Airlink101 AWLL5055 Bedienungsanleitung

Quick Installation Guide

Wireless N 150 USB Adapter with 10dBi Antenna

Model # AWLL5055

Install the Wireless USB Adapter

This Quick Installation Guide only provides the basic installation instructions.

For detailed instructions of other advanced features, please refer to the User’s

Manual that can be found on the provided CD.

For Macintosh users, you can find the software and installation instructions for

MAC 10.4/10.5/10.6 under the MAC folder on the provided CD.

Step 1.1 Insert the USB adapter into an available USB port of your computer.

Step 1.2 Click Cancel when you see the Found New Hardware Wizard.

Section 1

Ver. 1.0

Package Contents:

•Wireless N 150 USB Adapter

with 10dBi Antenna

•Driver & Utility CD

•Quick Installation Guide

Windows XP/2000 Users:

Windows 7/Vista Users:

Step 1.3 Insert the Installation CD in the CD drive. The autorun screen will pop

up. Select Install Utility and Driver from the menu.

Windows XP/2000 Users: If the Autorun screen doesn’t appear automatically,

go to Start, Run, and type D:\Utility\Setup.exe (where D is the letter of your

CD drive) and click OK.

Windows 7/Vista Users:When you get warning message(s), make sure that

you give permission to continue with the installation of the driver software.

Step 1.4 The Installation screen will pop up. Click Next at the screen.

Step 1.5 Click Install to start the installation.

Step 1.6 Windows X/2000P Users: click on Continue Anyway.

Windows 7/Vista Users: click on Install this driver software anyway.

Please wait when Windows is installing the driver for Airlink101 Wireless Adapter

and the utility, Airlink101 Wireless Monitor.

Step 1.7 Click Finish to complete the installation.

Step 1.8 Select Yes, I will restart my computer now. Click Finish to

complete the installation.

The driver and utility have been installed. Please continue to Section 2.

Connect to Wireless Network

For Windows 7 Users:

You will need to use the utility built in Windows 7 to manage this wireless USB

adapter. Currently, Airlink101 Wireless Monitor does not support Windows 7.

Step 2.1 Click on the wireless icon in the system tray at the bottom right-hand

corner of your screen. A list of available network will pop up. Select the one you

want to connect to and click Connect.

Step 2.2 Enter the network security key if the wireless network you are

attempting to connect to has wireless encryption enabled. Click OK. The

connection should be now established.

Section 2

For Windows Vista/XP/2000 Users:

Step 2.1 Open the Airlink101 Wireless Monitor utility by double clicking on the

icon in the system tray at the bottom right-hand corner of your screen.

Step 2.2 Click the Available Network tab of the Wireless Monitor, select the

wireless network that you wish to connect to, and click Add to Profile.

If the network that you are attempting to connect does not have encryption

enabled, you will receive a warning about connecting to an unsecured network.

Click OK to complete the connection. Go to Step 2.4.

Step 2.3 Enter the wireless security key into the Network Key and Confirm

Network Key boxes. Click OK.

The wireless adapter will automatically detect the type of Network

Authentication and the Data encryption. All you need to do is to enter the

Network Key in the appropriate boxes according to the settings of the wireless

router.

Step 2.4 The connection should be now established. Under the utility

Airlink101 Wireless Monitor, go to General tab to check the status of the

connection. Verify that IP Address, Subnet Mask and Gateway have valid

numbers assigned to them (instead of all 0’s). The Status should be Associated,

and there should be green bars next to Signal Strength and Link Quality.

Congratulations! You have now connected to the wireless network

successfully.

1. If you cannot open the wireless monitor utility, make sure that the USB

adapter is inserted firmly into the USB port.

2. If you cannot connect to the wireless router, you may want to double check

the wireless security settings on the router. The network key you entered in

Step 2.3 must match with the settings on the wireless router.

3. If you are experiencing problems with the connection such as low signal

strength, slow connection speed, or unstable wireless connection, you can try

to tune your router’s signal by changing the channels on the router and/or by

adjusting the direction of the antenna(s). You do not need to change the

channel on the Adapter; it will automatically pick up the new channel after you

reboot the router. Your router has 11 different channels to choose from. Keep

going through the channels until you find one that gives you a stable connection.

