ACME XP-280 BS Bedienungsanleitung

XP-280 BS

User Manual

Please read the instruction carefully before use

CONTENTS

1. Safety Instruction ...........................................................................................2

3. Technical Specification ...................................................................................4

4. Fixture Description.........................................................................................6

4.1 Control Panel............................................................................................6

5. Gobo Wheel and Lamp...................................................................................6

5.1 Gobo Wheel .............................................................................................7

5.2 Lamp ........................................................................................................7

5.3 Change The Lamp.....................................................................................8

6. How to set the fixture ....................................................................................9

6.1 Main Function ..........................................................................................9

6.2 Home Position Adjustment.....................................................................13

7. Control By Universal DMX Controller ...........................................................17

7.1 DMX Connections...................................................................................17

7.2 Channel Mode Setting............................................................................18

7.3 DMX Address Setting..............................................................................19

7.4 DMX Control...........................................................................................19

8. Troubleshooting ...........................................................................................27

9. Check and Cleaning ......................................................................................29

A 1C

1. Safety Instruction

WARNING

Please keep this User Manual for future consultation. If you sell the unit to another user, be sure

that they also receive this instruction manual.

Important:

Damages caused by the disregard of this user manual are not subject to warranty. The

dealer will not accept liability for any resulting defects or problems.

Unpack and check carefully that there is no transportation damage before using the unit.

The unit is for indoor use only. Use only in a dry location.

Do install and operate by qualified operator.

Do not allow children to operate the fixture.

Use safety chain when fixing the unit. Handle the unit by carrying its base instead of head only.

The unit must be installed in a location with adequate ventilation, at least 50cm from adjacent

surfaces.

Be sure that no ventilation slots are blocked; otherwise the unit will be overheated.

Before operating, ensure that the voltage and frequency of power supply matches the power

requirements of the unit.

It’s important to ground the yellow/green conductor to earth in order to avoid electric shock.

Maximum ambient temperature TA: 40℃. Don’t operate it when the temperature is higher.

Don’t connect the device to any dimmer pack.

During initial start-up some smoke or smell may arise. This is a normal process and does not

necessarily mean that the device is defective, and it will decrease gradually within 15 minutes.

Make sure there are no flammable materials close to the unit while operating to avoid fire

hazard.

Examine the power wires carefully; replace them immediately if there is any damage.

Unit’s surface temperature may reach up to 85℃. Don’t touch the housing bare-handed

during its operation, and allow about 15 minutes for cooling the unit down before replacing

bulb or maintenance as it could be very hot.

Please read the instruction manual carefully which includes important

information about the installation, usage and maintenance.

A 2C

Avoid any inflammable liquids, water or metal objects entering the unit. Once it happens, cut

off the mains power immediately.

Do not operate in dirty or dusty environment; do clean the fixture regularly.

Do not touch any wire during operation as there might be a hazard of electric shock.

Avoid power wires twist other cables.

The minimum distance between light output and the illuminated surface must be more than

12 meters.

Disconnect mains power before fuse/lamp replacement or servicing.

Replace fuse/lamp only with the same type.

In the event of serious operating problem, stop using the unit immediately.

Never turn on and off the unit time after time.

The housing, the lenses, or the ultraviolet filter must be replaced if they are visibly damaged.

Do not open the unit as there are no user serviceable parts inside.

Never try to repair the unit by yourself. Repairs carried out by unskilled people can lead to

damage or malfunction. Please contact the nearest authorized technical assistance center if

needed.

Disconnect the mains power if the fixture is has not been used for a long time.

Do use the original packing materials before transporting it once again.

To prevent or reduce the risk of electrical shock or fire, do not expose the unit to rain or

moisture.

Hot lamp explosion hazard. Do not open the unit within 15 minutes after switching off.

Do replace the bulb once it is damaged, deformed or life-expired.

Do not look directly at the light while the bulb is on.

Never touch bulb with bare fingers, as it is very hot after using.

Do not start on the unit without bulb enclosure or when housing is damaged.

