Allen-Bradley Studio 5000 Logix Emulate Betriebsanleitung

Programming Manual

Logix 5000 Controllers Messages

1756 ControlLogix, 1756 GuardLogix, 1769 CompactLogix, 1769 Compact GuardLogix,

1789 SoftLogix, 5069 CompactLogix, 5069 Compact GuardLogix, Studio 5000 Logix Emulate

Important user information

Read this document and the documents listed in the additional resources section about installation, configuration, and operation of this equipment

before you install, configure, operate, or maintain this product. Users are required to familiarize themselves with installation and wiring instructions

in addition to requirements of all applicable codes, laws, and standards.

Activities including installation, adjustments, putting into service, use, assembly, disassembly, and maintenance are required to be carried out by

suitably trained personnel in accordance with applicable code of practice. If this equipment is used in a manner not specified by the manufacturer,

the protection provided by the equipment may be impaired.

In no event will Rockwell Automation, Inc. be responsible or liable for indirect or consequential damages resulting from the use or application of this

equipment.

The examples and diagrams in this manual are included solely for illustrative purposes. Because of the many variables and requirements associated

with any particular installation, Rockwell Automation, Inc. cannot assume responsibility or liability for actual use based on the examples and

diagrams.

No patent liability is assumed by Rockwell Automation, Inc. with respect to use of information, circuits, equipment, or software described in this

manual.

Reproduction of the contents of this manual, in whole or in part, without written permission of Rockwell Automation, Inc., is prohibited.

Throughout this manual, when necessary, we use notes to make you aware of safety considerations.

WARNING: Identifies information about practices or circumstances that can cause an explosion in a hazardous environment, which may lead to

personal injury or death, property damage, or economic loss.

ATTENTION: Identifies information about practices or circumstances that can lead to personal injury or death, property damage, or economic

loss. Attentions help you identify a hazard, avoid a hazard, and recognize the consequence

Important: Identifies information that is critical for successful application and understanding of the product.

Labels may also be on or inside the equipment to provide specific precautions.

SHOCK HAZARD: Labels may be on or inside the equipment, for example, a drive or motor, to alert people that dangerous voltage may be

present.

BURN HAZARD: Labels may be on or inside the equipment, for example, a drive or motor, to alert people that surfaces may reach dangerous

temperatures.

ARC FLASH HAZARD: Labels may be on or inside the equipment, for example, a motor control center, to alert people to potential Arc Flash. Arc

Flash will cause severe injury or death. Wear proper Personal Protective Equipment (PPE). Follow ALL Regulatory requirements for safe work

practices and for Personal Protective Equipment (PPE).

Allen-Bradley, Rockwell Software, Rockwell Automation, and TechConnect are trademarks of Rockwell Automation, Inc.

Trademarks not belonging to Rockwell Automation are property of their respective companies.

Rockwell Automation Publication 1756-PM012H-EN-P - February 2018 3

Summary of changes

This manual includes new and updated information. Use these reference tables to

locate changed information.

Grammatical and editorial style changes are not included in this summary.

Global changes

This table identifies changes that apply to all information about a subject in the

manual and the reason for the change. For example, the addition of new supported

hardware, a software design change, or additional reference material would result

in changes to all of the topics that deal with that subject.

Subject Reason

Updated screen shots throughout. The graphical user interface has been updated in release 31 of the

Logix Designer application.

Updated supported controllers. Logix Designer supports new 5069 Compact GuardLogix controllers.

New or enhanced features

This table contains a list of topics changed in this version, the reason for the

change, and a link to the topic that contains the changed information.

Topic Name Reason

Guidelines on page 15 Added tip that MSG tags can be created at the controller or Program Local

scope for some controllers in version 31 of the Logix Designer application.

Rockwell Automation Publication 1756-PM012H-EN-P - February 2018 5

Table of contents

Studio 5000 environment....................................................................................................7

Additional resources.............................................................................................................8

Legal notices ...........................................................................................................................8

Chapter 1

Introduction to Controller Messages............................................................................. 11

Supported data types ......................................................................................................... 11

Message Queue ................................................................................................................... 12

Cache list.............................................................................................................................. 13

Unconnected buffers......................................................................................................... 15

Guidelines............................................................................................................................ 15

Get or set the number of unconnected buffers............................................................. 16

Get the number of unconnected buffers................................................................ 16

Set the number of unconnected buffers................................................................. 16

Convert between INTs and DINTs............................................................................... 18

Chapter 2

Introduction........................................................................................................................ 23

Message manager logic....................................................................................................... 23

Chapter 3

Introduction........................................................................................................................ 27

Configure the I/O configuration.................................................................................... 28

Define your source and destination elements............................................................... 29

Create the MESSAGE_ CONFIGURATION data type......................................... 30

Create the configuration array......................................................................................... 31

Get the size of the local array ........................................................................................... 32

Load the message properties for a controller ................................................................ 33

Configure the message....................................................................................................... 34

Step to the next controller................................................................................................ 34

Restart the sequence .......................................................................................................... 35

Preface

Controller messages

Manage multiple messages

Send a message to multiple

controllers

Index

Rockwell Automation Publication 1756-PM012H-EN-P - February 2018 7

Preface

This manual shows how to program message (MSG) instructions to and from

Logix 5000™ controllers. This manual is one of a set of related manuals that show

common procedures for programming and operating Logix 5000™ controllers.

