ACME LED-BL8 Bedienungsanleitung

15A

Innovation, Quality, Performance

Stage Blinder P8

LED-BL8

User Manual

Please read the instructions carefully

Contents

1. Safety Instructions .........................................................................2

2. Technical Specifications .................................................................4

3. Installation.....................................................................................4

4. How to set the unit.........................................................................5

4.1 Rear Panel.................................................................................5

4.2 Main Function ...........................................................................6

5. How To Control The Unit ................................................................9

6. DMX Channel Mode ...................................................................... 10

7. DMX512 Connections...................................................................12

8. Troubleshooting ..........................................................................12

9. Fixture Cleaning...........................................................................13

14A

Declaration of Conformity

We declare that our products (lighting equipments) comply with

the following specification and bears CE mark in accordance with

the provision of the Electromagnetic Compatibility (EMC) Directive

2004/108/EC.

EN55103-1: 2009 ; EN55103-2: 2009;

EN61000-3-2: 2006 + A1:2009 + A2:2009; EN61000-3-3:

2008.

Harmonized Standard

EN 60598-1:2008 + All:2009; EN 60598-2-17:1989 + A2:1991;

EN 62471:2008; EN 62493: 2010

Safety of household and similar electrical appliances

Part 1: General requirements

13A

1. The stepper motor might be damaged or the cable connected to the PCB is

broken.

2. The motor’s drive IC on the PCB might be out of condition.

9. Fixture Cleaning

The cleaning of internal must be carried out periodically to optimize light output.

Cleaning frequency depends on the environment in which the fixture operates:

damp, smoky or particularly dirty surrounding can cause greater accumulation of

dirt on the fixture’s optics.

Clean with soft cloth using normal glass cleaning fluid.

Always dry the parts carefully.

Clean the external optics at least every 20 days. Clean the internal optics at least

every 30/60 days.

Fresnel lens:

Clean the lens with neutral soap and water, and then dry it with soft cloth. Be

aware that alcohol or other detergent could cause damage to lens. Please note the

lens would be burnt yellow or cracked after three-month use of average 8 hours

per day, which can reduce the output in some degree. The lens is consumable with

a warranty of three months only. Please change with genuinely new lens when

necessary.

1. Safety Instructions

WARNING



Please keep this User Manual for future consultation. If you sell the fixture to

another user, be sure that they also receive this instruction booklet.

Please unpack and check carefully there is no transportation damage before

using the fixture.

Please disconnect main power before servicing and maintenance.

The unit must be installed in a location with adequate ventilation, at least 50cm

from adjacent surfaces. Be sure that no ventilation slots are blocked.

The maximum ambient temperature is Ta: 40℃. DO NOT operate it where the

temperature is higher than this.

DO NOT connect the device to any dimmer pack.

The housing must be replaced if they are visibly damaged.

Unit surface temperature may reach up to 85℃. Don’t touch the housing

bare-hand during its operation. Turn off the power and allow about 15 minutes

for the unit to cool down before replacing or serving.

There are no user serviceable parts inside the fixture. Do not open the housing

or attempt any repairs by yourself. In the unlikely event your fixture may require

Please read the instructions carefully which includes important

information about the installation, operation and maintenance.

service, please contact your nearest dealer.

In the event of serious operating problem, stop using the fixture immediately.

Never try to repair the fixture by yourself. Repairs carried out by unskilled

people can lead to damage or malfunction. Please contact the nearest

authorized technical assistance center. Always use the same type spare parts.

It’s important to ground the yellow/green conductor to earth in order

to avoid electric shock.

DO NOT touch any wire during operation and there might be a hazard of electric

shock.

DO NOT expose the fixture to rain or moisture, in order too prevent

or reduce the risk of electrical shock or fire.

Do not look directly at the LED light beam while the fixture is on.

For AC 220—240V 50Hz power supply, the maximum fixtures that can be

connected on one power cable is 4（including the first fixture）;

For AC 100-120V 60Hz power supply, the maximum fixtures that can be

connected on one power cable are 2 (including the first fixture).

12A

5 pin XLR: Pin 1: GND, Pin 2: Negative signal (-), Pin 3: Positive signal (+),

Pin4/5: not used

8. Troubleshooting

Following are a few common problems that may occur during operation. Here are

some suggestions for easy troubleshooting:

A. The fixture does not work, no light

1. Check the connection of power and main fuse.

2. Measure the mains voltage on the main connector.

B. Not responding to DMX controller

1. DMX LED should be on. If not, check DMX connectors, cables to see if link

properly.