Installation:

1. Bolt each clamp (1) to the Omega holder with screw and lock nut through the hole in the

holder.

2. Fasten the omega holders (2) on the bottom of the base by inserting quick-lock fasteners (3)

A 3C

into the holes of the base and tighten fully clockwise.

3. Hang the fixture to the support (4) through clamp and fasten the screws (5). Fasten the safety

cable (6) through the bottom of the base and over the support.

Attention:

Always ensure that the structure to which you are attaching the unit is secure and is able to

support a weight of 10 times of the unit’s weight without any harming deformation.

Also always use a safety cable that can hold 12 times of the weight of the unit when installing

the fixture.

Make absolute sure that the unit is firmly fixed in way that no vibrating or slipping would occur

during operation.

The equipment must be installed beyond the areas where persons may walk by or be seated.

The rigging has to be operated by or under the guide of a skilled person.

3. Technical Specification

Power Supply

：

100~240V，50/60Hz

Power Consumption

：

410W

Lamp

：

MSD280 R10

Optical system

High efficient Optical system

A 4C

Delivering extremely powerful output

High quality lens

Movement

Pan: 540°

Tilt: 270°

Pan/Tilt moving speed adjustable.

Automatic Pan/Tilt correction

Easy calibration and maintenance by Pan/Tilt magnetic home positioning

Dimmer/Shutter:

Mechanical dimmer

Mechanical shutter and adjustable speed strobe effect

Color wheel:

Color wheel: 13 fixed colors

Rainbow effect in both directions

Easy calibration and maintenance by magnetic home positioning

Gobo wheel:

Gobo Wheel: 9 fixed gobos

Easy calibration and maintenance by magnetic home positioning

Protocols:

DMX 512

Data input/output: 3 Pin XLR socket

Dimension

：

574×365×256mm

Weight

：

17kg

Cooling

：

Fan Cooling

574

365

337

256

A 5C

4. Fixture Description

4.1 Control Panel

1. LED:

POWER

Power On

DMX

DMX input present

2. BUTTON:

To select the programming functions

To go forward in the selected functions

DOWN

To go backward in the selected functions

ENTER

To confirm the selected functions

3. FUNCTION DISPLAY: Used to show the various menus and the selected function;

4. DMX IN: DMX 512 link, use 3-pin XLR cable to link the unit and DMX controller;

5. DMX OUT: DMX 512 operation, use 3-pin XLR cable to link the next units;

6. POWER SWITCH: Turns On/Off the power;

7. POWER:Connect to the mains supply;

8. FUSE (T10A): Protect the unit from damage of over voltage or short circuit.

A 6C

5. Gobo Wheel and Lamp

5.1 Gobo Wheel

DANGER!

Install/change the gobo-wheel with the device switched off only

5.2 Lamp

MSD280 R10

Because of its high internal pressure, there might be a risk that the Discharge

lamp would explode during operation. The lamp emits intense UV radiation which is

harmful to the eyes and skin. The high luminance of the arc can cause severe damage to

the retina if you take a close look at the lamp.

To protect the lamp, always turn off the lamp first (via control panel or DMX controller)

and let the unit run at least five minutes to cool down before switching off the mains

supply. Never handle the lamp or luminary when it is hot.

Do not touch the bulb with bare hands. If this happens, clean the lamp with denatured

alcohol and wipe it with a lint free cloth before installation.

The lamp generates UV radiation. Never operate the lamp without appropriate shielding.

A 7C

When lighting up, the lamp operates at high pressure and there is a slight risk of arc tube

rupture. The risk increases with age, temperature and improper handling of the lamp. Do

not use the lamp longer than its lifespan.

Make sure the lamp is located in the center of the reflector for the best projection

5.3 Change The Lamp

Do not use this lamp more than 3000 hours, Using the lamp any longer than its set life could

seriously damage your unit. Periodically checking the lamp running time, when the lamp reaches

the 3000 hour mark, or close to it, we strongly suggest you switch the lamp out. Clear the RESET

TIME after you have replaced the lamp.