For a complete list of common procedures manuals, refer to the Logix 5000

Controllers Common Procedures Programming Manual, publication 1756-

PM001.

•The term Logix 5000 controller refers to any controller that is based on the

Logix 5000 operating system.

The Studio 5000 Automation Engineering & Design Environment® combines

engineering and design elements into a common environment. The first element is

the Studio 5000 Logix Designer® application. The Logix Designer application is

the rebranding of RSLogix 5000® software and will continue to be the product to

program Logix 5000™ controllers for discrete, process, batch, motion, safety, and

drive-based solutions.

The Studio 5000® environment is the foundation for the future of

Rockwell Automation® engineering design tools and capabilities. The Studio 5000

environment is the one place for design engineers to develop all elements of their

control system.

Studio 5000 environment

Preface

8Rockwell Automation Publication 1756-PM012H-EN-P - February 2018

These documents contain additional information concerning related Rockwell

Automation products.

Resource Description

Industrial Automation Wiring and Grounding Guidelines,

publication 1770-4.1

Provides general guidelines for installing a Rockwell

Automation industrial system.

Product Certifications webpage, available at

http://ab.rockwellautomation.com

Provides declarations of conformity, certificates, and other

certification details.

You can view or download publications at

http://www.rockwellautomation.com/literature. To order paper copies of

technical documentation, contact your local Rockwell Automation distributor or

sales representative.

Printed in USA.

This document and any accompanying Rockwell Software products are

copyrighted by Rockwell Automation Technologies, Inc. Any reproduction

and/or distribution without prior written consent from Rockwell Automation

Technologies, Inc. is strictly prohibited. Please refer to the license agreement for

details.

End User License Agreement (EULA)

You can view the Rockwell Automation End-User License Agreement ("EULA")

by opening the License.rtf file located in your product's install folder on your hard

drive.

Other Licenses

The software included in this product contains copyrighted software that is

licensed under one or more open source licenses. Copies of those licenses are

included with the software. Corresponding Source code for open source packages

included in this product can be located at their respective web site(s).

You may alternately obtain complete Corresponding Source code by contacting

Rockwell Automation via our Contact form on the Rockwell Automation

website: http://www.rockwellautomation.com/global/about-

us/contact/contact.page.

Please include "Open Source" as part of the request text.

Additional resources

Legal notices

Preface

Rockwell Automation Publication 1756-PM012H-EN-P - February 2018 9

A full list of all open source software used in this product and their corresponding

licenses can be found in the OPENSOURCE folder included with the Release

Notes. The default installed location of these licenses is C:\Program Files

(x86)\Common

Files\Rockwell\Help\<Product>\ReleaseNotes\OPENSOURCE\index.htm.

Trademark Notices

Allen-Bradley, ControlBus, ControlFLASH, Compact GuardLogix, Compact

I/O, ControlLogix, CompactLogix, DCM, DH+, Data Highway Plus,

DriveLogix, DPI, DriveTools, Explorer, FactoryTalk, FactoryTalk Administration

Console, FactoryTalk Alarms and Events, FactoryTalk Batch, FactoryTalk

Directory, FactoryTalk Security, FactoryTalk Services Platform, FactoryTalk

View, FactoryTalk View SE, FLEX Ex, FlexLogix, FLEX I/O, Guard I/O, High

Performance Drive, Integrated Architecture, Kinetix, Logix5000, Logix 5000,

Logix5550, MicroLogix, DeviceNet, EtherNet/IP, PLC-2, PLC-3, PLC-5,

PanelBuilder, PowerFlex, PhaseManager, POINT I/O, PowerFlex, Rockwell

Automation, RSBizWare, Rockwell Software, RSEmulate, Historian, RSFieldbus,

RSLinx, RSLogix, RSNetWorx for DeviceNet, RSNetWorx for EtherNet/IP,

RSMACC, RSView, RSView32, Rockwell Software Studio 5000 Automation

Engineering & Design Environment, Studio 5000 View Designer, SCANport,

SLC, SoftLogix, SMC Flex, Studio 5000, Ultra 100, Ultra 200, VersaView,

WINtelligent, XM, SequenceManager are trademarks of Rockwell Automation,

Inc.

Any Rockwell Automation logo, software or hardware product not mentioned

herein is also a trademark, registered or otherwise, of Rockwell Automation, Inc.

Other Trademarks

CmFAS Assistant, CmDongle, CodeMeter, CodeMeter Control Center, and

WIBU are trademarks of WIBU-SYSTEMS AG in the United States and/or

other countries. Microsoft is a registered trademark of Microsoft Corporation in

the United States and/or other countries. ControlNet is a trademark of

ControlNet International. DeviceNet is a trademark of the Open DeviceNet

Vendors Association (ODVA). Ethernet/IP is a trademark of ControlNet

International under license by ODVA.

