Airlink101 AWLC4030 Bedienungsanleitung

Model # AWLC4030

User’s Manual

Ver. 1A

Table of Contents

Package Contents ................................................................................................................3

System Requirements .......................................................................................................... 3

Introduction........................................................................................................................... 4

Installation Considerations ................................................................................................... 6

Installing the Utility................................................................................................................ 7

Install Driver........................................................................................................................ 10

Using the WLAN Monitor.................................................................................................... 12

Troubleshooting.................................................................................................................. 22

Technical Specifications...................................................................................................... 23

Package Contents

•108Mbps SuperG Wireless Cardbus Adapter

•Quick Installation Guide

•Manual and Drivers/Utility on CD

Note: If any of the above items are missing, please contact your reseller.

System Requirements

•A laptop computer with an available 32-bit Cardbus slot

•Windows XP, Windows 2000, Windows ME, or Windows 98SE

•At least 32 MB of memory and a 300 MHz processor or higher

•An 802.11b/g Access Point for (Infrastructure Mode) or another computer with

an 802.11b/g wireless card installed (for Ad-Hoc Mode)

Introduction

The 108Mbps SuperG Wireless CARDBUS Adapter is an advanced IEEE 802.11b/g

compatible, high performance wireless card that supports data transfer speeds of up to 54

Mbps or 108Mbps in SuperG mode.

The 108Mbps SuperG Wireless CARDBUS Adapter comes with software drivers for the

most popular Microsoft Windows operating systems and can be integrated into a larger

network, running Windows XP, Windows 2000, Windows ME, Windows 98SE, in either Ad

Hoc mode (without an Access Point) or Infrastructure mode (with an Access Point).

Product Features

•Compatible with IEEE 802.11b standard to provide wireless Ethernet data rates of

up to11Mbps data rate

•Compatible with IEEE 802.11g high rate standard to provide wireless 54Mbps data

rate or 108Mbps data rate (108Mbps requires a SuperG enabled access

point/wireless router)

•Operation at dual 2.4 GHz frequency bands to meet worldwide regulations

•Dynamic data rate scaling at 1, 2, 5.5, and 11Mbps for IEEE 802.11b

•Dynamic data rate scaling at 6, 9, 12, 18, 24, 36, 48, 54,108 Mbps for IEEE

802.11g

•Maximum reliability, throughput and connectivity with automatic data rate switching

•Supports wireless data encryption with 64/128/152-bit WEP for security

•Supports infrastructure networks via Access Point and ad-hoc network via peer-to-

peer communication

•Built-in dual diversity antenna for reduction of interference in a multi-path

environment

•Supports AES enhanced security

•Supports DFS/TPC for European operation

•Supports CARDBUS (32-bit) Type II PC Card

•User-friendly configuration and diagnostic utilities

•Driver support for Windows 98SE, ME, 2000, and XP

LEDS

The 108Mbps SuperG Wireless CARDBUS Adapter has two LEDs: POWER and

ACTIVITY.

Network Mode LED Activity

Network Activity Both LEDs flash in

unison

Searching for a

Network Connection Both LEDs flash

alternately

Associated with the

Network, but No

Activity Both LEDs flicker

dimly

Power Save Mode

(Power-up or Reset) POWER LED – slow

rate blink

Card is disabled Only the POWER

LED flashes

Installation Considerations

Designed to traverse distances up to 900 feet (~300 meters), the 108Mbps SuperG

Wireless CARDBUS Adapter lets you access your network from your computer virtually

anywhere you want. Keep in mind, however, that the number and thickness of walls,

ceilings or other objects that the wireless signals must pass through may limit the range.

Typical ranges vary depending on the types of materials and background RF noise in your

home or business. The key to maximizing the transmission range is to follow these basic

principles:

1. Keep the number of walls and ceilings between the Access Point and your receiving

device to a minimum - Each wall or ceiling can reduce your Wireless product’s range

from 3-90 feet (1-30 meters.) For some businesses or for a large residential home

deployment, it may be beneficial to have more than one access point with overlapping

coverage.

2. Be aware of the direct line between Access Points and computers with wireless cards -

A wall that is 1.5 feet thick (.5 meters), at a 45-degree angle appears to be almost 3

feet (1 meter) thick. At a 2-degree angle it looks as if it were over 42 feet (14 meters)

thick! Try to make sure that the Access Points and Cards are positioned so that the

signal will travel in as straight a line through a wall or ceiling as possible for better

reception.

3. Building Materials make a difference - A solid metal door or aluminum studs can have

a negative effect on range. Try to position Access Points and computers with wireless

cards so that the signal passes through drywall or open doorways and not other

materials.

4. Make sure that the antenna is positioned for best reception by using the software

signal strength tools included with your 108Mbps SuperG Wireless CARDBUS

Adapter.

5. Keep your product away (at least 3-6 feet or 1-2 meters) from electrical devices or

appliances that generate RF noise.

For the average residence, range should not be a problem. If you experience low or no

signal strength in areas of your home that you wish to access, consider positioning the

Access Point in a location directly between the computers with wireless cards that will be

connected. Additional Access Points can be connected to provide better coverage in

rooms where the signal does not appear as strongly as desired.

