Agilent Technologies 5517B Bedienungsanleitung

Operating and Service

Manual

This manual applies directly to Agilent Model 5517B/C/D Laser Head

having serial number prefix listed below, unless accompanied by a

"Manual Updating Changes" package indicating otherwise.

SERIAL PREFIX NUMBER: 3745A for 5517B

3744A for 5517C

3741A for 5517D

New Instruments

This manual, with enclosed "Manual Changes" sheet, applies to Agilent

5517B/C/D Laser Heads having serial number prefixes as listed on the

"Manual Change" sheets.

Older Instruments

For serial prefix numbers below those listed above, refer to Section VII for

Manual Changes.

Agilent 5517B/C/D Laser Head

©Copyright Agilent

Technologies, Inc. 1987, 1993,

2000

Reproduction, adaptation, or

translations without prior

written permission is prohibited,

except as allowed under the

Printed: August 2000

Printed in USA

Manual part number

05517-90047

Certification and

Warranty

Certification

Agilent Technologies certifies

that this product met its

published specification at the

time of shipment from the

factory. Agilent further certifies

that its calibration

measurements are traceable to

the United States National

Institute of Standards and

Technology (formerly National

Bureau of Standards), to the

extent allowed by the Institute's

calibration facility, and to the

calibration facilities of other

International Standards

Organization members

Warranty

Agilent warrants Agilent

hardware, accessories and

supplies against defects in

materials and workmanship for

a period of one year from date of

shipment. If Agilent receives

notice of such defects during the

warranty period, Agilent will, at

its option, either repair or

replace products which prove to

be defective. Replacement

products may be either new or

like-new.

Agilent warrants that Agilent

software will not fail to execute

its programming instructions,

for the period specified above,

due to defects in material and

workmanship when properly

installed and used. If Agilent

receives notice of such defects

during the warranty period,

Agilent will replace software

media which does not execute its

programming instructions due

to such defects.

For detailed warranty

information, see back matter

Safety Considerations

General

This product and related

documentation must be

reviewed for familiarization

with this safety markings and

instructions before operation.

This product is a safety Class I

instrument (provided with a

protective earth terminal).

Before Applying Power

Verify that the product is set to

match the available line voltage

and the correct fuse is installed.

Refer to instructions in Chapter

1 of the Manual.

Before Cleaning

Disconnect the product from

operating power before

cleaning.

Safety Earth Ground

An uninterruptible safety earth

ground must be provided from

the mains power source to the

product input wiring terminals

or supplied power cable.

Warning Symbols That

May Be Used In This

Book

Instruction manual symbol; the

product will be marked with

this symbol when it is necessary

for the user to refer to the

instruction manual.

Indicates hazardous

voltages.

Indicates earth (ground)

terminal.

Safety Considerations

(contd)

Indicates terminal is connected

to chassis when such

connection is not apparent

Indicates Direct current

Indicates Alternating current.

WARNING

BODILY INJURY OR

DEATH MAY RESULT

FROM FAILURE TO

HEED A WARNING DO

NOT PROCEED BEYOND

A WARNING UNTIL THE

INDICATED CONDITIONS

ARE

FULLYUNDERSTOOD

AND MET.

CAUTION

Damage to equipment, or

incorrect measurement data,

may result from failure to heed

a caution Do not proceed

beyond a CAUTION until the

indicated conditions are fully

understood and met

These CAUTION labels are

required by the United States

Center for Devices and

Radiological Health. Failure to

follow their instructions may

result in personal injury

This symbol indicates laser

radiation

For additional safety and

acoustic noise information, see

back matter

Agilent Technologies, Inc 8.CD.L.03.11 97 R1 J CW1FL

Santa Clara Division

5301 Stevens Creek Boulevard

Santa Clara, California 95052-8059

END PRODUCT LASER SAFETY CONSIDERATIONS

The 5517B Laser Head complies with U.S. National Center for Devices and

Radiological Health regulations 21 CFR 1040.10 and 1040.11.

These regulations may also apply to the end product into which the 5517B will be

designed. Care must be taken to insure that the end product complies with all

applicable national and local laser safety regulations.

LASER HEAD SAFETY LABELS

TABLE OF CONTENTS

Section Title Page

I GENERAL INFORMATION........................................................................................ 1-1

1-1. Introduction 1-1

1 -4. Equipment Description 1-1

1-8. Manual Organization 1-2

1 -10. Instruments Covered by this Manual 1-2

1-14. Safety Considerations 1-3

1-16. Equipment Supplied 1-3

1-18. Available Accessories 1-3

1-22. Specifications 1-4

1-24. Recommended Test Equipment 1-5

1-26. Warranty 1-5

1-28. Options 1-6

1-29. Option 910 1-6

1-31. Support Options 1-6

II INSTALLATION............................................................................................................2-1

2-1. Introduction 2-1

2-3. Unpacking, Inspection, and Reshipment 2-1

2-5. Unpacking and Inspection .........................................................................2-1

