Allen-Bradley 1492-CM1771-LD005 Bedienungsanleitung

Digital I/O Conversion Module

(Cat 1492-CM1771-LD005)

PN-114277

DIR 10000060088 (Version 01)

Publication 1492-IN035B-EN-E

Printed in U.S.A.

I. Description

This Digital I/O Conversion Module provides for the conversion of (1) 1771, 32 point I/O modules to be converted to

(1) 1756, 32 point I/O module and consists of the following:

(1) 1771 Module (32pt) to (1) 1756 Module (32pt)

(2) Conversion Module: 1492-CM1771-LD005

(1) Cable: 1492-CONCAB005Z (Table 2, Section III)

(1) Conversion Mounting Assembly: 1492-MUA… (Table 1, Section II)

This conversion is accomplished without the removal of any field wires from the existing 1771 Swing Arm. The exist-

ing 1771 Swing Arm fits directly onto the edge connector of the 1492 Conversion Module. On one end of the 1492

Cable is (1) connector for the Conversion Module. On the other end is the Removable Terminal Block (RTB) for the

1756 I/O module, as shown in the photo below. The I/O signals are routed through the 1492 Conversion Module and

the 1492 Cable to the appropriate terminals on the 1756 I/O module per the Wiring Diagrams in Section V. As stan-

dard, both portions of the 1492 Cables are 0.5M long, but we also offer a 1.0M cable length. Refer to the footnotes in

Table 2, Section III for further details.

De-energize and lockout any and all power to all I/O field devices connected to the A-B 1771 I/O chassis,

and the power to the 1771 I/O chassis itself. Ensure all power is de-energized and locked out to any

device in the control cabinet where the conversion is to be performed. Ensure work is performed by

qualified personnel.

WARNING

1492-CM1771-LD005 Conversion Module

Conversion Compatibility and

Product I.D. Label

37-Pin Connector for cable 1492-CONCAB

Z

(2)

PN-114277

DIR 10000060088 (Version 01)

Publication 1492-IN035B-EN-E

II. Installation

The 1492 Conversion Modules must be installed in a 1492 Conversion Mounting Assembly (see Table 1 below). A

complete System Installation Manual ships with the 1492 Conversion Mounting Assembly.

1) Determine the quantity of each type of 1771 I/O modules used in the 1771 I/O Chassis to be converted.

2) Select the applicable 1492 Conversion Modules from Table 2, Section III.

3) Review the Max Slots for I/O and Chassis Width data from the Table 1 below.

4) Select a 1756 I/O Chassis which has enough I/O Slots.

NOTE: (2) I/O slots are required in the 1756 Chassis for conversions where (1) 1771 I/O module converts to (2) 1756 I/O

modules.

5) Select the 1492 Conversion Mounting Assembly which has enough Conversion Module slots.

NOTE: (2) Conversion Module slots are required in the 1492 Conversion Mounting Assembly for conversions where (2)

1771 I/O module convert to (1) 1756 I/O modules.

NOTE: The 1492 Conversion Mounting Assembly has the same Height & Width foot-print as the 1771 Chassis and is

designed to use the same mounting hardware. The combined Depth of the 1492 Conversion Mounting Assembly with the

1756 Chassis mounted on top is 10.25 inches (Controller w/key) or 10.0 inches (Controller w/o key). Dimension drawings

are included in the System Installation Manual that ships with the 1492 Conversion Mounting Assembly.

Foo

es:



1771-A3B is not listed as it is used for 19 inch wide instrumentation panels.

Notice that the 1756 Chassis Width sometimes exceeds the 1771 Chassis Width, with or without the Power

Supply. The Cover-Plate of the 1492 Conversion Mounting Assembly allows the 1756 Chassis to be Left justified,

Right justified or Centered. A complete System Installation Manual ships with the 1492 Conversion Mounting

Assembly.

1771 Chassis 1756 Chassis Conversion Mounting Assembly

Chassis Width

Cat. No.

Max

Slots

for

I/O

without

Power

Supply

with

Power

Supply

Cat. No.

Max

Slots

for

I/O

Chassis

Width Cat. No.

