Advantech PCI-1714UL Installations- und Betriebshandbuch

1 Startup Manual

STARTUP MANUAL

PCI-1714U/UL

Simultaneous 4-ch Analog Input Card

Before installation, please make sure that you have

received the following:

• PCI-1714U, PCI-1714UL DA&C card

• Driver CD

• Quick Start User Manual

If anything is missing or damaged, contact your dis-

tributor or sales representative immediately.

For more detailed information on this product,

please refer to the PCI-1714U User Manual on the

CD-ROM (PDF format).

FCC Class A

This equipment has been tested and found to comply with

the limits for a Class A digital device, pursuant to part 15 of

the FCC Rules. These limits are designed to provide reason-

able protection against harmful interference when the

equipment is operated in a commercial environment. This

equipment generates, uses, and can radiate radio frequency

energy and, if not installed and used in accordance with the

instruction manual, may cause harmful interference to radio

communications. Operation of this equipment in a residen-

tial area is likely to cause interference in which case the

user is required to correct interference at his own expense.

This product has passed the CE test for environmental spec-

ifications when shielded cables are used for external wiring.

We recommend the use of shielded cables. This kind of

cable is available from Advantech. Please contact your local

supplier for ordering information.

The PCI-1714U and PCI-1714UL are simultaneous 4-chan-

nel analog input cards with high sampling rates. They are

advanced-performance data acquisition cards based on 32-

bit PCI bus architecture. The maximum sampling rate of

PCI-1714U is up to 30 MS/s, and 10 MS/s for PCI-1714UL.

Analog Input

PCI-1714U: 30 MHz is only for FIFO depth of 32K.

PCI-1714UL: 10 MHz is only for FIFO depth of 8K.

Packing List Specifications

User Manual

Declaration of Conformity

Overview

Notes

For more information on this and other Advantech

products, please visit our websites at:

http://www.advantech.com/eAutomation

For technical support and service:

http://www.advantech.com/support/

This startup manual is for PCI-1714U/1714UL.

Part No. 2003171411 2nd Edition

Feburary 2011

Channels 4 single-ended analog input channels

Resolution 12-bit

FIFO Size PCI-1714U: 32K

PCI-1714UL: 8K

Max. Sampling

Rate

30MHz For PCI-1714U

10MHz For PCI-1714UL

Input range and

Gain List

Gain 1 2 5 10

Range ±5V ±2.5V ±1V ±0.5V

Drift Gain 1 2 5 10

Zero (V / °C) ±200 ±100 ±40 ±20

Gain

(ppm / °C)

±30 ±30 ±30 ±30

Small Signal Band-

width for PGA

Gain 1 2 5 10

Bandwidth

(-3dB)

7MHz 7MHz 7MHz 7MHz

Max. Input Voltage ±15V

Input Surge Protec-

tion

30 Vp-p

Input

Impedance

50/1M/Hi Z jumper selectable /100pF

Trigger Mode Software, pacer, post-trigger, pre-trigger,

delay-trigger, about-trigger

Accuracy DC DNLE ±1LSB (No Missing

Codes:12 Bits

Guaranteed)

INLE ±2LSB

Offset

error

Adjustable to

±1LSB

Gain

error

Adjustable to

±1LSB

AC SINAD

S/ (N+D)

66 dB (Hi Z)

ENOB 10.67 bits (Hi Z)

THD -73 dB (Hi Z)

External Clock 1 Logic level TTL (Low: 0.8 V max. High:

2.0V min.)

Input

impedance

50 ohms

Input

Coupled

Frequency Up to 10MHz

External Clock 0 Logic level 5.0V peak to peak sin wave

Input

impedance

Hi Z

Input cou-

pled

Frequency Up to 10MHz

External Trigger 0

Logic level TTL (Low: 0.8 V max. High:

2.0V min.)

Input

impedance

Hi Z

Input

Coupled

External Analog

Trigger Input

Range By analog input range

Resolution 8-bit

Frequency Up to 1MHz

2 Startup Manual

General

• I/O Connector Type: 4 BNC connector for AI

1 PS2 connector for ext. clock and trigger

• Dimensions: 137 x 107 mm (5.4" x 4.2")

• Power Consumption:

Typical +5 V @ 850 mA ; +12 V @ 600 mA

Max. +5 V @ 1 A ; +12 V @ 700mA

• Operating Temperature: 0~70° C (32~158° F)

• Storage Temperature: -20 ~ 85° C (-4 ~ 185° F)

• Relative Humidity: 5~95% RH, non-condensing

(refer to IEC 68-2-3)

• Certifications: CE certified

Software Installation

Hardware Installation

1. Turn off your computer and unplug the power cord

and cables. TURN OFF your computer before

installing or removing any components.

2. Remove the cover of your computer.

3. Remove the slot cover on the back panel of your

computer.

4. Touch the metal part on the surface of your computer

to neutralize the static electricity that might be on

your body.