1. Remove the fixture head covers using a screwdriver (Figure 1).

Figure 1

2. Lift the lamp out of its recess, disconnect the lamp and connect a new lamp that must be the

same type with the old one. And then place the new lamp into the lamp recess.

A 8C

Figure 2

3. Finally Place the new lamp into the lamp recess reinstall the head cover, fastening it securely

before reapplying power.

Figure 3

6. How to set the fixture

6.1 Main Function

To select any of the given functions, press the MENU button up to when the required one is

showing on the display. Select the function by the ENTER button and the display will blink. Use the

DOWN and UP button to change the mode. Once the required mode has been selected, press the

ENTER button to setup, to go back to the functions without any change press the MENU button

A 9C

Andere Handbücher für XP-280 BS

Inhaltsverzeichnis

Andere ACME Beleuchtungsausrüstung Handbücher

ACME

ACME Oxygen Bedienungsanleitung

ACME

ACME LED-275 D Bedienungsanleitung

ACME

ACME DOT Bedienungsanleitung

ACME

ACME Dynamic 25 Roller LED-SC25B Bedienungsanleitung

ACME

ACME Sunrise Bedienungsanleitung

ACME

ACME Spider FC Bedienungsanleitung

ACME

ACME Building wash Bedienungsanleitung

ACME

ACME DIABOLO 500 Bedienungsanleitung

ACME

ACME DELUGE LED-WAV-50W Bedienungsanleitung

ACME

ACME Colortec 250 Bedienungsanleitung

ACME

ACME ICARUS 620 Bedienungsanleitung

ACME

ACME Glamour 350Z Bedienungsanleitung

ACME

ACME GEIST BSWF Bedienungsanleitung

ACME

ACME LED-PS10D RGBW Bedienungsanleitung

ACME

ACME Sandane Bedienungsanleitung

ACME

ACME LED-MS600 PE Bedienungsanleitung

ACME

ACME Energy Spot PRO Bedienungsanleitung

ACME

ACME IP Cabin AR-01 Bedienungsanleitung

ACME

ACME HYGIEA Bedienungsanleitung

ACME

ACME Stage Par 220MP-220 Bedienungsanleitung

ACME

ACME Spartan Hybrid C Bedienungsanleitung

ACME

ACME Theatre Spot 150m Bedienungsanleitung

ACME

ACME Xperior XP-380 BEAM IP F Bedienungsanleitung

ACME

ACME LED-MTX6S-8W Bedienungsanleitung

Beliebte Beleuchtungsausrüstung Handbücher anderer Marken

Brizo

Brizo 8SP-MU-4 Bedienungsanleitung

LUCE&LIGHT

LUCE&LIGHT BROM 1.0 Bedienungsanleitung

IKEA

IKEA BJÖRKSPIREA Bedienungsanleitung

Laserworld

Laserworld Evolution Series ES-400RGB Bedienungsanleitung

Alien

Alien RG STAR Bedienungsanleitung

EuroLite

EuroLite LED B-40 Bedienungsanleitung

Qazqa

Qazqa Suplux SL 3 Black 103062 Bedienungsanleitung

Commercial Electric

Commercial Electric 54568141 Bedienungsanleitung

CREE LIGHTING

CREE LIGHTING 304 Series Bedienungsanleitung

Goobay

Goobay 49867 Bedienungsanleitung

ECOMAN ITALIA

ECOMAN ITALIA LED T8 Bedienungsanleitung

Alkalite

Alkalite Krypton KT-81 Bedienungsanleitung

Clas Ohlson

Clas Ohlson GU10 Bedienungsanleitung

DTS

DTS DELTA 10 F Bedienungsanleitung

ring

ring Solar Steplight Bedienungsanleitung

One Stop Gardens

One Stop Gardens 57696 Montageanleitung

Chauvet DJ

Chauvet DJ COREpar UV120 ILS Bedienungsanleitung

SIREM

SIREM Swimeo A2 Bedienungsanleitung