2-7. Warranty Claims ........................................................................................2-1

2-9. Laser Tube Shipment.................................................................................2-1

2-11. Tagging for Service 2-2

2-13. Packaging for Reshipment 2-2

2-14. Installation 2-2

2-16. System Cabling 2-3

2-19. Power and Signal Connections 2-4

2-21. Grounding Considerations 2-8

2-23. Power Supply Requirements 2-8

2-25. Power Dissipation 2-8

2-27. Fusing 2-8

2-29. Dimensions 2-9

2-31. Mounting and Fixturing 2-10

2-39. Operational Verification Check 2-11

2-41. Operating Environment 2-11

2-42. Storage 2-11

2-43. Environment...............................................................................................2-11

III OPERATION..................................................................................................................3-1

3-1. Introduction 3-1

3-4. Power Application ......................................................................................3-1

3-6. HP 5517B Laser Head Front Panel Controls 3-2

3-8. HP 5517B Laser Head Rear Panel Indicators and Connectors 3-3

3-10. Operating Modes 3-4

3-12. Warmup Time Operating Notes 3-4

3-13. HP 10740A Coupler Based Systems - Manual Monitoring 3-5

3-14. Systems with HP 10745A or HP 10746A Cards - Automatic Monitoring 3-5

3-16. HP 10740A Coupler - Error Signal Information 3-5

3-17. HP 10746A Error Signal Processing 3-5

3-18. HP 10745A Background Information3-6

3-19. Program Modifications 3-6

TABLE OF CONTENTS (Continued)

Section Title Page

IV PERFORMANCE TESTS............................................................................................ 4-1

4-1. Introduction 4-1

4-3. Recommended Test Equipment 4-1

4-5. Test Record 4-1

4-7. HP 5517B Performance Test 4-1

4-9. Input Voltage Check ................................................................................. 4-1

4-11. Laser Power Output Test 4-2

4-13. Procedure 4-2

V ADJUSTMENTS.......................................................................................................... 5-1

5-1. Introduction 5-1

5-3. Safety Considerations 5-1

5-5. Recommended Test Equipment 5-1

5-7. Factory Selected Components 5-1

5-9. Adjustment Procedures 5-1

5-11. Reference Temperature Adjustments 5-2

5-14. reliminary Procedure5-2

5-17. aser Tube Current Adjustment 5-4

VI REPLACEABLE PARTS ............................................................................................ 6-1

6-1. Introduction 6-1

6-3. Reference Designations 6-1

6-5. Replaceable Parts 6-1

6-8. How to Order a Part 6-1

6-10. Parts Identification 6-1

6-14. Contacting Hewlett-Packard 6-2

6-18. Cabinet Parts and Hardware 6-2

VII MANUAL CHANGES.................................................................................................. 7-1

7-1. Introduction 7-1

7-3. Manual Cha nges 7-1

7-6. Older Instruments 7-1

VIII SERVICE .................................................................................................................. 8-1

8-1. Introduction 8-1

8-3. Theory of Operation .................................................................................. 8-1

8-5. Recommended Test Equipment ............................................................... 8-1

8-7. Service Aids............................................................................................... 8-1

8-9. Schematic Diagram Symbols and Reference Designations.................... 8-1

8-11. Cleaning Printed Circuit Boards 8-2

8-14. Safety Considerations .............................................................................. 8-2

8-16. Safety Symbols 8-4

8-18. Before and After Service Product Safety Checks 8-5

8-20. Laser Head Block Diagram Description8-5

8-28. Laser Tuning .............................................................................................8-8

8-31. Warmup Mode Tuning 8-8

8-36. Optical Mode Tuning.................................................................................8-10

8-42. Laser Assembly Optics..............................................................................8-12

8-44. Reference Receiver 8-13

8-46. Shutter Mechanism 8-13

8-48. Assembly/Schematic Locations of HP 5517B Block Diagram Elements 8-13

8-49. Rear Panel LED Indicators 8-13

TABLE OF CONTENTS (Continued)

Section Title .........................................................................................................Page