All other trademarks are the property of their respective holders and are hereby

acknowledged.

Warranty

This product is warranted in accordance with the product license. The product’s

performance may be affected by system configuration, the application being

performed, operator control, maintenance, and other related factors. Rockwell

Automation is not responsible for these intervening factors. The instructions in

Preface

10 Rockwell Automation Publication 1756-PM012H-EN-P - February 2018

this document do not cover all the details or variations in the equipment,

procedure, or process described, nor do they provide directions for meeting every

possible contingency during installation, operation, or maintenance. This

product’s implementation may vary among users.

This document is current as of the time of release of the product; however, the

accompanying software may have changed since the release. Rockwell Automation,

Inc. reserves the right to change any information contained in this document or

the software at any time without prior notice. It is your responsibility to obtain the

most current information available from Rockwell when installing or using this

product.

Environmental compliance

Rockwell Automation maintains current product environmental information on

its website at http://www.rockwellautomation.com/rockwellautomation/about-

us/sustainability-ethics/product-environmental-compliance.page

Contact Rockwell Automation

Customer Support Telephone — 1.440.646.3434

Online Support — http://www.rockwellautomation.com/support/

Andere Handbücher für Studio 5000 Logix Emulate

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Allen-Bradley Controller Handbücher

Allen-Bradley

Allen-Bradley GuardPLC 160 Bedienungsanleitung

Allen-Bradley

Allen-Bradley SMC-3 Bedienungsanleitung

Allen-Bradley

Allen-Bradley SLC 500 Bedienungsanleitung

Allen-Bradley

Allen-Bradley 1756-L5 Betriebsanleitung

Allen-Bradley

Allen-Bradley Logix5000 Series Betriebsanleitung

Allen-Bradley

Allen-Bradley PowerFlex 4 Bedienungsanleitung

Allen-Bradley

Allen-Bradley GuardLogix Bedienungsanleitung

Allen-Bradley

Allen-Bradley Micro800 Bedienungsanleitung

Allen-Bradley

Allen-Bradley PowerFlex 4 Bedienungsanleitung

Allen-Bradley

Allen-Bradley 1336 PLUS II Bedienungsanleitung

Allen-Bradley

Allen-Bradley PowerFlex 525 Bedienungsanleitung

Allen-Bradley

Allen-Bradley Micro800 Gebrauchsanweisung

Allen-Bradley

Allen-Bradley CompactLogix 5480 Bedienungsanleitung

Allen-Bradley

Allen-Bradley CompactLogix 1769-L20 Bedienungsanleitung

Allen-Bradley

Allen-Bradley PowerFlex 70 Bedienungsanleitung

Allen-Bradley

Allen-Bradley Kinetix 6000 Bedienungsanleitung

Allen-Bradley

Allen-Bradley 2080-LC20-20QBB Bedienungsanleitung

Allen-Bradley

Allen-Bradley MicroLogix 1000 PLC Leitfaden

Allen-Bradley

Allen-Bradley PowerFlex40 Bedienungsanleitung

Allen-Bradley

Allen-Bradley 2080-IQ4 Bedienungsanleitung

Allen-Bradley

Allen-Bradley AADvance T9110 Benutzerhandbuch

Allen-Bradley

Allen-Bradley powerflex 700 Bedienungsanleitung

Allen-Bradley

Allen-Bradley 1769 CompactLogix Bedienungsanleitung

Allen-Bradley

Allen-Bradley 2080-LC20-20QWB Bedienungsanleitung

Beliebte Controller Handbücher anderer Marken

Digiplex

Digiplex DGP-848 Betriebsanleitung

YASKAWA

YASKAWA SGM series Bedienungsanleitung

Sinope

Sinope Calypso RM3500ZB Bedienungsanleitung

Isimet

Isimet DLA Series Style 2 Installationshandbuch

LSIS

LSIS sv-ip5a Bedienungsanleitung

Rockwell Automation

Rockwell Automation 1769-L31 Bedienungsanleitung

Airflow

Airflow Uno hab Bedienungsanleitung

ABB

ABB ACS580-01 drives Bedienungsanleitung

Panasonic

Panasonic GM1 Series Bedienungsanleitung

Emerson

Emerson SW93 Bedienungsanleitung

AutoAqua

AutoAqua Smart ATO micro SATO-120P Bedienungsanleitung

Panasonic

Panasonic FP? Positioning Unit RTEX Bedienungsanleitung

Samson

Samson Type 5824 Service-Handbuch

Alpha IP

Alpha IP MIOB 21001 Bedienungsanleitung

Siemens

Siemens OpenAir GMA 1 Series Bedienungsanleitung

Surecom

Surecom SR-629 Bedienungsanleitung

Fishman

Fishman TriplePlay Bedienungsanleitung

Regulus

Regulus SRS1 T Bedienungsanleitung