Agilent Technologies G5562A Einrichtungshandbuch



G5562A, G5563A

Bravo Platform

Safety and Installation

Guide

For Research Use Only. Not for use in

diagnostic procedures.

Original Instructions

Notices

No part of this manual may be reproduced

in any form or by any means (including

electronic storage and retrieval or

translation into a foreign language) without

prior agreement and written consent from

Agilent Technologies, Inc. as governed by

United States and international copyright

laws.

User Guide Part Number

G5563-90002

Edition

Revision A,, October 2017

Contact Information

Agilent Technologies Inc.

Automation Solutions

5301 Stevens Creek Blvd.

Santa Clara, CA 95051

USA

Technical Support: 1.800.979.4811 (US) or

+1.408.345.8011 (rest of world)

[email protected]om

Customer Service: 800-227-9770 (US and

Canada)

By country: http://www.agilent.com/en-

us/contact-us/page

Documentation feedback:

[email protected]

Web:

http://www.agilent.com/en-us/products/

automation-solutions

Acknowledgements

Microsoft® and Windows® are either

registered trademarks or trademarks of the

Microsoft Corporation in the United States

and other countries.

Warranty

The material contained in this docu-

ment is provided “as is,” and is sub-

ject to being changed, without notice,

in future editions. Further, to the max-

imum extent permitted by applicable

law, Agilent disclaims all warranties,

either express or implied, with regard

to this manual and any information

contained herein, including but not

limited to the implied warranties of

merchantability and fitness for a par-

ticular purpose. Agilent shall not be

liable for errors or for incidental or

consequential damages in connection

with the furnishing, use, or perfor-

mance of this document or of any

information contained herein. Should

Agilent and the user have a separate

written agreement with warranty

terms covering the material in this

document that conflict with these

terms, the warranty terms in the sep-

arate agreement shall control.

Technology Licenses

The hardware and/or software described in

this document are furnished under a

license and may be used or copied only in

accordance with the terms of such license.

Restricted Rights Legend

If software is for use in the performance of

a U.S. Government prime contract or sub-

contract, Software is delivered and

licensed as “Commercial computer soft-

ware” as defined in DFAR 252.227-7014

(June 1995), or as a “commercial item” as

defined in FAR 2.101(a) or as “Restricted

computer software” as defined in FAR

52.227-19 (June 1987) or any equivalent

agency regulation or contract clause. Use,

duplication or disclosure of Software is

subject to Agilent Technologies’ standard

commercial license terms, and non-DOD

Departments and Agencies of the U.S. Gov-

ernment will receive no greater than

Restricted Rights as defined in FAR 52.227-

19(c)(1-2) (June 1987). U.S. Government

users will receive no greater than Limited

Rights as defined in FAR 52.227-14

(June1987) or DFAR 252.227-7015 (b)(2)

(November 1995), as applicable in any

technical data.

Safety Notices

A WARNING notice denotes a

hazard. It calls attention to an

operating procedure, practice, or the

like that, if not correctly performed or

adhered to, could result in personal

injury or death. Do not proceed

beyond a WARNING notice until the

indicated conditions are fully

understood and met.

A CAUTION notice denotes a hazard. It

calls attention to an operating procedure,

practice, or the like that, if not correctly

performed or adhered to, could result in

damage to the product or loss of important

data. Do not proceed beyond a CAUTION

notice until the indicated conditions are

fully understood and met.

iiiG5562A, G5563A Bravo Platform Safety and Installation Guide

Contents

Preface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . v

About this guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . vi

Reporting problems. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . viii

1. Safety guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

General safety information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Safety and regulatory compliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Emergency stops. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Mechanical hazards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Ergonomics. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Cut hazard. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

2. Installing the Bravo Platform. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Installation workflow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Laboratory setup requirements. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Installing the platepads . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Connecting the Bravo Platform. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Installing the liquid-handling head . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Bravo light curtains and shields . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

Installing the Standard Light Curtain and shields . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

Installing the rear shield . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

Installing the dust cover. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48

Starting up and shutting down . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49

Contents

iv G5562A, G5563A Bravo Platform Safety and Installation Guide

G5562A, G5563A Bravo Platform

Safety and Installation Guide



Preface

This preface contains the following topics:

•“About this guide” on page vi

•“Reporting problems” on page viii

Preface

About this guide

vi G5562A, G5563A Bravo Platform Safety and Installation Guide

About this guide

Who should read this guide

This user guide is for people with the following job roles:

What this guide covers

This guide describes the following for the G5562A, G5563A Bravo Platform:

•Potential safety hazards of the Bravo Platform and how to avoid them

For general safety information, see the Automation Solutions Products

General Safety Guide.