2. If the DMX LED is on and no response to the channel, check the address settings

and DMX polarity.

3. If you have intermittent DMX signal problems, check the pins on connectors or

on PCB of the fixture or the previous one.

4. Try to use another DMX controller.

5. Check if the DMX cables run near or run alongside to high voltage cables that

may cause damage or interference to DMX interface circuit.

C. One of the channels is not working well

11A

1. Connect the fixture together in a “daisy chain” by XLR plug cable from the

output of the fixture to the input of the next fixture. The cable cannot be

branched or split to a “Y” cable. Inadequate or damaged cables, soldered joints

or corroded connectors can easily distort the signal and shut down the system

2. The DMX output and input connectors are pass-through to maintain the DMX

circuit when one of the units’ power is disconnected.

3. At last fixture, the DMX cable has to be terminated with a terminator to reduce

signal errors. Solder a 120-ohm 1/4W resistor between pin 2(DMX-) and pin

3(DMX+) into a 3-pin XLR-plug and plug it in the DMX-output of the last

fixture.

4. Each lighting fixture needs to have an address set to receive the data sent by the

controller. The address number is between 0-511 (usually 0 & 1 are equal to 1).

5. 3 pin XLR connectors are more popular than 5 pins XLR.

3 pin XLR: Pin 1: GND, Pin 2: Negative signal (-), Pin 3: Positive signal (+)

2. Technical Specifications

DMX 1/2/8/9 channels switchable.

Smooth 0~100% dimming and variable strobe speeds.

Two operation modes: DMX, Manual mode.

Ideal for discotheques, clubs, bars, parties, Mobile DJs, etc.

Input Voltage: AC 100V~240V 50/60Hz

Total Power consumption: 800W

Fuse: T10A

LED: 8 x 65W LED

Dimension: 885x 515 x 182 mm

Weight: 16.5Kgs

3. Installation

The unit should be mounted via its screw holes on the bracket. Always ensure

that the unit is firmly fixed to avoid vibration and slipping while operating. Always

ensure that the structure to which you are attaching the unit is secure and is able to

support a weight of 10 times of the unit’s weight. Also always use a safety cable

that can hold 12 times of the weight of the unit when installing the fixture.

The equipment must be fixed by professionals. And it must be fixed at a place

where is out of the touch of people and has no one pass by or under it.

4. How to set the unit

4.1 Rear Panel

○

1 Display: Show the various menus and the selected functions

10A

saved manual address.（D000-D100）。

6. DMX512 Channel Mode

Channel mode:

7. DMX512 Connections

Mode connection：

display will close without any operation for I min. Once selected, press the ENTER

button to setup or exit menu mode without any change after 30 seconds

automatically. Back to the functions without any change press the MENU button

again.

Temperature Display

Select the , press ENTER button and the display will show the temperature of

each unit ……. To go back to the functions press the MENU button.

Firmware version

Select the , press ENTER button and the display will show the version of

software of the unit. To go back to the functions press the MENU button.

5. How To Control The Unit

You can operate the unit in two ways:

1. By manual controller

2. By DMX controller

No need to turn the unit off when you change the DMX address, as new DMX

address setting will be affected at once. Turn on the unit, if there is DMX or without

DMX and manual mode turn off, the LED will display the saved channel address

（001-512）; If there isn’t DMX and manual mode turn on, the LED will display

○

2 LED:

DMX On DMX input present

○

3 Button:

MENU To select the programming functions

DOWN

To go backward in the selected

functions

To go forward in the selected

functions

ENTER To confirm the selected functions

○

4 Mains input/output:

Connect to supply mains power, and Connect to supply mains power for the next

unit.

○

5Fuse: 10 A

○

6DMX input/output:

For DMX512 link, use 3/5-pin XLR plug cable to input DMX signal, and to link the

next unit.

4.2 Main Function

To select any functions, press MENU button until the required one is shown on the

display. Select the function by ENTER button. Use DOWN and UP button to change

the mode. Once the required mode has been selected, press ENTER button to setup

or it will automatically return to the main functions without any change after idling

30 seconds. Back to the functions without any change press MENU button. The

main functions are shown below:

DMX 512 Address

Select the , press the ENTER button and the display will blink. Use the DOWN

and UP button to change the DMX 512 address. Once the address has been selected,

press the ENTER button to setup or exit menu mode without any change after 30

seconds automatically. Back to the previous functions without any change press the

MENU button.

