Agilent Technologies 490 Micro GC Bedienungsanleitung

Agilent Technologies

Agilent 490 Micro GC

Manual Injection Port Field Kit

Installation Instructions

This document describes the installation of the field kits for the manual

injection ports (septum nut and luerlock) at the front of the Agilent 490

Micro GC.

NOTE

When the Agilent 490 Micro GC is equipped with a standard unheated front inlet, an

additional field upgrade kit for the sample inlet box is required. The part number for a dual

cabinet Agilent Micro GC is CP490202, for the quad cabinet Agilent Micro GC use part

number CP190203.

2Installation Instructions

Agilent 490 Micro GC

Table 1 Parts list for the four kit types

Kit types available



Description and Part number

CP490204

Septum

CP490205

Luerlock

CP490206

Septum + Rear

CP490207

Luerlock + Rear

Bracket with pressure relief valve

CP742849/CP742987

Bracket with pressure relief valve + ball-valve

CP742849/CP742987/CP958942

Sample in bracket

CP739952

XX X X

Torx screw M4 × 8

CP86757

XX X X

Bulkhead reducing union 1/8 × 1/16-inch

CP72472

Septum injection port Assy

CP742983

Septum low bleed 10/pk (Spare part)

CP724384

ZF2SI Support 1/pk (Spare part)

CP742990

Unheated sample inlet

CP740570

Fitting ext. luerlock 10-32 thrd 1/pk

VLZLA1

Female luerlock adapter to 1/16-inch ftgs

CP914757

CP742983 VLZLA1 CP914757

Agilent 490 Micro GC

Installation Instructions 3

Mounting the Sample-in at the Front of the Agilent 490 Micro GC

1Remove the side and front panels of the Agilent 490 Micro GC.

2Make a hole in the preferred place on the front panel next to Sample 1. See

Figure 1.

3Install the sample bracket. See Figure 2.

Figure 1 Sample 1 front panel hole

Figure 2 Sample bracket

4Installation Instructions

Agilent 490 Micro GC

If using the Injection-Port CP490204 or CP490206 use the parts listed in

Figure 3.

If using the Injection-Port CP490205 or CP490207 use the parts listed in

Figure 4.

4Reinstall the front panel.

5In case of heated or unheated Sample-Inlet on the rear remove the

Sample-Inlet-Box.

Place the preassembled bracket above the sample parts. To fix the bracket use

three M4 Torx screws, p/n CP86757. See Figure 5 for placement of the screws.

Figure 3 Sample bracket parts for CP490204 or CP490206

Figure 4 Sample bracket parts for CP490205 or CP490207

1. CP742983

2. CP72472

3. CP86757

4. CP739952

1. VLZLA1

2. CP914757

3. CP740570

4. CP86757

5. CP739952

Agilent 490 Micro GC

Installation Instructions 5

The diagrams below show the differences for the different field kits (Figure 6

and Figure 7). Plumb the tubing according to these diagrams and Figure 8.

Figure 5 Sample bracket parts for CP490205 or CP490207

Figure 6 Diagram of unheated sample-in-Agilent 490 Micro GC for CP490204 or

CP490205

6Installation Instructions

Agilent 490 Micro GC

Figure 7 Diagram of unheated sample-in-Agilent 490 Micro GC for CP490206 or

CP490207

Figure 8 Diagram of unheated sample-in-Agilent 490 Micro GC

Agilent 490 Micro GC

Installation Instructions 7

6Make an 18 mm incision in the upper insulation plate as seen in Figure 9

and install it in the Sample-Inlet-Box, see Figure 10 and Figure 11.

7Reinstall the side panel.

Figure 9 Upper insulation plate

Figure 10 Sample-Inlet-Box without insulation

Figure 11 Sample-Inlet-Box with insulation

18 mm

Agilent Technologies

Warranty

The material contained in this document is provided “as is,” and is subject to being changed, without notice,

in future editions. Further, to the maximum extent permitted by applicable law, Agilent disclaims all warran-

ties, either express or implied, with regard to this manual and any information contained herein, including

but not limited to the implied warranties of merchantability and fitness for a particular purpose. Agilent shall

not be liable for errors or for incidental or consequential damages in connection with the furnishing, use, or

performance of this document or of any information contained herein. Should Agilent and the user have a

separate written agreement with warranty terms covering the material in this document that conflict with

these terms, the warranty terms in the separate agreement shall control.