For instructions on changing channels, refer to the documentation that comes

with the router.

Technical Support

E-mail: support@airlink101.com

Toll Free: 1-888-746-3238

Website: www.airlink101.com

*Theoretical maximum wireless signal rate derived from IEEE standard 802.11 specifications. Actual data

throughput will vary. Network conditions and environmental factors, including volume of network traffic, building

materials and construction, mix of wireless products used, radio frequency interference (e.g., cordless telephones

and microwaves) as well as network overhead lower actual data throughput rate. Compatibility with 802.11n

devices from other manufacturers is not guaranteed. Specifications are subject to change without notice. Photo of

product may not reflect actual content. All products and trademarks are the property of their respective owners.

Section 3

Troubleshooting

Andere Handbücher für AWLL5055

Inhaltsverzeichnis

Andere Airlink101 Adapter Handbücher

Airlink101

Airlink101 ATVUSB01 Bedienungsanleitung

Airlink101

Airlink101 300N Wireless Cardbus Adapter AWLC6080 Bedienungsanleitung

Airlink101

Airlink101 AFEP100 Bedienungsanleitung

Airlink101

Airlink101 AWLL6090 Bedienungsanleitung

Airlink101

Airlink101 AWLL5055 Bedienungsanleitung

Airlink101

Airlink101 AWLL6077V2 Bedienungsanleitung

Airlink101

Airlink101 AWLL5025 Bedienungsanleitung

Airlink101

Airlink101 AWLL5166HP Bedienungsanleitung

Airlink101

Airlink101 AWLC6045 Bedienungsanleitung

Airlink101

Airlink101 AWLL6077 Bedienungsanleitung

Airlink101

Airlink101 AWLC3026 Bedienungsanleitung

Airlink101

Airlink101 USB 2.0 Ethernet Adapter ASOHOUSB Bedienungsanleitung

Airlink101

Airlink101 Golden N AWLL6075 Bedienungsanleitung

Airlink101

Airlink101 AWLL5088V2 Bedienungsanleitung

Airlink101

Airlink101 APL8512 Bedienungsanleitung

Airlink101

Airlink101 AWLL5055 Bedienungsanleitung

Airlink101

Airlink101 AWLL3028 Bedienungsanleitung

Airlink101

Airlink101 ABT-U200 Bedienungsanleitung

Airlink101

Airlink101 Wireless Cardbus Adapter AWLC3028 Bedienungsanleitung

Airlink101

Airlink101 AWLL5077 Bedienungsanleitung

Airlink101

Airlink101 AWLC3026 Bedienungsanleitung

Airlink101

Airlink101 APL8511 Bedienungsanleitung

Airlink101

Airlink101 AWLL6070 Bedienungsanleitung

Airlink101

Airlink101 AGIGACB Bedienungsanleitung

Beliebte Adapter Handbücher anderer Marken

PCB Piezotronics

PCB Piezotronics 090B274 Bedienungsanleitung

Auvidea

Auvidea J20 Produkthandbuch

Gossen MetraWatt

Gossen MetraWatt AT3-III E Bedienungsanleitung

Akribis

Akribis ITF-21-BISS-MIT Bedienungsanleitung

Tenda

Tenda W54U Bedienungsanleitung

ROHO

ROHO AGILITY Bedienungsanleitung

PROLiNK

PROLiNK WN2001 Bedienungsanleitung

Hawking

Hawking HUF2 Bedienungsanleitung

NETGEAR

NETGEAR XAV101v1 - Powerline AV Ethernet Adapter Bedienungsanleitung

Philips

Philips SWA4554S/10 Bedienungsanleitung

JVC

JVC TS-C9D2B Gebrauchsanweisung

NETGEAR

NETGEAR A6100 Bedienungsanleitung

D-Link

D-Link DWA-121 Bedienungsanleitung

Philips

Philips SWA2037 Bedienungsanleitung

Basalte

Basalte 0610-20 Bedienungsanleitung

Yealink

Yealink EHS40 Bedienungsanleitung

Balluff

Balluff BIC 1B0-IT1A7-Q40KFU-SM4A4A Bedienungsanleitung

RCA

RCA AH57R Bedienungsanleitung