•Site requirements for the Bravo Platform

Use this information to plan the space for the Bravo Platform. Make sure

your site meets the requirements outlined in this guide before installing the

device.

•Installation instructions for the Bravo Platform and the safety equipment

What is new in this revision

Job role Responsibilities

Installer Unpacks, installs, and tests the device before it is used.

Integrator Configures hardware and writes software.

Lab manager,

administrator,

or technician

•Manages the automation system that contains the

device

•Develops the applications that are run on the system

•Develops training materials and standard operating

procedures for operators

Operator Performs the daily production work on the device and

solves routine problems.

Revision description See...

Updated the regulatory compliance

standards.

“Safety and regulatory

compliance” on page 3

Revised the light curtain description to

include both the Standard and

Wraparound Light Curtains.

“Bravo light curtains and

shields” on page 29

Added a topic to describe the new Bravo

dust cover.

“Installing the dust cover” on

page 48

vii

Preface

About this guide

G5562A, G5563A Bravo Platform Safety and Installation Guide

Related user instructions

Use this guide in conjunction with the following:

•Automation Solutions Products General Safety Guide. Provides general

safety information and describes potential safety hazards that you might

encounter when using Agilent Automation Solutions products. A copy of

this safety guide is included with your shipment.

•Bravo Platform Unpacking Guide. Describes how to unpack the Bravo

device from the shipping container.

•Bravo Platform User Guide. Describes how to set up, operate, and

maintain the Bravo Platform and accessories.

•Pump Module User Guide. Describes how to install the Pump Module.

•VWorks Automation Control Setup Guide. Explains how to define labware

and labware classes, liquid classes, and pipetting techniques, and how to

track and manage labware in storage.

•VWorks Automation Control User Guide. Explains how to create protocols,

set task parameters, and run protocols.

Note: For instructions on how to install and set up the G5571A AssayMAP

Bravo Platform, Agilent service engineers should see the AssayMAP Bravo

Platform Installation Guide.

Where to find user information

The Agilent Automation Solutions user information is available in the following

locations:

•VWorks knowledge base. The help system that contains information about

all the Agilent Automation Solutions products is available from the Help

menu within the VWorks software.

To open the VWorks knowledge base:

–Within the software, select Help > Knowledge Base or press F1.

–From the Microsoft Windows All Apps menu, select Agilent Technologies >

VWorks Knowledge Base.

•PDF files. The PDF files of the user guides are installed with the VWorks

software and are on the software CD that is supplied with the product. A

PDF viewer is required to open a user guide in PDF format. You can

download a free PDF viewer from the internet. For information about using

PDF documents, see the user documentation for the PDF viewer.

•Agilent website. You can search the online Automation Solutions knowledge

base or download the latest version of any PDF file from the following

website: www.agilent.com/chem/askb

Preface

Reporting problems

viii G5562A, G5563A Bravo Platform Safety and Installation Guide

Reporting problems

Contacting Automation Solutions Technical Support

If you find a problem with the Bravo Platform, contact Agilent Automation

Solutions Technical Support. For contact information, see Notices on the back

of the title page.

Reporting hardware problems

When contacting Agilent Technologies, make sure you have the serial number

of the device ready. You can find the serial number on the Bravo serial

number label located on the back of the device.

Reporting software problems

When you contact Automation Solutions Technical Support, make sure you

provide the following:

•Short description of the problem

•Relevant software version number (for example, automation control

software, diagnostics software, and firmware)

•Error message text (or screen capture of the error message dialog box)

•Relevant files, such as log files

Reporting user guide problems

If you find a problem with this user guide or have suggestions for

improvement, send your comments in an email to

documentation.aut[email protected].

G5562A, G5563A Bravo Platform

Safety and Installation Guide



Safety guidelines

This chapter contains the following topics:

•“General safety information” on page 2

•“Safety and regulatory compliance” on page 3

•“Emergency stops” on page 5

•“Mechanical hazards” on page 6

•“Ergonomics” on page 9

•“Cut hazard” on page 10

1 Safety guidelines

General safety information

2G5562A, G5563A Bravo Platform Safety and Installation Guide

General safety information

Before installing and using the Bravo Platform

Before installing and using the Bravo Platform, make sure you are aware of the

potential hazards and understand how to avoid being exposed to them. You

must be properly trained in the correct and safe installation and operation of

the device. For the intended product use statement and safety label

descriptions, see the Automation Solutions Products General Safety Guide.