Channel Mode

Select the , press the ENTER button. Use the DOWN and UP button to select

the channel mode (1 /2/8/9). Once selected, press the ENTER button to setup or

exit menu mode without any change after 30 seconds automatically. To go back to

the functions without any change press the MENU button

Manual Mode

Select the , press the ENTER button. Use the DOWN and UP button to select

ON /OFF , after selected, press the ENTER button. If you select the ON,

press the ENTER button, use the DOWN and UP button to select 000-100, and press

the ENTER button to setup or exit menu mode without any change after 30 seconds

automatically. To go back to the functions without any change press the MENU

button

Tungsten Filament Effect

Select the , press the ENTER button. Use the DOWN and UP button to select

(the effect will display when the light turn off or move) or (the effect

won’t display when the light turn off or move). Once selected, press the ENTER

button to setup or exit menu mode without any change after 30 seconds

automatically. Back to the functions without any change press the MENU button

again.

LED display

Select the , press the ENTER button. Use the DOWN and UP button to select

(LED display on) or (LED display off). If you choose OFF, than the LED

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere ACME DJ-Equipment Handbücher

ACME

ACME E-200 MB MC Bedienungsanleitung

ACME

ACME 04XOZONE Bedienungsanleitung

ACME

ACME LED-Exercet Bedienungsanleitung

ACME

ACME LED-BL4B Bedienungsanleitung

ACME

ACME Color Spot Bedienungsanleitung

ACME

ACME THUNDERBOLT Bedienungsanleitung

ACME

ACME Ellipsoidal Bedienungsanleitung

ACME

ACME XP-1200F Bedienungsanleitung

ACME

ACME Theatre LED Colour Flood Bedienungsanleitung

ACME

ACME E-40D TC DXX Bedienungsanleitung

ACME

ACME MP-90 RGBW Bedienungsanleitung

ACME

ACME LED-RC8 Bedienungsanleitung

ACME

ACME PAGEANT 300ZR II Bedienungsanleitung

ACME

ACME FURY LED RGB Bedienungsanleitung

ACME

ACME Festival LED-787 Bedienungsanleitung

ACME

ACME GENESIS COLOR II Bedienungsanleitung

ACME

ACME LED-747-1W Bedienungsanleitung

ACME

ACME Super Dotline Bedienungsanleitung

ACME

ACME Ellipsoidal 10 DMX Bedienungsanleitung

ACME

ACME Color Fusion CF-805 Bedienungsanleitung

ACME

ACME VENOM LED-460 Bedienungsanleitung

ACME

ACME MH-640S-ELC Bedienungsanleitung

ACME

ACME CHEETAH LED-GF50 Bedienungsanleitung

ACME

ACME LED-MTX25 IP Bedienungsanleitung

Beliebte DJ-Equipment Handbücher anderer Marken

ALPHA LITE

ALPHA LITE ALPHA 1500 Betriebsanleitung

Chauvet

Chauvet OVATION E-930VW Bedienungsanleitung

Snow Masters

Snow Masters Zig Oscillator Bedienungsanleitung

EuroLite

EuroLite 50530554 Bedienungsanleitung

Beamz

Beamz BUV243 Bedienungsanleitung

thomann

thomann Stairville DJ Lase 40-G MK-III Bedienungsanleitung

Eagletone

Eagletone 6 Eyes Flower Bedienungsanleitung

EuroLite

EuroLite FLD-1508 Bedienungsanleitung

Technical Pro

Technical Pro LG8xSEA Bedienungsanleitung

JB Systems

JB Systems Lounge Laser DMX Bedienungsanleitung

Lightmaxx

Lightmaxx Vega Halo 90 Bedienungsanleitung

Elation

Elation FUZE WASH Z350 Bedienungsanleitung

Maverick

Maverick MK3 WASH Bedienungsanleitung

Infinity

Infinity TF-260C7 Fresnel Bedienungsanleitung

Chauvet

Chauvet EVE E-50Z Bedienungsanleitung

Eliminator Lighting

Eliminator Lighting E 138 Bedienungsanleitung

EuroLite

EuroLite Mini Multicolor LED Flashing Light SC Bedienungsanleitung

KAM

KAM DMX Laser80 FScan Bedienungsanleitung