Max Slots

for

Conversion

Modules

Chassis

Width

1756-A4 3 10.35

1771-A1B 4 9.01 12.61

1756-A7 6 14.49

1492-MUA1B-A4-A7 4 9.01

1756-A7 6 14.49

1771-A2B 8 14.01 17.61

1756-A10 9 19.02

1492-MUA2B-A7-A10 8 14.01

1756-A10 9 19.02

1771-A3B1 12 19.01 1756-A13 12 23.15

1492-MUA3-A10-A13 12 19.01

1756-A13 12 23.15

1771-A4B 16 24.01 1756-A17 16 29.06

1492-MUA4-A13-A17 16 24.01

Table 1: Bulletin 1771 to 1756 Chassis Conversion



(3)

IV. Conversion Module Specifications

(Operating specifications are when installed in the Conversion System base / cover-plate assembly)

PN-114277

DIR 10000060088 (Version 01)

Publication 1492-IN035B-EN-E

III. Compatiblity

Foo

t N

es:



To understand any issues concerning I/O module compatibility, refer to the Installation Manuals for the specific

771 and 1756 I

modules involved



The 3 numbers indicate the cable length of each portion of the 1492 Cable. Recommended cable lengths of 0.5M

are shown. Additional cable lengths are as

ollows:

.0M = 1492-

AB010

Table 2: Bulletin 1771 to 1756 Conversion Modules and Cables

1771

Digital I/O Module



1756

Digital I/O Module



1492

Conversion Module

1492

Cable



1771-IVN 1756-IV32 1492-CM1771-LD005 1492-CONCAB005Z

Specification

Dimensions

Approximate Shipping Weight

11.81 in. (height) x 4.38 in. (depth) x 1.5 in. (width)

300 mm. (height) x 111.25 mm (depth) x 38.1 mm (width)

242.1 g (0.53 lbs) (includes carton)

Storage Temperature -40 to +85°C (-40 to +185°F)

Operating Temperature

0 to 60°C (32 to 140°F)

Operating Humidity

5 to 95% at 60°C (non-condensing)

Shock

Non

operating

Operating

50g

30g

Operating Vibration

2g at 10 to 500Hz (Agrees with 1756 I/O module specifications)

Maximum Operating Voltage

30 Vdc

Max. Module Operating Current

Per Point:

Per Module:

2 Amps

4 Amps

Agency Certifications

UL Classified: Under UL File Number E113724

CSA

CE: compliant for all applicable directives

Pollution Degree

Environmental Rating

IP20

Refer to the Wiring Diagram(s) for

current limits for a specific configuration.

NOTICE

Value

There are several key application considerations and system specifications (bottom of drawing) when

using these components (conversion module, cable and input module). Read and understand these

considerations before installation.

WARNING

PN-114277

DIR 10000060088 (Version 01)

Publication 1492-IN035B-EN-E

Printed in U.S.A.

V. Wiring Diagrams Conversion: 1771-IVN to 1756-IV32

18 DC-0 (+)

IN-0

IN-16

IN-1

IN-17

IN-2

IN-18

IN-3

IN-19

IN-4

IN-20

IN-5

IN-21

IN-6

IN-22

Black

White

Red

Green

Orange

Blue

White/Black

Red/Black

Green/Black

Orange/Black

Blue/Black

Black/White

Red/White

Green/White

Blue/White

Black/Red

White/Red

Orange/Red

Blue/Red

Red/Green

IN-7

DC-1 (+)

IN-23

IN-8

IN-24

IN-9

IN-25

IN-10

IN-26

IN-11

IN-27

IN-12

IN-28

IN-13

IN-29

IN-14

IN-30

Orange/Green

Black/White/Red

White/Black/Red

Red/Black/White

Green/Black/White

Orange/Black/White

Blue/Black/White

Black/Red/Green

White/Red/Green

Red/Black/Green

Green/Black/Orange

Orange/Black/Green

Blue/White/Orange

Black/White/Orange

White/Red/Orange

Orange/White/Blue

IN-15

IN-31

17 DC-0 (+)

White/Red/Blue DC-1 (+)

Input 01

Input 02

Input 03

Input 04

Input 05

Input 06

Input 07

Input 10

Input 11

Input 10

Input 12

Input 13

Input 14

Input 15

Input 16

Input 17

Input 00

10-30V dc (0)

Input 00

Input 11

Input 12

10-30V dc (2)

10-30V dc (0)

10-30V dc (1)

10-30V dc (3)

10-30V dc (2)

10-30V dc (3)

Conversion Module Installation and Application Considerations



The input delay times for the 1771-IVN module versus 1756-IV32 module are as follows:

1771-IVN 1756-IV32

a) Off-to-On Delay 6ms (+/-2ms) 1ms (plus selectable filter)

b) On-to-Off Delay 6ms (+/-2ms) 2ms (plus selectable filter)



The 1771-IVN has 4 groups (allowing 4 seperate power supplies) and the 1756-IV32 has 2 groups.

