Airlink101 AWLL6077 Bedienungsanleitung
Quick Installation Guide
Wireless N USB Adapter
Model # AWLL6077
Install Utility Software
This Quick Installation Guide only provides the basic installation instructions.
For detailed installation instructions on advanced features, please refer to the
User’s Manual that can be found on the provided CD.
Step 1.1 Insert the USB adapter into an available USB port of your computer.
Step 1.2
Windows 2000/XP Users:Windows will launch the Found New Hardware
Wizard. The Found New Hardware Wizard appears differently depending on
your computer operating system, click Cancel to quit the wizard and insert the
Installation CD in the CD drive. Continue to Step 1.3.
Section 1
Ver. 1.0
Package Contents:
•Wireless N USB Adapter
•USB Cable
•Driver & Utility CD
•Quick Installation Guide
Windows Vista Users:Windows will install its built in drivers for this adapter.
Give permission to Windows to install the device driver software. After you see
the Windows message ‘Device driver software installed successfully’, insert the
Installation CD into the CD drive.
Step 1.3 The Autorun screen will pop up. Select Install Utility and Driver from
the menu.
Note: If the Autorun screen doesn’t appear automatically go to Start, Run, and
type D:\Utility\Setup.exe (where D is the letter of your CD drive) and click OK.
Windows Vista Users:When you get warning message(s), make sure that you
give permission to continue with the installation of the driver software.
Step 1.4 The Airlink101 WLAN Monitor screen will popup. Click Next at the
screen.
Step 1.5 Click Install to begin the installation.
Step 1.6 Give Permission to Window to install the driver software
For Windows Vista, click the Install this driver software anyway.
For Windows XP click Continue Anyway at the Windows Logo Screen.
For Windows 2000, click Yes at the Digital Signature Not Found prompt.
Windows will give you a popup message telling you it is installing the
AirLink101 Wireless device driver and the Airlink101 Wireless Monitor.
Step 1.7 Click Finish to complete the installation.
Configure the Wireless Adapter
Open the Airlink101 Wireless Monitor utility by double clicking on the Airlink101
Wireless Monitor Utility icon in the system tray at the bottom right-hand corner
of your screen.
Windows Vista will show:
Continue to Step 2.1
Section 2 Windows XP will show:
The Airlink101 Wireless Monitor of Windows XP gives you an option to Start or
Stop the Wireless Zero Configuration. It is not recommended to check this
Windows Zero Config box, if it is checked, you will be using the XP’s wireless
utility instead of the Airlink101 Wireless Monitor utility to monitor the connection.
Step 2.1
The Wi-Fi Protected Setup™ (WPS) is a new and easy way to configure the
encryption for your wireless network clients. In order to use it, you need to have
a router that supports this feature. If your router doesn’t support WPS, continue
to Step 2.2.
1. Push the WPS button of the Adaptor.
The ‘Wi-Fi Protected Setup – PBC method’ window will popup to
acknowledge you the Adapter is starting to establish a connection.
2. Push the WPS button of the Router. The picture shows Airlink101 AR670W
router.
3. The router will now start the handshake with the wireless Adapter. The
connection will be established in 2 minutes. Continue to Step 2.4.
If the connection is not able to establish, continue to Step 2.2.
Step 2.2 Click the Available Network tab of the Wireless Monitor, select the
SSID (Network Name) of the wireless network that you wish to connect to, and
click Add to Profile.
If the network that you are attempting to connect does not have encryption
enabled, you will receive a warning about connecting to an unsecured network.
Click OK to complete the connection. Go to Step 2.3.
If the network that you are attempting to connect is configured for encryption,
the Wireless Network Properties window will appear:
The Adapter may automatically detect the Network Authentication and the Data
encryption. You need to enter the security settings in the appropriate boxes
according to the settings of the router and then click OK to connect.
Please refer to the User’s Manual on the provided CD for instructions on
configuring the wireless network security settings.
Step 2.3 The connection is now established. Click on the Wireless Monitor
utility icon to check the status of the connection. The Status should be
Associated, and there will be green bars next to Signal Strength and Link
Quality.
Troubleshooting
If you are experiencing problems with the connection (unable to connect, low
signal strength, slow connection speed, not working, unstable wireless
connection) you may want to tune your router’s signal by changing the
channels on the router and/or by adjusting the direction of the antenna(s).
You do not need to change the channel on the Adapter; it will automatically pick
up the new channel after you reboot the router.
Your router has 11 different channels to choose from. Start from channel 1 and
work your way up. Each time you change the channel on the router, make sure
that you restart the computer that is connected to the router before trying to
connect again. Keep going through the channels until you find one that gives
you a stable connection.
For instructions on changing channels, refer to the documentation that comes
with the router.
Technical Support
E-mail: support@airlink101.com
Toll Free: 1-888-746-3238
Website: www.airlink101.com
*Theoretical maximum wireless signal rate derived from IEEE standard 802.11g and draft 802.11n specifications.
Actual data throughput will vary. Network conditions and environmental factors, including volume of network traffic,
building materials and construction, mix of wireless products used, radio frequency interference (e.g., cordless
telephones and microwaves) as well as network overhead lower actual data throughput rate. This product is
based on IEEE draft 802.11n specification and is not guaranteed to be compatible with future versions of IEEE
802.11n specification. Compatibility with draft 802.11n devices from other manufactures is not guaranteed.
Specifications are subject to change without notice. Photo of product may not reflect actual content. All products
and trademarks are the property of their respective owners. Copyright ©2009 Airlink101®
Section 3
Andere Handbücher für AWLL6077
1
Inhaltsverzeichnis
Andere Airlink101 Adapter Handbücher
Airlink101
Airlink101 AWLC4030 Bedienungsanleitung
Airlink101
Airlink101 AWLL5025 Bedienungsanleitung
Airlink101
Airlink101 AWLL3028 Bedienungsanleitung
Airlink101
Airlink101 AWLL6070 Bedienungsanleitung
Airlink101
Airlink101 AWLL5055 Bedienungsanleitung
Airlink101
Airlink101 AWLL3055 Bedienungsanleitung
Airlink101
Airlink101 ASOHOUSB Bedienungsanleitung
Airlink101
Airlink101 AWLC3025 Bedienungsanleitung
Airlink101
Airlink101 AWLC6045 Bedienungsanleitung
Airlink101
Airlink101 AWLL6077V2 Bedienungsanleitung
Airlink101
Airlink101 Wireless Cardbus Adapter AWLC3028 Bedienungsanleitung
Airlink101
Airlink101 AWLL5077 Bedienungsanleitung
Airlink101
Airlink101 AWLL5166HP Bedienungsanleitung
Airlink101
Airlink101 AWLC4130 Bedienungsanleitung
Airlink101
Airlink101 ABT-U200 Bedienungsanleitung
Airlink101
Airlink101 AWLL6090 Bedienungsanleitung
Airlink101
Airlink101 AWLL4030 Bedienungsanleitung
Airlink101
Airlink101 AWLC3026T Bedienungsanleitung
Airlink101
Airlink101 AWLL6080 Bedienungsanleitung
Airlink101
Airlink101 AWLC5025 Bedienungsanleitung