The following figure shows the location of the warning labels on the Bravo

Platform.

Figure Bravo Platform warning label location

WARNING Changing or modifying the Bravo Platform safety equipment may prevent

the safe operation of the Bravo Platform, invalidate its safety compliance, and lead to

personal injury or property damage. Any customer who does not use the supplied safety

equipment or who modifies the supplied safety equipment assumes full responsibility for

providing an appropriate level of safety for its operators and for providing the applicable

safety compliance marking and documentation.

Andere Handbücher für G5562A

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Agilent Technologies Laborausrüstung Handbücher

Agilent Technologies

Agilent Technologies InfinityLab LC Series Bedienungsanleitung

Agilent Technologies

Agilent Technologies TS-5400 Bedienungsanleitung

Agilent Technologies

Agilent Technologies 7683 Bedienungsanleitung

Agilent Technologies

Agilent Technologies 5DX Bedienungsanleitung

Agilent Technologies

Agilent Technologies 1220 Infinity II LC Bedienungsanleitung

Agilent Technologies

Agilent Technologies Cary 8454 Bedienungsanleitung

Agilent Technologies

Agilent Technologies Truevolt Series Service-Handbuch

Agilent Technologies

Agilent Technologies 8000 Series Bedienungsanleitung

Agilent Technologies

Agilent Technologies gc/ms series Bedienungsanleitung

Agilent Technologies

Agilent Technologies TS-8989 PXI Bedienungsanleitung

Agilent Technologies

Agilent Technologies Velocity11 VSpin Bedienungsanleitung

Agilent Technologies

Agilent Technologies 100 Bedienungsanleitung

Agilent Technologies

Agilent Technologies Genomic DNA ScreenTape System Bedienungsanleitung

Agilent Technologies

Agilent Technologies G2570A GC/MSD Betriebsanleitung

Agilent Technologies

Agilent Technologies 8890 Merkblatt

Agilent Technologies

Agilent Technologies 1260 Infinity II Bedienungsanleitung

Agilent Technologies

Agilent Technologies 490 Micro GC Bedienungsanleitung

Agilent Technologies

Agilent Technologies 1260Infinity II Bio-inert FractionCollector Bedienungsanleitung

Agilent Technologies

Agilent Technologies G3430-68640 Bedienungsanleitung

Agilent Technologies

Agilent Technologies 1260 Infinity Bedienungsanleitung

Agilent Technologies

Agilent Technologies Magnis NGS Prep System Bedienungsanleitung

Agilent Technologies

Agilent Technologies Seahorse XFp Bedienungsanleitung

Agilent Technologies

Agilent Technologies 7890A GC Benutzerhandbuch

Agilent Technologies

Agilent Technologies Varian 325-MS LC/MS Bedienungsanleitung

Beliebte Laborausrüstung Handbücher anderer Marken

Qiagen

Qiagen DML 3000 Bedienungsanleitung

Queensgate

Queensgate NANOSCAN OP400 Programmierhandbuch

Conviron

Conviron GEN1000-GE Bedienungsanleitung

Parr Instrument

Parr Instrument 4560 Bedienungsanleitung

IKA

IKA IC control Bedienungsanleitung

Integra

Integra DOSE IT Bedienungsanleitung

Endress+Hauser

Endress+Hauser Cleanfit CPA875 Bedienungsanleitung

NI PXI-5422 Handbuch

Collomix

Collomix Aqix Bedienungsanleitung

SPEX SamplePrep

SPEX SamplePrep 6875 Freezer/Mill Series Bedienungsanleitung

Ocean Insight

Ocean Insight FLAME-NIR+ Bedienungsanleitung

Parker

Parker ALIGN-MG-NA Bedienungsanleitung

BD 644787 Bedienungsanleitung

DENTAURUM

DENTAURUM Compact Megaplus Bedienungsanleitung

Biuged Laboratory Instruments

Biuged Laboratory Instruments BGD 626 Bedienungsanleitung

VWR

VWR SAS Super IAQ Bedienungsanleitung

illumina

illumina MiSeqDx Bedienungsanleitung

Yamato

Yamato BM510 Bedienungsanleitung