©Agilent Technologies, Inc. 2017

Printed in USA and China

Second edition, August 2017

Agilent Technologies, Inc.

2850 Centerville Road

Wilmington, DE 19808-1610 USA

Andere Handbücher für 490 Micro GC

Inhaltsverzeichnis

Andere Agilent Technologies Laborausrüstung Handbücher

Agilent Technologies

Agilent Technologies TriScroll Exhaust Silencer Kit Bedienungsanleitung

Agilent Technologies

Agilent Technologies TS-8900 Betriebsanleitung

Agilent Technologies

Agilent Technologies Bravo Platform Bedienungsanleitung

Agilent Technologies

Agilent Technologies Archon Bedienungsanleitung

Agilent Technologies

Agilent Technologies 7697A Installationshandbuch

Agilent Technologies

Agilent Technologies Seahorse XFp Bedienungsanleitung

Agilent Technologies

Agilent Technologies 1260 Infinity II Bedienungsanleitung

Agilent Technologies

Agilent Technologies 8890 Bedienungsanleitung

Agilent Technologies

Agilent Technologies 7890A GC Benutzerhandbuch

Agilent Technologies

Agilent Technologies 1100 Series Bedienungsanleitung

Agilent Technologies

Agilent Technologies 6850 Series Bedienungs- und Montageanleitung

Agilent Technologies

Agilent Technologies 5890 Bedienungsanleitung

Agilent Technologies

Agilent Technologies InfinityLab LC Series Bedienungsanleitung

Agilent Technologies

Agilent Technologies 55B AA Bedienungsanleitung

Agilent Technologies

Agilent Technologies 7200 Bedienungsanleitung

Agilent Technologies

Agilent Technologies 1200 series Bedienungsanleitung

Agilent Technologies

Agilent Technologies PR02 Bedienungsanleitung

Agilent Technologies

Agilent Technologies Bravo Platform Bedienungsanleitung

Agilent Technologies

Agilent Technologies Labware MiniHub G5584A Bedienungsanleitung

Agilent Technologies

Agilent Technologies EXSLRSH110 Bedienungsanleitung

Agilent Technologies

Agilent Technologies 1290 Infinity II 2D-LC Solution Bedienungsanleitung

Agilent Technologies

Agilent Technologies 280-DS MQS Bedienungsanleitung

Agilent Technologies

Agilent Technologies 1147A Bedienungsanleitung

Agilent Technologies

Agilent Technologies Agilent 1260 Infinity Bedienungsanleitung

Beliebte Laborausrüstung Handbücher anderer Marken

Qiagen

Qiagen DML 3000 Bedienungsanleitung

Queensgate

Queensgate NANOSCAN OP400 Programmierhandbuch

Conviron

Conviron GEN1000-GE Bedienungsanleitung

Parr Instrument

Parr Instrument 4560 Bedienungsanleitung

IKA

IKA IC control Bedienungsanleitung

Integra

Integra DOSE IT Bedienungsanleitung

Endress+Hauser

Endress+Hauser Cleanfit CPA875 Bedienungsanleitung

NI PXI-5422 Handbuch

Collomix

Collomix Aqix Bedienungsanleitung

SPEX SamplePrep

SPEX SamplePrep 6875 Freezer/Mill Series Bedienungsanleitung

Ocean Insight

Ocean Insight FLAME-NIR+ Bedienungsanleitung

Parker

Parker ALIGN-MG-NA Bedienungsanleitung

BD 644787 Bedienungsanleitung

DENTAURUM

DENTAURUM Compact Megaplus Bedienungsanleitung

Biuged Laboratory Instruments

Biuged Laboratory Instruments BGD 626 Bedienungsanleitung

VWR

VWR SAS Super IAQ Bedienungsanleitung

illumina

illumina MiSeqDx Bedienungsanleitung

Yamato

Yamato BM510 Bedienungsanleitung