold

Yes

mode 1(17)

No/Yes

0~30

English/Chinese

Fixture Settings

mode 2(20)

10m

15m

癈/癋

Blackout

Linear

Square Low

Inv.SQ Law

S Curve

Show Setting

Show1

Show4

Master

Slave1

Slave2

100

Yes

Fixture Information

Reset Functions

Yes

Special Functions

DMX Settings

To select DMX Settings press the ENTER button to confirm, use the UP/DOWN button to select DMX

Address, DMX Channel Mode or DMX State.

DMX Address —DMX512 address setting

To select DMX Address, press the ENTER button to confirm. Use the UP/DOWN button to adjust

the address from 001 to 512, press the ENTER button to store. Press the MENU button back to the

last menu or let the unit idle one minute to exit menu mode.

DMX Channel Mode — channel mode

To select DMX Channel Mode, press the ENTER button to confirm. Use the UP/DOWN button to

select Mode1 (17) or Mode2 (20) channels mode, press the ENTER button to store. Press the

MENU button back to the last menu or let the unit idle one minute to exit menu mode.

DMX State —fixture state while DMX single stops

To select DMX State, press the ENTER button to confirm. Use the UP/DOWN button to select

Master Slave(fixture enters to master slave mode),Blackout (fixture blacks out if DMX signal stops)

or Hold (fixture continues to obey the last command it received Via DMX if DMX signal stops),

press the ENTER button to store. Press the MENU button back to the last menu or let the unit idle

one minute to exit menu mode.

Fixture Settings

To select Fixture Settings, press the ENTER button to confirm, use the UP/DOWN button to select Pan

Inverse, Tile Inverse, P/T Feedback, Dimmer Curve or Show Focus.

Pan Inverse

To select Pan Inverse, press the ENTER button to confirm. Use the UP/DOWN button to select No

(normal) or Yes (pan inverse), press the ENTER button to store. Press the MENU button back to

the last menu or let the unit idle one minute to exit menu mode.

Tilt Inverse

To select Tilt Inverse, press the ENTER button to confirm. Use the UP/DOWN button to select No

(normal) or Yes (tilt inverse), press the ENTER button to store. Press the MENU button back to the

last menu or let the unit idle one minute to exit menu mode.

P/T Feedback

To select P/T Feedback, press the ENTER button to confirm. Use the UP/DOWN button to select

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere ACME DJ-Equipment Handbücher

ACME

ACME CHEETAH LED-GF50 Bedienungsanleitung

ACME

ACME LED-MS150 Bedienungsanleitung

ACME

ACME GLORY PROFILE Bedienungsanleitung

ACME

ACME Junior Series Bedienungsanleitung

ACME

ACME CP-56U Bedienungsanleitung

ACME

ACME Elf Laser Bedienungsanleitung

ACME

ACME Genesis move 25R Bedienungsanleitung

ACME

ACME LED-737 Bedienungsanleitung

ACME

ACME E-10C WW DXX Bedienungsanleitung

ACME

ACME LED-BL8 Bedienungsanleitung

ACME

ACME iColorLed 18TC Bedienungsanleitung

ACME

ACME LED-MTX25 IP Bedienungsanleitung

ACME

ACME LED-7871 Bedienungsanleitung

ACME

ACME ASTRO LED-256D Bedienungsanleitung

ACME

ACME LED-256D RGB Bedienungsanleitung

ACME

ACME O2 Oxygen Bedienungsanleitung

ACME

ACME IM-5S-ELC Bedienungsanleitung

ACME

ACME Ellipsoidal E-300 D2550 Bedienungsanleitung

ACME

ACME LED-ST1000 Bedienungsanleitung

ACME

ACME Dotline360 TB-1230 QW Bedienungsanleitung

ACME

ACME UV-9N Bedienungsanleitung

ACME

ACME Eventx 100 Bedienungsanleitung

ACME

ACME MACE Bedienungsanleitung

ACME

ACME CA-DD12 II Bedienungsanleitung

Beliebte DJ-Equipment Handbücher anderer Marken

ALPHA LITE

ALPHA LITE ALPHA 1500 Betriebsanleitung

Chauvet

Chauvet OVATION E-930VW Bedienungsanleitung

Snow Masters

Snow Masters Zig Oscillator Bedienungsanleitung

EuroLite

EuroLite 50530554 Bedienungsanleitung

Beamz

Beamz BUV243 Bedienungsanleitung

thomann

thomann Stairville DJ Lase 40-G MK-III Bedienungsanleitung

Eagletone

Eagletone 6 Eyes Flower Bedienungsanleitung

EuroLite

EuroLite FLD-1508 Bedienungsanleitung

Technical Pro

Technical Pro LG8xSEA Bedienungsanleitung

JB Systems

JB Systems Lounge Laser DMX Bedienungsanleitung

Lightmaxx

Lightmaxx Vega Halo 90 Bedienungsanleitung

Elation

Elation FUZE WASH Z350 Bedienungsanleitung

Maverick

Maverick MK3 WASH Bedienungsanleitung

Infinity

Infinity TF-260C7 Fresnel Bedienungsanleitung

Chauvet

Chauvet EVE E-50Z Bedienungsanleitung

Eliminator Lighting

Eliminator Lighting E 138 Bedienungsanleitung

EuroLite

EuroLite Mini Multicolor LED Flashing Light SC Bedienungsanleitung

KAM

KAM DMX Laser80 FScan Bedienungsanleitung