Installing the Utility

Step 1 Before installing the utility software, do not insert the cardbus adapter into your

computer. If the cardbus is inserted already, Windows will detect the adapter and request

for a driver. Click Cancel to quit the wizard and remove the cardbus adapter from your

computer.

Step 2 Insert the Driver & Utility CD into your CD drive.

Step 3 Click on Install Utility at the autorun page.

Note: If the autorun page doesn’t appear automatically go to Start, Run, and type

D:\autorun.exe (where D is the letter of your cd drive) and click OK.

Step 4 Click Next at the welcome screen.

Step 5 Click Next to accept the default destination folder to install the software or click

Browse to manually select a different destination folder.

Step 6 Click Next at the Select Program Folder screen.

Step 7 Click Continue Anyway at the Windows Logo Screen.

Step 8 Verify “Yes, I want to restart my computer now” is selected and click Finish to

restart your computer.

Install Driver

Note: For Windows 98SE and ME users, you may be prompted to insert the Windows

98SE or ME CD during the driver installation. Be sure to have your Windows 98SE or ME

CD ready.

Step 1 After the computer is restarted, insert the cardbus adapter into the computer and

wait for the Found New Hardware Wizard to appear. The Found New Hardware Wizard

will look different depending on your operating system. Follow the on-screen instructions

to complete the installation.

Step 2 Select Install the software automatically and click Next.

For Windows 98SE and ME, select “Search for the best driver for your device” and

click Next. Verify all the check boxes are unchecked except for “Specify a location” and

click Browse.

Step 3 Select the driver from the “Driver” folder and click Next.

Andere Handbücher für AWLC4030

Inhaltsverzeichnis

Andere Airlink101 Adapter Handbücher

Airlink101

Airlink101 AWLL6077 Bedienungsanleitung

Airlink101

Airlink101 AGIGAUSB Bedienungsanleitung

Airlink101

Airlink101 AFEP100 Bedienungsanleitung

Airlink101

Airlink101 AWLC3026 Bedienungsanleitung

Airlink101

Airlink101 AWLL5166HP Bedienungsanleitung

Airlink101

Airlink101 AWLL3026 Bedienungsanleitung

Airlink101

Airlink101 Wireless Cardbus Adapter AWLC3028 Bedienungsanleitung

Airlink101

Airlink101 AWLL5025 Bedienungsanleitung

Airlink101

Airlink101 AWLL5055 Bedienungsanleitung

Airlink101

Airlink101 AWLL5077 Bedienungsanleitung

Airlink101

Airlink101 AWLL6077V2 Bedienungsanleitung

Airlink101

Airlink101 AWLC6070 Bedienungsanleitung

Airlink101

Airlink101 AWLL3055 Bedienungsanleitung

Airlink101

Airlink101 AWLC3026T Bedienungsanleitung

Airlink101

Airlink101 AWLL4030 Bedienungsanleitung

Airlink101

Airlink101 AWLL3028 Bedienungsanleitung

Airlink101

Airlink101 USB 2.0 Ethernet Adapter ASOHOUSB Bedienungsanleitung

Airlink101

Airlink101 AWLL7025 Bedienungsanleitung

Airlink101

Airlink101 AWLL6086 Bedienungsanleitung

Airlink101

Airlink101 Golden N AWLL6075 Bedienungsanleitung

Airlink101

Airlink101 AWLL3026 Bedienungsanleitung

Airlink101

Airlink101 AWLL6077V2 Bedienungsanleitung

Airlink101

Airlink101 AWLL5026 Bedienungsanleitung

Airlink101

Airlink101 Golden N AWLL6075 Bedienungsanleitung

Beliebte Adapter Handbücher anderer Marken

PCB Piezotronics

PCB Piezotronics 090B274 Bedienungsanleitung

Auvidea

Auvidea J20 Produkthandbuch

Gossen MetraWatt

Gossen MetraWatt AT3-III E Bedienungsanleitung

Akribis

Akribis ITF-21-BISS-MIT Bedienungsanleitung

Tenda

Tenda W54U Bedienungsanleitung

ROHO

ROHO AGILITY Bedienungsanleitung

PROLiNK

PROLiNK WN2001 Bedienungsanleitung

Hawking

Hawking HUF2 Bedienungsanleitung

NETGEAR

NETGEAR XAV101v1 - Powerline AV Ethernet Adapter Bedienungsanleitung

Philips

Philips SWA4554S/10 Bedienungsanleitung

JVC

JVC TS-C9D2B Gebrauchsanweisung

NETGEAR

NETGEAR A6100 Bedienungsanleitung

D-Link

D-Link DWA-121 Bedienungsanleitung

Philips

Philips SWA2037 Bedienungsanleitung

Basalte

Basalte 0610-20 Bedienungsanleitung

Yealink

Yealink EHS40 Bedienungsanleitung

Balluff

Balluff BIC 1B0-IT1A7-Q40KFU-SM4A4A Bedienungsanleitung

RCA

RCA AH57R Bedienungsanleitung