5. Insert the PCI-1714U card into a PCI slot. Hold the

card only by its edges and carefully align it with the

slot. Insert the card firmly into place. Use of exces-

sive force must be avoided; otherwise, the card

might be damaged.

6. Fasten the bracket of the PCI-1714U card on the back

panel rail of the computer with screws.

7. Connect appropriate accessories (such as source/sync

signal cables, wiring terminals, etc. if necessary) to

the card.

8. Replace the cover of your computer chassis. Re-con-

nect the cables you removed in step 1.

9. Plug in the power cord and turn on the computer.

Specifications Installation

Startup Manual 3

PCI-1714U/1714UL cards have one function switch

and five jumper settings.

Figure 1: Card Connector, Jumper and

Switch Locations

BoardID Switch Settings (SW1)

BoardID settings are used to set a board’s unique identi-

fier when multiple identical cards are installed in the

same system. PCI-1714U/1714UL cards have a built-in

DIP switch (SW1), which is used to define each card’s

unique identifier. You can determine the unique identi-

fier in the register as shown in following table. If there

are multiple identical cards in the same chassis, the

BoardID switch helps differentiate the boards by identi-

fying each card’s device number with the switch set-

ting. The BoardID switch’s unique identifier has been

set to 0 at the factory. If you need to adjust it to other

numbers, set SW1 by referring to DIP switch settings

below.

Note: On: 1, off: 0

Power on Configuration after Hot Reset (JP1)

Use JP1 to set the hot reset type of PCI-1714/1714U.

Input Terminator Select (JP2 to JP5)

Use JP2 to JP5 to set the input terminator values for

each AI channel (CH0 to CH3).

Switch & Jumper Settings

ID3 ID2 ID1 ID0 Board ID

111 1 0

111 0 1

110 1 2

110 0 3

101 1 4

101 0 5

100 1 6

100 0 7

011 1 8

011 0 9

010 1 10

010 0 11

001 1 12

001 0 13

000 1 14

000 0 15

Pin Assignments

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Advantech PCI-Karte Handbücher

Advantech

Advantech PCA-6008VG Bedienungsanleitung

Advantech

Advantech RIO-3302 Bedienungsanleitung

Advantech

Advantech PCI-1721 Bedienungsanleitung

Advantech

Advantech PCA-6005-B Bedienungsanleitung

Advantech

Advantech PCI-1757UP Bedienungsanleitung

Advantech

Advantech PCI-1751U Bedienungsanleitung

Advantech

Advantech ECU-P1761 Installations- und Betriebshandbuch

Advantech

Advantech PCI-1602UP Bedienungsanleitung

Advantech

Advantech PCIE-1760 Bedienungsanleitung

Advantech

Advantech PCIE-1174 Bedienungsanleitung

Advantech

Advantech PCM-3641I Installations- und Betriebshandbuch

Advantech

Advantech PCI-1710 Bedienungsanleitung

Advantech

Advantech PCI-1713 Bedienungsanleitung

Advantech

Advantech PCI-1736UP Bedienungsanleitung

Advantech

Advantech MIC-3950 Bedienungsanleitung

Advantech

Advantech PCI-1713U Bedienungsanleitung

Advantech

Advantech PCI-1761 Bedienungsanleitung

Advantech

Advantech PCI-1715U Bedienungsanleitung

Advantech

Advantech PCI-1612B Betriebsanleitung

Advantech

Advantech PCI-1750 Bedienungsanleitung

Advantech

Advantech PCI-1723 Bedienungsanleitung

Advantech

Advantech PCI-1755 Bedienungsanleitung

Advantech

Advantech PCL-730 Bedienungsanleitung

Advantech

Advantech DVP-7020BE Bedienungsanleitung

Beliebte PCI-Karte Handbücher anderer Marken

ERMA

ERMA SSI 1417 Bedienungsanleitung

SIIG

SIIG CyberSerial Dual PCI Montageanleitung

Moxa Technologies

Moxa Technologies CP-102E Bedienungsanleitung

I-Bus

I-Bus IBC2602 Bedienungsanleitung

Exsys

Exsys EX-60102 Bedienungsanleitung

Chelsio Communications

Chelsio Communications T5 Series Bedienungsanleitung

Conrad Electronic

Conrad Electronic 97 46 71 Bedienungsanleitung

Micro Innovations

Micro Innovations USB650A Bedienungsanleitung

KTI Networks

KTI Networks KF-310 Bedienungsanleitung

Asus

Asus SpaceLink WL230 Bedienungsanleitung

SIIG

SIIG SC2475 Bedienungsanleitung

TRENDnet

TRENDnet TEW-703PI Bedienungsanleitung

Belkin

Belkin F5D7000F Bedienungsanleitung

Pericom

Pericom PI7C7100 Bedienungsanleitung

ADLINK Technology

ADLINK Technology cPCI-3548 Bedienungsanleitung

Digium

Digium TE200 Series Bedienungsanleitung

Allo.com

Allo.com 2nd Gen E1/T1/J1 Bedienungsanleitung

Western Digital

Western Digital FireWire PCI Adapter Bedienungsanleitung