This module/cable combination ties Groups 0 & 1 from the 1771-IVN to Group 0 on the 1756-IV32 and it ties Groups 2 & 3

from the 1771-IVN to Group 1 on the 1756-IV32.Field wiring modification must be made to accommodate this if multiple

supplies were used. If 4 supplies were used, 2 must be removed.



Refer to your 1771-IVN and 1756-IV32 Installation Manual wiring schematics and diagrams for more details.

[Reference Doc: 41170-934 (Version 02)]

1771-WN Swing Arm

From 1771-IVN

Conversion Module

1492-CM1771-LD005

Cable

1492-CONCAB005Z1756-IV32

Dieses Handbuch passt für folgende Modelle

Andere Allen-Bradley E/A-System Handbücher

Allen-Bradley

Allen-Bradley ArmorBlock MaXum 4 Bedienungsanleitung

Allen-Bradley

Allen-Bradley FlexLogix 1794 Bedienungsanleitung

Allen-Bradley

Allen-Bradley 1397-L11 Bedienungsanleitung

Allen-Bradley

Allen-Bradley 1794-IE12 Bedienungs- und Wartungshandbuch

Allen-Bradley

Allen-Bradley SLC 500 Bedienungsanleitung

Allen-Bradley

Allen-Bradley 2071-TBIO Bedienungsanleitung

Allen-Bradley

Allen-Bradley 1794-IA8 Service-Handbuch

Allen-Bradley

Allen-Bradley Rockwell Automation 1734-AENT Bedienungsanleitung

Allen-Bradley

Allen-Bradley MicroLogix 1200 RTD/Resistance Bedienungsanleitung

Allen-Bradley

Allen-Bradley 1794-IF4I Bedienungsanleitung

Allen-Bradley

Allen-Bradley SLC 500 1746-NI4 Bedienungsanleitung

Allen-Bradley

Allen-Bradley 1734-OE4C Bedienungsanleitung

Allen-Bradley

Allen-Bradley 1756 ControlLogix Bedienungsanleitung

Allen-Bradley

Allen-Bradley 1794-IRT8 Bedienungsanleitung

Allen-Bradley

Allen-Bradley ArmorBlock LP2 Bedienungsanleitung

Allen-Bradley

Allen-Bradley Bulletin 5370 CVIM Bedienungsanleitung

Allen-Bradley

Allen-Bradley SLC 500 Bedienungsanleitung

Allen-Bradley

Allen-Bradley 1746-IA4 Bedienungsanleitung

Allen-Bradley

Allen-Bradley MicroLogix 1762-IQ32T Bedienungsanleitung

Allen-Bradley

Allen-Bradley Flex I/O Bedienungsanleitung

Allen-Bradley

Allen-Bradley 2097-TB1 Bedienungsanleitung

Allen-Bradley

Allen-Bradley POINT I/O 1734-IV2 Bedienungsanleitung

Allen-Bradley

Allen-Bradley ControlLogix 1756-IG16 Bedienungsanleitung

Allen-Bradley

Allen-Bradley 1794-IB8 Bedienungsanleitung

Beliebte E/A-System Handbücher anderer Marken

WAGO

WAGO 750-344 Bedienungsanleitung

Teknim

Teknim TWM-1887 Bedienungsanleitung

Intelligent Appliance

Intelligent Appliance IA-2662-E Bedienungsanleitung

BERGHOF

BERGHOF ECC DIO 16/16 Bedienungsanleitung

Advantech

Advantech PCM-27J3AU Installations- und Betriebshandbuch

Festo

Festo CP-E08-M12-CL Bedienungsanleitung

Measurement Computing

Measurement Computing PCI-DAS64/M1/16 Bedienungsanleitung

Hitachi

Hitachi HX-RIO3 Series Bedienungsanleitung

NUUO

NUUO SCB-A08 Bedienungsanleitung

M-system

M-system R3Y-RS8 Bedienungsanleitung

jablotron

jablotron JB-110N Bedienungsanleitung

Omron

Omron SYSMAC C200H Bedienungsanleitung

DOLD

DOLD SAFEMASTER M Bedienungsanleitung

ABB

ABB OPT-MF-001 Bedienungsanleitung

Omron

Omron SYSMAC C2000H Bedienungsanleitung

Helmholz

Helmholz TB20 Bedienungsanleitung

ICP DAS USA

ICP DAS USA tM-AD2 Bedienungsanleitung

Automationdirect.com

Automationdirect.com DL305 Bedienungsanleitung