8-51. built-in Test Aids 8-13

8-54. Assembly Removal Instructions 8-15

8-65. HP 5517B Trouble Isolation 8-1 9

8-66. Quick Tuning Checkout Procedure 8-19

8-70. Testing the Liquid Crystal Switch 8-20

8-73. HP 5517B Trouble Isolation Procedure 8-23

8-75. A1 Connector Board Circuit Theory 8-24

8-78. Power Distribution 8-25

8-82. A1 Connector Board Troubleshooting 8-25

8-84. Rear Panel LED Operational Check 8-25

8-86. A2 High Voltage Power Supply Circuit Theory 8-26

8-88. High Voltage Power Supply Troubleshooting 8-27

8-90. A3 Controller/Reference BD & A4 Sampler BD Circuit Theory 8-28

8-91. Introduction 8-28

8-94. Clock (A) 8-29

8-96. Dividers (B) 8-29

8-98. State Machine (E) 8-30

8-104. Liquid Crystal (D) 8-30

8-108. Photodiode and Amplifier (D) 8-30

8-110. Warm-up Error Amplifier and Comparator 0) 8-31

8-113. Subtracting Sample and Hold (E) 8-31

8-117. Power Amplifier 8-32

8-120. Reference Receiver (L) 8-32

8-124. Line Driver (K) 8-32

8-126. Power-On Reset (POR) (G) 8-32

8-128. Laser Head Power Supply Conditioning (C) 8-32

8-130. A4 Sampler Board 8-32

8-132. A3 Controller/Reference Board Troubleshooting8-32

8-134. Standard Troubleshooting Procedures 8-33

8-136. Digital Troubleshooting 8-33

8-139. Photodiode and Amplifier Troubleshooting 8-37

8-141. Liquid Crystal Troubleshooting 8-38

8-143. Subtracting Sample and Hold Troubleshooting 8-39

8-145. Power Amplifier Troubleshooting 8-40

8-146. Warm-Up Error Amplifier Troubleshooting 8-41

8-148. Power Supply Troubleshooting 8-42

8-150. Reference Receiver Troubleshooting 8-42

Figure 1-1. HP 5517B Laser Head

Andere Handbücher für 5517B

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Agilent Technologies Laborausrüstung Handbücher

Agilent Technologies

Agilent Technologies Bravo Platform Bedienungsanleitung

Agilent Technologies

Agilent Technologies 6850 Series Bedienungs- und Montageanleitung

Agilent Technologies

Agilent Technologies InfinityLab LC Companion Bedienungsanleitung

Agilent Technologies

Agilent Technologies MX3000P Sicherheitsleitfaden

Agilent Technologies

Agilent Technologies 1260 Infinity II Bedienungsanleitung

Agilent Technologies

Agilent Technologies XY Bedienungsanleitung

Agilent Technologies

Agilent Technologies 100 Bedienungsanleitung

Agilent Technologies

Agilent Technologies 75000 Series C Bedienungsanleitung

Agilent Technologies

Agilent Technologies N1021B Bedienungsanleitung

Agilent Technologies

Agilent Technologies 1260 Infinity VL Bedienungsanleitung

Agilent Technologies

Agilent Technologies AssayMAP 96AM Betriebsanleitung

Agilent Technologies

Agilent Technologies 5100 ICP-OES Bedienungsanleitung

Agilent Technologies

Agilent Technologies E7473A Bedienungsanleitung

Agilent Technologies

Agilent Technologies 2200 TapeStation Bedienungsanleitung

Agilent Technologies

Agilent Technologies Varian CP-8400 Bedienungsanleitung

Agilent Technologies

Agilent Technologies TS-5400 Bedienungsanleitung

Agilent Technologies

Agilent Technologies G1289 Bedienungsanleitung

Agilent Technologies

Agilent Technologies OmnoBER 725 Bedienungsanleitung

Agilent Technologies

Agilent Technologies NovoCyte Quanteon Handbuch

Agilent Technologies

Agilent Technologies IDP3GBKIT Bedienungsanleitung

Agilent Technologies

Agilent Technologies 5517B Bedienungsanleitung

Agilent Technologies

Agilent Technologies InfinityLab LC Series Bedienungsanleitung

Agilent Technologies

Agilent Technologies 708-DS Installationsanleitung

Agilent Technologies

Agilent Technologies 5100 ICP-OES Betriebsanleitung

Beliebte Laborausrüstung Handbücher anderer Marken

Qiagen

Qiagen DML 3000 Bedienungsanleitung

Queensgate

Queensgate NANOSCAN OP400 Programmierhandbuch

Conviron

Conviron GEN1000-GE Bedienungsanleitung

Parr Instrument

Parr Instrument 4560 Bedienungsanleitung

IKA

IKA IC control Bedienungsanleitung

Integra

Integra DOSE IT Bedienungsanleitung

Endress+Hauser

Endress+Hauser Cleanfit CPA875 Bedienungsanleitung

NI PXI-5422 Handbuch

Collomix

Collomix Aqix Bedienungsanleitung

SPEX SamplePrep

SPEX SamplePrep 6875 Freezer/Mill Series Bedienungsanleitung

Ocean Insight

Ocean Insight FLAME-NIR+ Bedienungsanleitung

Parker

Parker ALIGN-MG-NA Bedienungsanleitung

BD 644787 Bedienungsanleitung

DENTAURUM

DENTAURUM Compact Megaplus Bedienungsanleitung

Biuged Laboratory Instruments

Biuged Laboratory Instruments BGD 626 Bedienungsanleitung

VWR

VWR SAS Super IAQ Bedienungsanleitung

illumina

illumina MiSeqDx Bedienungsanleitung

Yamato

Yamato BM510 Bedienungsanleitung