ACTi INR-406 Bedienungsanleitung
Quick Installation Guide
INR-406
128-Channel 8-Bay Rackmount Standalone NVR
INR-407
256-Channel 8-Bay Rackmount Standalone NVR
2 Standalone NVR Quick Installation Guide
Thank you for purchasing ACTi Standalone Network Video Recorder. This guide
contains all the information you need to quickly set up ACTi INR server system
via local interface.
For detailed instructions on installation, operation and how to log in to INR as
a web client, please refer to the product manuals provided on ACTi corporate
website.
The items below are prerequisite for installation:
• Network cameras
• Network cables
• Network switch
• Monitor (with HDMI, DVI or Display Port cable)
• USB mouse
• AtleastoneACTi-certied3.5-inchSATAharddisk
Findthecertieddiskmodelsathttp://www.acti.com/hddselector
BEFORE YOU START
Standalone NVR Quick Installation Guide 3
HARDWARE INSTALLATION
AT A GLANCE
This package contains:
• INR
• Rail Kit
• Power Cord
• Universal Converter
UNPACK
• Disk Screws Pack
• Warranty Card
Front Panel
Rear Panel
Disk Bays x 8 USB Ports x 2 System LED
Reset Button
LFE/Surround/SPDIF Output
DVI Port
AC Power Connector
USBPorts3.0x2
Display Port
USB Ports x 2
USBPorts3.0x2
LAN1 Port
LAN2 Port
Line IN
Power Button
HDMI Port Mic IN
Line OUT
4 Standalone NVR Quick Installation Guide
RACKMOUNT THE UNIT
This unit is designed to be mounted on a standard server rack, which
occupies2U(3.5″)ofverticalspace.
INR Sliding Rail Kit
HARD DISK INSTALLATION
REMOVE THE TRAY
Step 1
Slide the lock tab aside,
and the hinge tab will
pop out by itself.
Step 2
Hold the tab lever and
pull out the tray.
INSTALL THE TRAY
Step 4
Place your thumb on
the lock to push the
tray into position in the
chassis.
Step 5
Press the hinge tab
until it clicks into place.
MOUNT THE DISK
Step 3
Loosen the two
screws on the tray to
remove the dummy
disk. Secure the hard
disk on the tray with
the provided disk
screws. Make sure the
disk connector faces
towards the SATA
contacts inside the unit.
Make sure this unit is turned off, and insert the hard disks into the disk bays
following the sequence of tray numbers.
1. Allowaminimumof5cmclearanceatthe
frontandtherearforfront-to-backairowof
the unit.
2. Use the bundled rail kit, and install that to
support the entire unit.
3.Secure the unit onto the rack.
Standalone NVR Quick Installation Guide 5
START-UP
1. On the front panel, press the Power Button to turn on the unit.
2. On the Windows login screen, follow the on-screen instructions to setup
your login password. This will be used in succeeding Windows login. It is
strongly recommended not to leave the password blank.
CONNECT THE DEVICES
The example below displays a network consisting of only INR, network cameras
and required peripherals. Please remember to enable the DHCP service on your
router for INR to obtain an IP address automatically.
Note
To assign a static IP address to INR, enter Windows
andcongurethenetworksettingsinNetwork
and Sharing Center.
Power Source
USB Devices
Monitor
Switch
Cameras
6 Standalone NVR Quick Installation Guide
CREATE HARDWARE RAID (OPTIONAL)
AsthisunitsupportshardwareRAIDconguration,youcanmakediskarrays
using the bundled software utility.
1. On Windows Desktop, double-click on the shortcut to initialize the
RAID management utility.
2. On Remote servers list, select the IP address of this server and click on
“Login“. On the login window, input the credentials and click “Login“.
3.On the Dashboard page, click on “Create virtual drive” .
User Name: ACTi
Password: 123456
Standalone NVR Quick Installation Guide 7
4. Choose “Simple“ mode and then click on “Next“.
5. Select the RAID level, number of Virtual drives (arrays) and the Capacity
of the array, and then click on “Next”.
6.Onconrmationwindow,clickon“Finish“.
8 Standalone NVR Quick Installation Guide
CREATE DISK VOLUMES
Use Windows Disk Management to create disk volumes so that INR can
access the available storage space.
1. On Windows Search Box, search and enter “computer management”.
SOFTWARE CONFIGURATION
2. Select “Disk Management”, right-click on a disk title and select “Initialize
Disk”, choose “GPT” as the partition style and click on“OK”.
3.Right-click on the initialized disk and select the volume type to make a
new volume.
Standalone NVR Quick Installation Guide 9
4. Follow the on-screen Wizard to complete. Make sure you assign the
desired drive letter and give a proper label name to this volume.
Note
TomakeaStripedvolume,aMirroredvolumeoraRAID-5volume,itisrecommendedthat
you select disks of the same model and capacity.
Note
For detailed instructions on choosing the RAID types and troubleshooting hard disk issues,
please refer to System Administrator’s manual provided on ACTi Download Center at
http://www.acti.com/downloadcenter
5.After the volume is created, it is shown on Volume List and is ready for
recording.
10 Standalone NVR Quick Installation Guide
SET ADMIN PASSWORD
Forrst-timeuse,makesuretosetup
the administrator password.
1. On Windows Search Box, search and
enter “administrator tool”.
2. Click NVR3 Administrator Tool to
open the application.
LOG IN
On Windows Destop, double-click on
to enter NVR interface.
Type the Account and Password, and click
Login.
3.On the tool interface, go
to the Account page, then
click the Password Setup
button.
4. Type the preferred
password, and then click
Apply.
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Andere ACTi DVR Handbücher
ACTi
ACTi ENR Series Bedienungsanleitung
ACTi
ACTi INR-411 Bedienungsanleitung
ACTi
ACTi ENR-620P Bedienungsanleitung
ACTi
ACTi ENR-220P Bedienungsanleitung
ACTi
ACTi XNR-4200 Bedienungsanleitung
ACTi
ACTi ENR-030-V5.03.01.01-AC Anleitung zur Verwendung
ACTi
ACTi NVR 3.0 Gebrauchsanweisung
ACTi
ACTi ENR-420 Bedienungsanleitung
ACTi
ACTi ENR-190 Bedienungsanleitung
ACTi
ACTi ENR-110 Gebrauchs- und Pflegehandbuch
ACTi
ACTi INR-350 Bedienungsanleitung
ACTi
ACTi INR-100 Bedienungsanleitung
ACTi
ACTi GNR-340 Bedienungsanleitung
ACTi
ACTi ACD-2400 Bedienungsanleitung
ACTi
ACTi ZNR Bedienungsanleitung
ACTi
ACTi ZNR Series Bedienungsanleitung
ACTi
ACTi INR-340 Bedienungsanleitung
ACTi
ACTi GNR-350 Bedienungsanleitung
ACTi
ACTi INR-410 Bedienungsanleitung
ACTi
ACTi GNR-3000 Benutzerhandbuch
